Re: Booting Yocto on i.MX35

[Gary Thomas <gary@mlbassoc.com>]

On 2013-06-17 13:36, Gary Thomas wrote:
> On 2013-06-17 12:04, Fabio Estevam wrote:
>> On Mon, Jun 17, 2013 at 5:05 AM, Gary Thomas <gary@mlbassoc.com> wrote:
>>
>>> How did you select this?  The only options I can see for building Freescale
>>> IMX
>>> systems use device tree which is not there for i.MX35
>>
>> It is selected by default.
>>
>> When I build a kernel manually for mx35 I do:
>>
>> make imx_v6_v7_defconfig
>> make -j4 uImage LOADADDR=0x80008000
>>
>> imx_v6_v7_defconfig supports both dt and non-dt imx platorms.
>>
>
> I'll try that manually.

Manual build using this configuration file does work.  However, there
are a lot of bits missing, e.g. frame buffer and camera.  How do I enable
(use?) them on the PDK?

>
> How do I configure my Yocto build to use this setup automatically?

I'll send some patches shortly to set this up properly.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------