All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Peter Vágner" <pvdeejay@gmail.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] Tplink TL-WN822N drops out connections randomly on Arch Linux with Kernel 3.9.4 (Mark Lee)
Date: Tue, 18 Jun 2013 20:20:01 +0200	[thread overview]
Message-ID: <51C0A4D1.1050604@gmail.com> (raw)
In-Reply-To: <51AB7A41.9050206@rempel-privat.de>

Hello,
I do also have similar device and am facing a strange problem with it.
After booting up the machine I am unable to connect to certain wireless 
AP. That is an old Owislink WL5460 router set up in 2.4B+G mode with WPA 
encryption.
After connecting to another AP e.g. non encrypted AP made up of my 
Android phone or even encrypted AP created on an iphone I can then 
connect to the problematic AP.
I am on arch linux currently with kernel 3.9.6. The issue started 
happening as I have updated my kernel to 3.9.1. Previously everything 
has been working fine wor me.

Here are some more details

$ lsusb | grep Ather
Bus 002 Device 005: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n

$ iw dev wlp0s26u1u6 get power_save
Power save: off


$ dmesg | grep 00:4f:62:05:df:2d
[   23.237360] wlp0s26u1u6: authenticate with 00:4f:62:05:df:2d
[   23.331989] wlp0s26u1u6: send auth to 00:4f:62:05:df:2d (try 1/3)
[   26.376049] wlp0s26u1u6: send auth to 00:4f:62:05:df:2d (try 2/3)
[   28.335490] wlp0s26u1u6: deauthenticating from 00:4f:62:05:df:2d by 
local choice (reason=3)
--- snip ---
This is repeating over and over again until I connect to something else.
And then the final successfull connection to this AP looks like...
[  252.381096] wlp0s26u1u6: authenticate with 00:4f:62:05:df:2d
[  252.520920] wlp0s26u1u6: send auth to 00:4f:62:05:df:2d (try 1/3)
[  252.524098] wlp0s26u1u6: associate with 00:4f:62:05:df:2d (try 1/3)
[  252.538293] wlp0s26u1u6: RX AssocResp from 00:4f:62:05:df:2d 
(capab=0x411 status=0 aid=3)

$ dmesg | grep ath9k_htc
[    7.353707] usb 2-1.6: ath9k_htc: Firmware htc_9271.fw requested
[    7.353772] usbcore: registered new interface driver ath9k_htc
[    7.829552] usb 2-1.6: ath9k_htc: Transferred FW: htc_9271.fw, size: 
51272
[    8.064565] ath9k_htc 2-1.6:1.0: ath9k_htc: HTC initialized with 33 
credits
[    8.255145] ath9k_htc 2-1.6:1.0: ath9k_htc: FW Version: 1.3
[  252.522905] ath9k_htc 2-1.6:1.0 wlp0s26u1u6: disabling HT as WMM/QoS 
is not supported by the AP
[  252.522908] ath9k_htc 2-1.6:1.0 wlp0s26u1u6: disabling VHT as WMM/QoS 
is not supported by the AP

$ sudo iw dev wlp0s26u1u6 scan dump
BSS 00:4f:62:05:df:2d(on wlp0s26u1u6) -- associated
     TSF: 254735798022 usec (2d, 22:45:35)
     freq: 2412
     beacon interval: 100 TUs
     capability: ESS Privacy ShortSlotTime (0x0411)
     signal: -61.00 dBm
     last seen: 103493 ms ago
     Information elements from Probe Response frame:
     SSID: predok
     Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
     DS Parameter set: channel 1
     ERP: <no flags>
     Extended supported rates: 24.0 36.0 48.0 54.0
     WPA:     * Version: 1
          * Group cipher: TKIP
          * Pairwise ciphers: TKIP
          * Authentication suites: PSK
     RSN:     * Version: 1
          * Group cipher: TKIP
          * Pairwise ciphers: CCMP
          * Authentication suites: PSK
          * Capabilities: (0x0000)

$ sudo iw dev wlp0s26u1u6 scan dump
[sudo] password for peto:
BSS 00:4f:62:05:df:2d(on wlp0s26u1u6)
     TSF: 255417536590 usec (2d, 22:56:57)
     freq: 2412
     beacon interval: 100 TUs
     capability: ESS Privacy ShortSlotTime (0x0411)
     signal: -59.00 dBm
     last seen: 386 ms ago
     Information elements from Probe Response frame:
     SSID: predok
     Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
     DS Parameter set: channel 1
     ERP: <no flags>
     Extended supported rates: 24.0 36.0 48.0 54.0
     WPA:     * Version: 1
          * Group cipher: TKIP
          * Pairwise ciphers: TKIP
          * Authentication suites: PSK
     RSN:     * Version: 1
          * Group cipher: TKIP
          * Pairwise ciphers: CCMP
          * Authentication suites: PSK
          * Capabilities: (0x0000)



Thanks and greetings

Peter

On 02.06.2013 19:00, Oleksij Rempel wrote:
> Can you please do some test:
> - disable STBC on access point. You will probably need to edit
> hostapd.conf manually.
> - change or disable encryption type.
>
>
> Am 02.06.2013 18:39, schrieb Mark E. Lee:
>> Access Point Firmware:  DD-WRT v24-sp2 (03/19/12) std
>> Access Point Hardware:  netgear-wnr2000v3
>>
>> Output of # iw dev wlan0 get power_save :
>> Power save: off
>>
>> Output of $ iw dev wlan0 scan dump :
>> Attached log file (unix ending)
>>
>> On Sun, 2013-06-02 at 12:00 +0200, ath9k-devel-request at lists.ath9k.org
>> wrote:
>>> Send ath9k-devel mailing list submissions to
>>> 	ath9k-devel at lists.ath9k.org
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> 	https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>>> or, via email, send a message with subject or body 'help' to
>>> 	ath9k-devel-request at lists.ath9k.org
>>>
>>> You can reach the person managing the list at
>>> 	ath9k-devel-owner at lists.ath9k.org
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of ath9k-devel digest..."
>>>
>>>

  reply	other threads:[~2013-06-18 18:20 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <mailman.1.1370167201.11487.ath9k-devel@lists.ath9k.org>
2013-06-02 16:39 ` [ath9k-devel] Tplink TL-WN822N drops out connections randomly on Arch Linux with Kernel 3.9.4 (Mark Lee) Mark E. Lee
2013-06-02 17:00   ` Oleksij Rempel
2013-06-18 18:20     ` Peter Vágner [this message]
2013-06-18 19:41       ` Oleksij Rempel
2013-06-18 19:52         ` Peter Vágner
2013-06-18 19:54           ` Mark E. Lee
2013-06-18 20:40           ` Oleksij Rempel
     [not found] <mailman.1.1370340001.351.ath9k-devel@lists.ath9k.org>
2013-06-05 19:43 ` Mark E. Lee
2013-06-03 18:44 Mark E. Lee
2013-06-03 19:25 ` Adrian Chadd
  -- strict thread matches above, loose matches on Subject: below --
2013-06-01 17:00 Mark E. Lee
2013-06-01 17:22 ` Oleksij Rempel
2013-06-01 16:55 Mark E. Lee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51C0A4D1.1050604@gmail.com \
    --to=pvdeejay@gmail.com \
    --cc=ath9k-devel@lists.ath9k.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.