From: Bernd Krumboeck <krumboeck@universalnet.at>
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "linux-can@vger.kernel.org" <linux-can@vger.kernel.org>,
Michael Olbrich <mol@pengutronix.de>
Subject: Re: 8devices problem on usb-3.0 host
Date: Tue, 18 Jun 2013 20:21:17 +0200 [thread overview]
Message-ID: <51C0A51D.8010802@universalnet.at> (raw)
In-Reply-To: <51C0533D.5030502@pengutronix.de>
Am 2013-06-18 14:31, schrieb Marc Kleine-Budde:
> Hello Bernd,
>
> my college Michael is using the 8 devices usb dongle on an USB-3.0 host
> and it fails with:
>
>> [ 1686.609330] can: raw protocol (rev 20120528)
>> [ 3347.787587] usb_8dev 3-1.2:1.0 can0: Rx URB aborted (-32)
>> [ 3347.788319] usb_8dev 3-1.2:1.0 can0: Rx URB aborted (-32)
>> [ 3347.789050] usb_8dev 3-1.2:1.0 can0: Rx URB aborted (-32)
...
>> [ 3347.897224] usb_8dev 3-1.2:1.0 can0: Rx URB aborted (-32)
>> [ 3347.897725] usb 3-1.2: USB disconnect, device number 8
>> [ 3347.898037] usb_8dev 3-1.2:1.0 can0: device disconnected
>> [ 3347.898058] usb_8dev 3-1.2:1.0 can0: sending command message failed
>> [ 3347.898062] usb_8dev 3-1.2:1.0 can0: couldn't stop device
>> [ 3354.974145] usb 1-2: new full-speed USB device number 5 using xhci_hcd
>> [ 3354.974366] usb 1-2: Device not responding to set address.
>> [ 3355.184387] usb 1-2: Device not responding to set address.
>> [ 3355.394243] usb 1-2: device not accepting address 5, error -71
>> [ 3355.514288] usb 1-2: new full-speed USB device number 6 using xhci_hcd
>> [ 3355.536209] usb 1-2: New USB device found, idVendor=0483, idProduct=1234
>> [ 3355.536216] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> [ 3355.536220] usb 1-2: Product: USB2CAN converter
>> [ 3355.536224] usb 1-2: Manufacturer: edevices
>> [ 3355.536227] usb 1-2: SerialNumber: ED000210
>> [ 3356.635802] usb_8dev 1-2:1.0 can0: no command message answer
>> [ 3356.635811] usb_8dev 1-2:1.0 can0: can't get firmware version
>
> Then the driver oopes; I already have a patch for the oops, I'll send it
> around soon.
>
> Marc
>
Hello Marc!
My tests also failed. :-(
System:
Linux debian 3.2.0-4-amd64
Asus U3S6 PCIe x4
USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
dmesg:
[87087.312019] usb 2-2: new full-speed USB device number 4 using xhci_hcd
[87087.312300] usb 2-2: Device not responding to set address.
[87087.516288] usb 2-2: Device not responding to set address.
[87087.720009] usb 2-2: device not accepting address 4, error -71
[87087.832025] usb 2-2: new full-speed USB device number 5 using xhci_hcd
[87087.877433] usb 2-2: New USB device found, idVendor=0483, idProduct=1234
[87087.877437] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[87087.877440] usb 2-2: Product: USB2CAN converter
[87087.877442] usb 2-2: Manufacturer: edevices
[87087.877444] usb 2-2: SerialNumber: ED000202
[87087.877704] xhci_hcd 0000:06:00.0: ERROR: unexpected command completion code 0x11.
[87087.877712] usb 2-2: can't set config #1, error -22
Maybe a firmware bug?
Any ideas are highly welcome...
Firmware:
https://github.com/krumboeck/usb2can_firmware
regards,
Bernd
prev parent reply other threads:[~2013-06-18 18:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-18 12:31 8devices problem on usb-3.0 host Marc Kleine-Budde
2013-06-18 18:21 ` Bernd Krumboeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C0A51D.8010802@universalnet.at \
--to=krumboeck@universalnet.at \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=mol@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.