From: Oleksij Rempel <linux@rempel-privat.de>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] Tplink TL-WN822N drops out connections randomly on Arch Linux with Kernel 3.9.4 (Mark Lee)
Date: Tue, 18 Jun 2013 22:40:03 +0200 [thread overview]
Message-ID: <51C0C5A3.30301@rempel-privat.de> (raw)
In-Reply-To: <51C0BA93.8080109@gmail.com>
Am 18.06.2013 21:52, schrieb Peter V?gner:
> Hello,
> I am afraid I don't know how to do this.
> Do I have to recompile the whole kernel testing each commit or should I
> just recompile the driver or even track firmware changes?
if you didn't updated firmware, then no.
You should recompile complete kernel.
> Can you please point me to somewhere where I can read on how to proceed?
use google. here is one example:
http://www.project-insanity.org/2013/02/how-i-found-a-kernel-regression-using-git-bisect/
> Greetings
>
> Peter
>
>
> On 18.06.2013 21:41, Oleksij Rempel wrote:
>> Hi Peter,
>>
>> if it is regression, can you please do git bisect to find commit
>> affecting your connection. It can be outside of ath9k_htc source.
>>
>> Am 18.06.2013 20:20, schrieb Peter V?gner:
>>> Hello,
>>> I do also have similar device and am facing a strange problem with it.
>>> After booting up the machine I am unable to connect to certain wireless
>>> AP. That is an old Owislink WL5460 router set up in 2.4B+G mode with WPA
>>> encryption.
>>> After connecting to another AP e.g. non encrypted AP made up of my
>>> Android phone or even encrypted AP created on an iphone I can then
>>> connect to the problematic AP.
>>> I am on arch linux currently with kernel 3.9.6. The issue started
>>> happening as I have updated my kernel to 3.9.1. Previously everything
>>> has been working fine wor me.
>>>
>>> Here are some more details
>>>
>>> $ lsusb | grep Ather
>>> Bus 002 Device 005: ID 0cf3:9271 Atheros Communications, Inc. AR9271
>>> 802.11n
>>>
>>> $ iw dev wlp0s26u1u6 get power_save
>>> Power save: off
>>>
>>>
>>> $ dmesg | grep 00:4f:62:05:df:2d
>>> [ 23.237360] wlp0s26u1u6: authenticate with 00:4f:62:05:df:2d
>>> [ 23.331989] wlp0s26u1u6: send auth to 00:4f:62:05:df:2d (try 1/3)
>>> [ 26.376049] wlp0s26u1u6: send auth to 00:4f:62:05:df:2d (try 2/3)
>>> [ 28.335490] wlp0s26u1u6: deauthenticating from 00:4f:62:05:df:2d by
>>> local choice (reason=3)
>>> --- snip ---
>>> This is repeating over and over again until I connect to something else.
>>> And then the final successfull connection to this AP looks like...
>>> [ 252.381096] wlp0s26u1u6: authenticate with 00:4f:62:05:df:2d
>>> [ 252.520920] wlp0s26u1u6: send auth to 00:4f:62:05:df:2d (try 1/3)
>>> [ 252.524098] wlp0s26u1u6: associate with 00:4f:62:05:df:2d (try 1/3)
>>> [ 252.538293] wlp0s26u1u6: RX AssocResp from 00:4f:62:05:df:2d
>>> (capab=0x411 status=0 aid=3)
>>>
>>> $ dmesg | grep ath9k_htc
>>> [ 7.353707] usb 2-1.6: ath9k_htc: Firmware htc_9271.fw requested
>>> [ 7.353772] usbcore: registered new interface driver ath9k_htc
>>> [ 7.829552] usb 2-1.6: ath9k_htc: Transferred FW: htc_9271.fw, size:
>>> 51272
>>> [ 8.064565] ath9k_htc 2-1.6:1.0: ath9k_htc: HTC initialized with 33
>>> credits
>>> [ 8.255145] ath9k_htc 2-1.6:1.0: ath9k_htc: FW Version: 1.3
>>> [ 252.522905] ath9k_htc 2-1.6:1.0 wlp0s26u1u6: disabling HT as WMM/QoS
>>> is not supported by the AP
>>> [ 252.522908] ath9k_htc 2-1.6:1.0 wlp0s26u1u6: disabling VHT as WMM/QoS
>>> is not supported by the AP
>>>
>>> $ sudo iw dev wlp0s26u1u6 scan dump
>>> BSS 00:4f:62:05:df:2d(on wlp0s26u1u6) -- associated
>>> TSF: 254735798022 usec (2d, 22:45:35)
>>> freq: 2412
>>> beacon interval: 100 TUs
>>> capability: ESS Privacy ShortSlotTime (0x0411)
>>> signal: -61.00 dBm
>>> last seen: 103493 ms ago
>>> Information elements from Probe Response frame:
>>> SSID: predok
>>> Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
>>> DS Parameter set: channel 1
>>> ERP: <no flags>
>>> Extended supported rates: 24.0 36.0 48.0 54.0
>>> WPA: * Version: 1
>>> * Group cipher: TKIP
>>> * Pairwise ciphers: TKIP
>>> * Authentication suites: PSK
>>> RSN: * Version: 1
>>> * Group cipher: TKIP
>>> * Pairwise ciphers: CCMP
>>> * Authentication suites: PSK
>>> * Capabilities: (0x0000)
>>>
>>> $ sudo iw dev wlp0s26u1u6 scan dump
>>> [sudo] password for peto:
>>> BSS 00:4f:62:05:df:2d(on wlp0s26u1u6)
>>> TSF: 255417536590 usec (2d, 22:56:57)
>>> freq: 2412
>>> beacon interval: 100 TUs
>>> capability: ESS Privacy ShortSlotTime (0x0411)
>>> signal: -59.00 dBm
>>> last seen: 386 ms ago
>>> Information elements from Probe Response frame:
>>> SSID: predok
>>> Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
>>> DS Parameter set: channel 1
>>> ERP: <no flags>
>>> Extended supported rates: 24.0 36.0 48.0 54.0
>>> WPA: * Version: 1
>>> * Group cipher: TKIP
>>> * Pairwise ciphers: TKIP
>>> * Authentication suites: PSK
>>> RSN: * Version: 1
>>> * Group cipher: TKIP
>>> * Pairwise ciphers: CCMP
>>> * Authentication suites: PSK
>>> * Capabilities: (0x0000)
>>>
>>>
>>>
>>> Thanks and greetings
>>
>>
>
--
Regards,
Oleksij
next prev parent reply other threads:[~2013-06-18 20:40 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <mailman.1.1370167201.11487.ath9k-devel@lists.ath9k.org>
2013-06-02 16:39 ` [ath9k-devel] Tplink TL-WN822N drops out connections randomly on Arch Linux with Kernel 3.9.4 (Mark Lee) Mark E. Lee
2013-06-02 17:00 ` Oleksij Rempel
2013-06-18 18:20 ` Peter Vágner
2013-06-18 19:41 ` Oleksij Rempel
2013-06-18 19:52 ` Peter Vágner
2013-06-18 19:54 ` Mark E. Lee
2013-06-18 20:40 ` Oleksij Rempel [this message]
[not found] <mailman.1.1370340001.351.ath9k-devel@lists.ath9k.org>
2013-06-05 19:43 ` Mark E. Lee
2013-06-03 18:44 Mark E. Lee
2013-06-03 19:25 ` Adrian Chadd
-- strict thread matches above, loose matches on Subject: below --
2013-06-01 17:00 Mark E. Lee
2013-06-01 17:22 ` Oleksij Rempel
2013-06-01 16:55 Mark E. Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C0C5A3.30301@rempel-privat.de \
--to=linux@rempel-privat.de \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.