From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Greear Date: Wed, 19 Jun 2013 15:58:51 -0700 Subject: [ath9k-devel] Is there a way to connect pairs of wifi cards to achieve full duplex In-Reply-To: References: <201306191750.08386.david.goodenough@linkchoose.co.uk> <51C22C0F.6060301@candelatech.com> Message-ID: <51C237AB.30305@candelatech.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org On 06/19/2013 03:56 PM, Adrian Chadd wrote: > .. just keep in mind that adjacent high power transmitters can > actually leak enough RF to trigger ADC saturation and thus the device > may actually not try to decode anything. > > Thus, whilst your TX is TXing, the RX side may be unhappy. :-) We've had decent multi-NIC throughput when there is a mostly-solid aluminium chassis plate between the NICs, and when one is on 2.4 and the other is on 5Ghz. Pretty much anything else is pushing your luck though :) Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com