EM28xx - MSI Digivox Trio - almost working.

["P. van Gaans" <w3ird_n3rd@gmx.net>]

Hi all,

(device: http://linuxtv.org/wiki/index.php/MSI_DigiVox_Trio)

Thanks to the message from Philip Pemberton I was able to try loading 
the em28xx driver myself using:

sudo modprobe em28xx card=NUMBER
echo eb1a 2885 | sudo tee /sys/bus/usb/drivers/em28xx/new_id

Here are the results for NUMBER:

Card=79 (Terratec Cinergy H5): works, less corruption than card=87, just 
some blocks every few seconds. Attenuators didn't help.
Card=81 (Hauppauge WinTV HVR 930C): doesn't work, no /dev/dvb adapter
Card=82 (Terratec Cinergy HTC Stick): similar to card=87
Card=85 (PCTV QuatroStick (510e)): constantly producing i2c read errors, 
doesn't work
Card=86 (PCTV QuatroStick nano (520e): same
Card=87 (Terratec Cinergy HTC USB XS): stick works and scans channels, 
but reception is bugged with corruption. It's like having a DVB-T 
antenna that's just not good enough, except this is DVB-C and my signal 
is excellent. Attenuators didn't help.
Card=88 (C3 Tech Digital Duo HDTV/SDTV USB): doesn't work, no /dev/dvb 
adapter

So with card=79 it's really close to working. What else can I do?

Best regareds,

P. van Gaans