From: "Michael L. Semon" <mlsemon35@gmail.com>
To: Dave Chinner <david@fromorbit.com>
Cc: xfs@oss.sgi.com
Subject: Re: [PATCH 59/60] xfs: Add xfs_log_rlimit.c
Date: Fri, 21 Jun 2013 02:10:50 -0400 [thread overview]
Message-ID: <51C3EE6A.5030909@gmail.com> (raw)
In-Reply-To: <1371617468-32559-60-git-send-email-david@fromorbit.com>
I'm still looking for Jeff's input on this particular patch. However, I
did want to report success on xfs/297. The Pentium 4 test PC was left to
rest for a few hours, then it was started again. The latest xfsprogs
patchset was applied to xfsprogs.
512b blocks, internal logdev, no CRC, projid32bit=1, tracers on: PASS
512b blocks, internal logdev, no CRC, projid32bit=0, tracers on: PASS
512b blocks, internal logdev, no CRC, projid32bit=0, tracers off: PASS
1k blocks, internal logdev, no CRC, tracers off: PASS
...rebooted to avoid RT throttling slowing things down...
1k blocks, internal logdev, CRC, tracers off: PASS
2k blocks, internal logdev, CRC, tracers off: PASS
2k blocks, external logdev, CRC, rtdev, tracers off: PASS
4k blocks, default mkfs.xfs: PASS
Something was fixed between the new xfsprogs and the PC's chance to reset
100%. What? I really don't know! But there is success.
Great job, Dave and Jeff!
Michael
On 06/19/2013 12:51 AM, Dave Chinner wrote:
> From: Jie Liu <jeff.liu@oracle.com>
>
> Add source files for xfs_log_rlimit.c The new file is used for log
> size calculations and validation shared with userspace.
>
> [dchinner: xfs_log_calc_max_attrsetm_res() does not modify the
> tr_attrsetm reservation, just calculates the maximum. ]
>
> [dchinner: rework loop in xfs_log_get_max_trans_res() ]
>
> Signed-off-by: Jie Liu <jeff.liu@oracle.com>
> Signed-off-by: Dave Chinner <dchinner@redhat.com>
> ---
> fs/xfs/Makefile | 1 +
> fs/xfs/xfs_log_format.h | 8 ++-
> fs/xfs/xfs_log_rlimit.c | 145 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 153 insertions(+), 1 deletion(-)
> create mode 100644 fs/xfs/xfs_log_rlimit.c
>
> diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile
> index c5c38a9..22691eb 100644
> --- a/fs/xfs/Makefile
> +++ b/fs/xfs/Makefile
> @@ -81,6 +81,7 @@ xfs-y += xfs_alloc.o \
> xfs_inode_fork.o \
> xfs_inode_buf.o \
> xfs_log_recover.o \
> + xfs_log_rlimit.o \
> xfs_sb.o \
> xfs_symlink_remote.o \
> xfs_trans_resv.o
> diff --git a/fs/xfs/xfs_log_format.h b/fs/xfs/xfs_log_format.h
> index 37a7ff9..8f46b6a 100644
> --- a/fs/xfs/xfs_log_format.h
> +++ b/fs/xfs/xfs_log_format.h
> @@ -1,5 +1,6 @@
> /*
> * Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
> + * Copyright (c) 2013 Jie Liu.
> * All Rights Reserved.
> *
> * This program is free software; you can redistribute it and/or
> @@ -19,6 +20,7 @@
> #define __XFS_LOG_FORMAT_H__
>
> struct xfs_mount;
> +struct xfs_trans_res;
>
> typedef __uint32_t xlog_tid_t;
>
> @@ -41,6 +43,9 @@ typedef __uint32_t xlog_tid_t;
>
> #define XLOG_HEADER_SIZE 512
>
> +/* Minimum number of transactions that must fit in the log (defined by mkfs) */
> +#define XFS_MIN_LOG_FACTOR 3
> +
> #define XLOG_REC_SHIFT(log) \
> BTOBB(1 << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \
> XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT))
> @@ -125,7 +130,6 @@ typedef struct xlog_op_header {
> __u16 oh_res2; /* 32 bit align : 2 b */
> } xlog_op_header_t;
>
> -
> /* valid values for h_fmt */
> #define XLOG_FMT_UNKNOWN 0
> #define XLOG_FMT_LINUX_LE 1
> @@ -178,5 +182,7 @@ typedef struct xfs_log_iovec {
> } xfs_log_iovec_t;
>
> int xfs_log_calc_unit_res(struct xfs_mount *mp, int unit_bytes);
> +int xfs_log_calc_minimum_size(struct xfs_mount *);
> +
>
> #endif /* __XFS_LOG_FORMAT_H__ */
> diff --git a/fs/xfs/xfs_log_rlimit.c b/fs/xfs/xfs_log_rlimit.c
> new file mode 100644
> index 0000000..e3f4b4e
> --- /dev/null
> +++ b/fs/xfs/xfs_log_rlimit.c
> @@ -0,0 +1,145 @@
> +/*
> + * Copyright (c) 2013 Jie Liu.
> + * All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it would be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write the Free Software Foundation,
> + * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +#include "xfs.h"
> +#include "xfs_fs.h"
> +#include "xfs_log.h"
> +#include "xfs_trans.h"
> +#include "xfs_ag.h"
> +#include "xfs_sb.h"
> +#include "xfs_mount.h"
> +#include "xfs_trans_space.h"
> +#include "xfs_bmap_btree.h"
> +#include "xfs_inode.h"
> +#include "xfs_da_btree.h"
> +#include "xfs_attr_leaf.h"
> +
> +/*
> + * Calculate the maximum length in bytes that would be required for a local
> + * attribute value as large attributes out of line are not logged.
> + */
> +STATIC int
> +xfs_log_calc_max_attrsetm_res(
> + struct xfs_mount *mp)
> +{
> + int size;
> + int nblks;
> +
> + size = xfs_attr_leaf_entsize_local_max(mp->m_sb.sb_blocksize) -
> + MAXNAMELEN - 1;
> + nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
> + nblks += XFS_B_TO_FSB(mp, size);
> + nblks += XFS_NEXTENTADD_SPACE_RES(mp, size, XFS_ATTR_FORK);
> +
> + return M_RES(mp)->tr_attrsetm.tr_logres +
> + M_RES(mp)->tr_attrsetrt.tr_logres * nblks;
> +}
> +
> +/*
> + * Iterate over the log space reservation table to figure out and return
> + * the maximum one in terms of the pre-calculated values which were done
> + * at mount time.
> + */
> +STATIC void
> +xfs_log_get_max_trans_res(
> + struct xfs_mount *mp,
> + struct xfs_trans_res *max_resp)
> +{
> + struct xfs_trans_res *resp;
> + struct xfs_trans_res *end_resp;
> + int log_space = 0;
> + int attr_space;
> +
> + attr_space = xfs_log_calc_max_attrsetm_res(mp);
> +
> + resp = (struct xfs_trans_res *)M_RES(mp);
> + end_resp = (struct xfs_trans_res *)(M_RES(mp) + 1);
> + for (; resp < end_resp; resp++) {
> + int tmp = resp->tr_logcount > 1 ?
> + resp->tr_logres * resp->tr_logcount :
> + resp->tr_logres;
> + if (log_space < tmp) {
> + log_space = tmp;
> + *max_resp = *resp; /* struct copy */
> + }
> + }
> +
> + if (attr_space > log_space) {
> + *max_resp = M_RES(mp)->tr_attrsetm; /* struct copy */
> + max_resp->tr_logres = attr_space;
> + }
> +}
> +
> +/*
> + * Calculate the minimum valid log size for the given superblock configuration.
> + * Used to calculate the minimum log size at mkfs time, and to determine if
> + * the log is large enough or not at mount time. Returns the minimum size in
> + * filesystem block size units.
> + */
> +int
> +xfs_log_calc_minimum_size(
> + struct xfs_mount *mp)
> +{
> + struct xfs_trans_res tres = {0};
> + int max_logres;
> + int min_logblks = 0;
> + int lsunit = 0;
> +
> + xfs_log_get_max_trans_res(mp, &tres);
> +
> + max_logres = xfs_log_calc_unit_res(mp, tres.tr_logres);
> + if (tres.tr_logcount > 1)
> + max_logres *= tres.tr_logcount;
> +
> + if (xfs_sb_version_haslogv2(&mp->m_sb) && mp->m_sb.sb_logsunit > 1)
> + lsunit = BTOBB(mp->m_sb.sb_logsunit);
> +
> + /*
> + * Two factors should be taken into account for calculating the minimum
> + * log space.
> + * 1) The fundamental limitation is that no single transaction can be
> + * larger than half size of the log.
> + *
> + * From mkfs.xfs, this is considered by the XFS_MIN_LOG_FACTOR
> + * define, which is set to 3. That means we can definitely fit
> + * maximally sized 2 transactions in the log. We'll use this same
> + * value here.
> + *
> + * 2) If the lsunit option is specified, a transaction requires 2 LSU
> + * for the reservation because there are two log writes that can
> + * require padding - the transaction data and the commit record which
> + * are written separately and both can require padding to the LSU.
> + * Consider that we can have an active CIL reservation holding 2*LSU,
> + * but the CIL is not over a push threshold, in this case, if we
> + * don't have enough log space for at one new transaction, which
> + * includes another 2*LSU in the reservation, we will run into dead
> + * loop situation in log space grant procedure. i.e.
> + * xlog_grant_head_wait().
> + *
> + * Hence the log size needs to be able to contain two maximally sized
> + * and padded transactions, which is (2 * (2 * LSU + maxlres)).
> + *
> + * Also, the log size should be a multiple of the log stripe unit, round
> + * it up to lsunit boundary if lsunit is specified.
> + */
> + if (lsunit)
> + min_logblks = roundup(BTOBB(max_logres), lsunit) + 2 * lsunit;
> + else
> + min_logblks = BTOBB(max_logres);
> + min_logblks *= XFS_MIN_LOG_FACTOR;
> + return XFS_BB_TO_FSB(mp, min_logblks);
> +}
>
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-06-21 6:11 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-19 4:50 [PATCH 00/60] xfs: patch queue for 3.11 Dave Chinner
2013-06-19 4:50 ` [PATCH 01/60] xfs: update mount options documentation Dave Chinner
2013-06-20 15:35 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 02/60] xfs: add pluging for bulkstat readahead Dave Chinner
2013-06-20 16:59 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 03/60] xfs: plug directory buffer readahead Dave Chinner
2013-06-20 18:45 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 04/60] xfs: don't use speculative prealloc for small files Dave Chinner
2013-06-19 12:59 ` Brian Foster
2013-06-20 19:31 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 05/60] xfs: don't do IO when creating an new inode Dave Chinner
2013-06-21 13:57 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 06/60] xfs: xfs_ifree doesn't need to modify the inode buffer Dave Chinner
2013-06-21 21:24 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 07/60] xfs: Introduce ordered log vector support Dave Chinner
2013-06-22 17:26 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 08/60] xfs: Introduce an ordered buffer item Dave Chinner
2013-06-23 17:27 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 09/60] xfs: Inode create log items Dave Chinner
2013-06-22 15:49 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 10/60] xfs: Inode create transaction reservations Dave Chinner
2013-06-23 17:29 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 11/60] xfs: Inode create item recovery Dave Chinner
2013-06-24 14:37 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 12/60] xfs: Use inode create transaction Dave Chinner
2013-06-24 18:55 ` Mark Tinguely
2013-06-19 4:50 ` [PATCH 13/60] xfs: remove local fork format handling from xfs_bmapi_write() Dave Chinner
2013-06-19 4:50 ` [PATCH 14/60] xfs: move getdents code into it's own file Dave Chinner
2013-06-19 4:50 ` [PATCH 15/60] xfs: reshuffle dir2 definitions around for userspace Dave Chinner
2013-06-19 4:50 ` [PATCH 16/60] xfs: split out attribute listing code into separate file Dave Chinner
2013-06-19 4:50 ` [PATCH 17/60] xfs: split out attribute fork truncation " Dave Chinner
2013-06-19 4:50 ` [PATCH 18/60] xfs: split out xfs inode operations " Dave Chinner
2013-06-19 4:50 ` [PATCH 19/60] xfs: consolidate xfs_vnodeops.c into xfs_inode_ops.c Dave Chinner
2013-06-19 4:50 ` [PATCH 20/60] xfs: move xfs_getbmap to xfs_extent_ops.c Dave Chinner
2013-06-19 4:50 ` [PATCH 21/60] xfs: introduce xfs_sb.c for sharing with libxfs Dave Chinner
2013-06-19 4:50 ` [PATCH 22/60] xfs: move xfs_trans_reservations to xfs_trans.h Dave Chinner
2013-06-19 4:50 ` [PATCH 23/60] xfs: sync minor header differences needed by userspace Dave Chinner
2013-06-19 4:50 ` [PATCH 24/60] xfs: move xfs_bmap_punch_delalloc() to xfs_aops.c Dave Chinner
2013-06-19 4:50 ` [PATCH 25/60] xfs: split out transaction reservation code Dave Chinner
2013-06-19 4:50 ` [PATCH 26/60] xfs: minor cleanups Dave Chinner
2013-06-19 4:50 ` [PATCH 27/60] xfs: fix issues that cause userspace warnings Dave Chinner
2013-06-19 4:50 ` [PATCH 28/60] xfs: consolidate xfs_rename.c Dave Chinner
2013-06-19 4:50 ` [PATCH 29/60] xfs: consolidate xfs_utils.c Dave Chinner
2013-06-19 9:40 ` Christoph Hellwig
2013-06-19 4:50 ` [PATCH 30/60] xfs: split out inode log item format definition Dave Chinner
2013-06-19 4:50 ` [PATCH 31/60] xfs: split out buf log item format definitions Dave Chinner
2013-06-19 4:50 ` [PATCH 32/60] xfs: move inode fork definitions to a new header file Dave Chinner
2013-06-19 4:50 ` [PATCH 33/60] xfs: move unrealted definitions out of xfs_inode.h Dave Chinner
2013-06-19 4:50 ` [PATCH 34/60] xfs: introduce xfs_inode_buf.c for inode buffer operations Dave Chinner
2013-06-19 4:50 ` [PATCH 35/60] xfs: start repopulating xfs_inode.[ch] with kernel code Dave Chinner
2013-06-19 4:50 ` [PATCH 36/60] xfs: move swap extent code to xfs_extent_ops Dave Chinner
2013-06-19 4:50 ` [PATCH 37/60] xfs: split out inode log item format definition Dave Chinner
2013-06-19 4:50 ` [PATCH 38/60] xfs: separate dquot on disk format definitions out of xfs_quota.h Dave Chinner
2013-06-19 4:50 ` [PATCH 39/60] xfs: separate icreate log format definitions from xfs_icreate_item.h Dave Chinner
2013-06-19 4:50 ` [PATCH 40/60] xfs: don't special case shared superblock mounts Dave Chinner
2013-06-19 4:50 ` [PATCH 41/60] xfs: kill __KERNEL__ check for debug code in allocation code Dave Chinner
2013-06-19 4:50 ` [PATCH 42/60] xfs: split out on-disk transaction definitions Dave Chinner
2013-06-19 4:50 ` [PATCH 43/60] xfs: remove __KERNEL__ from debug code Dave Chinner
2013-06-19 4:50 ` [PATCH 44/60] xfs: remove __KERNEL__ check from xfs_dir2_leaf.c Dave Chinner
2013-06-19 4:50 ` [PATCH 45/60] xfs: xfs_filestreams.h doesn't need __KERNEL__ Dave Chinner
2013-06-19 4:50 ` [PATCH 46/60] xfs: split out the remote symlink handling Dave Chinner
2013-06-19 4:50 ` [PATCH 47/60] xfs: separate out log format definitions Dave Chinner
2013-06-19 4:50 ` [PATCH 48/60] xfs: move kernel specific type definitions to xfs.h Dave Chinner
2013-06-19 4:50 ` [PATCH 49/60] xfs: make struct xfs_perag kernel only Dave Chinner
2013-06-19 4:50 ` [PATCH 50/60] xfs: create xfs_bmap_util.[ch] Dave Chinner
2013-06-19 4:50 ` [PATCH 51/60] xfs: introduce xfs_quota_defs.h Dave Chinner
2013-06-19 4:51 ` [PATCH 52/60] xfs: introduce xfs_rtalloc_defs.h Dave Chinner
2013-06-19 4:51 ` [PATCH 53/60] xfs: Introduce a new structure to hold transaction reservation items Dave Chinner
2013-06-19 4:51 ` [PATCH 54/60] xfs: Introduce tr_fsyncts to m_reservation Dave Chinner
2013-06-19 4:51 ` [PATCH 55/60] xfs: Make writeid transaction use tr_writeid Dave Chinner
2013-06-19 4:51 ` [PATCH 56/60] xfs: refactor xfs_trans_reserve() interface Dave Chinner
2013-06-19 4:51 ` [PATCH 57/60] xfs: Get rid of all XFS_XXX_LOG_RES() macro Dave Chinner
2013-06-19 4:51 ` [PATCH 58/60] xfs: Refactor xfs_ticket_alloc() to extract a new helper Dave Chinner
2013-06-19 4:51 ` [PATCH 59/60] xfs: Add xfs_log_rlimit.c Dave Chinner
2013-06-20 17:24 ` Michael L. Semon
2013-06-21 6:10 ` Michael L. Semon [this message]
2013-06-24 21:26 ` Mark Tinguely
2013-06-24 22:27 ` Dave Chinner
2013-06-25 14:06 ` Mark Tinguely
2013-06-26 4:05 ` Dave Chinner
2013-06-26 13:48 ` Mark Tinguely
2013-06-26 22:18 ` Dave Chinner
2013-06-19 4:51 ` [PATCH 60/60] xfs: Validate log space at mount time Dave Chinner
2013-06-19 9:15 ` [PATCH 00/60] xfs: patch queue for 3.11 Christoph Hellwig
2013-06-19 21:34 ` Dave Chinner
2013-06-20 9:17 ` Christoph Hellwig
2013-06-19 14:35 ` Ben Myers
2013-06-19 14:44 ` Christoph Hellwig
2013-06-19 14:54 ` Ric Wheeler
2013-06-19 15:47 ` Ben Myers
2013-06-19 23:33 ` Dave Chinner
2013-06-20 19:14 ` Ben Myers
2013-06-20 19:31 ` Chandra Seetharaman
2013-06-19 22:54 ` Dave Chinner
2013-06-20 4:51 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C3EE6A.5030909@gmail.com \
--to=mlsemon35@gmail.com \
--cc=david@fromorbit.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.