From: Jagan Teki <jagannadh.teki@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 1/4] sf: Unify spi_flash write code
Date: Sun, 23 Jun 2013 23:35:05 +0530 [thread overview]
Message-ID: <51C738D1.1030202@gmail.com> (raw)
In-Reply-To: <93bba7fa-fbd4-445f-803e-fcbfaba77157@CO9EHSMHS026.ehs.local>
On 21-06-2013 19:19, Jagannadha Sutradharudu Teki wrote:
> Move common flash write code into spi_flash_write_common().
>
> Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
> Acked-by: Simon Glass <sjg@chromium.org>
> ---
> Changes for v3:
> - Used proper comments on spi_flash_write_common
> Changes for v2:
> -
>
> drivers/mtd/spi/spi_flash.c | 120 ++++++++++++++++-------------------
> drivers/mtd/spi/spi_flash_internal.h | 10 +++
> 2 files changed, 63 insertions(+), 67 deletions(-)
>
> diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
> index 6ce82c1..03cecef 100644
> --- a/drivers/mtd/spi/spi_flash.c
> +++ b/drivers/mtd/spi/spi_flash.c
> @@ -68,15 +68,15 @@ int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
> return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len);
> }
>
> -int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
> - size_t len, const void *buf)
> +int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
> + size_t cmd_len, const void *buf, size_t buf_len)
> {
> - unsigned long byte_addr, page_size;
> - size_t chunk_len, actual;
> + struct spi_slave *spi = flash->spi;
> + unsigned long timeout = SPI_FLASH_PROG_TIMEOUT;
> int ret;
> - u8 cmd[4];
>
> - page_size = flash->page_size;
> + if (buf == NULL)
> + timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
>
> ret = spi_claim_bus(flash->spi);
> if (ret) {
> @@ -84,6 +84,41 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
> return ret;
> }
>
> + ret = spi_flash_cmd_write_enable(flash);
> + if (ret < 0) {
> + debug("SF: enabling write failed\n");
> + return ret;
> + }
> +
> + ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len);
> + if (ret < 0) {
> + debug("SF: write cmd failed\n");
> + return ret;
> + }
> +
> + ret = spi_flash_cmd_wait_ready(flash, timeout);
> + if (ret < 0) {
> + debug("SF: write %s timed out\n",
> + timeout == SPI_FLASH_PROG_TIMEOUT ?
> + "program" : "page erase");
> + return ret;
> + }
> +
> + spi_release_bus(spi);
> +
> + return ret;
> +}
> +
> +int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
> + size_t len, const void *buf)
> +{
> + unsigned long byte_addr, page_size;
> + size_t chunk_len, actual;
> + u8 cmd[4];
> + int ret = -1;
> +
> + page_size = flash->page_size;
> +
> cmd[0] = CMD_PAGE_PROGRAM;
> for (actual = 0; actual < len; actual += chunk_len) {
> #ifdef CONFIG_SPI_FLASH_BAR
> @@ -108,27 +143,16 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
> debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
> buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
>
> - ret = spi_flash_cmd_write_enable(flash);
> - if (ret < 0) {
> - debug("SF: enabling write failed\n");
> - break;
> - }
> -
> - ret = spi_flash_cmd_write(flash->spi, cmd, 4,
> - buf + actual, chunk_len);
> + ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
> + buf + actual, chunk_len);
> if (ret < 0) {
> debug("SF: write failed\n");
> break;
> }
>
> - ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
> - if (ret)
> - break;
> -
> offset += chunk_len;
> }
>
> - spi_release_bus(flash->spi);
> return ret;
> }
>
> @@ -242,8 +266,8 @@ int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
> int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
> {
> u32 erase_size;
> - int ret;
> u8 cmd[4];
> + int ret = -1;
>
> erase_size = flash->sector_size;
> if (offset % erase_size || len % erase_size) {
> @@ -251,12 +275,6 @@ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
> return -1;
> }
>
> - ret = spi_claim_bus(flash->spi);
> - if (ret) {
> - debug("SF: Unable to claim SPI bus\n");
> - return ret;
> - }
> -
> if (erase_size == 4096)
> cmd[0] = CMD_ERASE_4K;
> else
> @@ -279,24 +297,16 @@ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
> debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
> cmd[2], cmd[3], offset);
>
> - ret = spi_flash_cmd_write_enable(flash);
> - if (ret)
> - goto out;
> -
> - ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), NULL, 0);
> - if (ret)
> - goto out;
> -
> - ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
> - if (ret)
> - goto out;
> + ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
> + if (ret < 0) {
> + debug("SF: erase failed\n");
> + break;
> + }
>
> offset += erase_size;
> len -= erase_size;
> }
>
> - out:
> - spi_release_bus(flash->spi);
> return ret;
> }
>
> @@ -305,22 +315,10 @@ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
> u8 cmd;
> int ret;
>
> - ret = spi_flash_cmd_write_enable(flash);
> - if (ret < 0) {
> - debug("SF: enabling write failed\n");
> - return ret;
> - }
> -
> cmd = CMD_WRITE_STATUS;
> - ret = spi_flash_cmd_write(flash->spi, &cmd, 1, &sr, 1);
> - if (ret) {
> - debug("SF: fail to write status register\n");
> - return ret;
> - }
> -
> - ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
> + ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1);
> if (ret < 0) {
> - debug("SF: write status register timed out\n");
> + debug("SF: fail to write status register\n");
> return ret;
> }
>
> @@ -339,25 +337,13 @@ int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
> }
>
> cmd = flash->bank_write_cmd;
> - ret = spi_flash_cmd_write_enable(flash);
> + ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
> if (ret < 0) {
> - debug("SF: enabling write failed\n");
> - return ret;
> - }
> -
> - ret = spi_flash_cmd_write(flash->spi, &cmd, 1, &bank_sel, 1);
> - if (ret) {
> - debug("SF: fail to write bank addr register\n");
> + debug("SF: fail to write bank register\n");
> return ret;
> }
> flash->bank_curr = bank_sel;
>
> - ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
> - if (ret < 0) {
> - debug("SF: write bank addr register timed out\n");
> - return ret;
> - }
> -
> return 0;
> }
>
> diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
> index 8147f27..be3c768 100644
> --- a/drivers/mtd/spi/spi_flash_internal.h
> +++ b/drivers/mtd/spi/spi_flash_internal.h
> @@ -108,6 +108,16 @@ int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0);
> */
> int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
> size_t cmd_len, void *data, size_t data_len);
> +/*
> + * Used for spi_flash write operation
> + * - SPI claim
> + * - spi_flash_cmd_write_enable
> + * - spi_flash_cmd_write
> + * - spi_flash_cmd_wait_ready
> + * - SPI release
> + */
> +int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
> + size_t cmd_len, const void *buf, size_t buf_len);
>
> /*
> * Send the read status command to the device and wait for the wip
>
Applied to u-boot-spi/master
--
Thanks,
Jagan.
prev parent reply other threads:[~2013-06-23 18:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-21 13:49 [U-Boot] [PATCH v3 1/4] sf: Unify spi_flash write code Jagannadha Sutradharudu Teki
2013-06-23 18:05 ` Jagan Teki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C738D1.1030202@gmail.com \
--to=jagannadh.teki@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.