[U-Boot] [PATCH v5 8/8] Boards: Add support for SolidRun CuBox

[Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>]

On 06/25/2013 11:27 PM, Sascha Silbe wrote:
> With latest support for Marvell Dove SoC, add the SolidRun CuBox as
> the very first board with that SoC.
>
> Three variants are provided:
>
> 1. A regular SPI boot image for CuBox (1GiB)
>
>     The CuBox (without "Pro") has 1GiB of memory.
>
> 2. A regular SPI boot image for CuBox Pro (2GiB)
>
>     The CuBox Pro has 2GiB of memory. Because larger SDRAM chips are
>     used, tRFC needs to be longer than on the 1GiB variant.
>
> 3. A UART boot image for both CuBox and CuBox Pro
>
>     This is just for recovery purposes, so the smaller memory map (on
>     CuBox Pro) and slower SDRAM access (on CuBox) doesn't
>     matter. Having a single image that works on both hardware variants
>     is quite convenient during recovery.
>
> Signed-off-by: Sascha Silbe<t-uboot@infra-silbe.de>
> ---
[...]
> diff --git a/boards.cfg b/boards.cfg
> index c0c4282..3605d3a 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -331,6 +331,9 @@ dalmore                      arm         armv7:arm720t dalmore           nvidia
>   colibri_t20_iris             arm         armv7:arm720t colibri_t20_iris  toradex        tegra20
>   u8500_href                   arm         armv7       u8500               st-ericsson    u8500
>   snowball                     arm         armv7       snowball               st-ericsson    u8500
> +cubox                        arm         armv7       cubox               solidrun       dove        cubox:CUBOX_1GB
> +cubox_pro                    arm         armv7       cubox               solidrun       dove        cubox:CUBOX_2GB
> +cubox_uart                   arm         armv7       cubox               solidrun       dove        cubox:CUBOX_UART_BOOT

How about CUBOX_SPI_1GB, CUBOX_SPI_2GB, CUBOX_UART ?
Also, sort order in boards.cfg should be
ARCH (arm), CPU (armv7), SoC (dove), Vendor (solidrun), Target

>   kzm9g                        arm         armv7       kzm9g               kmc            rmobile
>   armadillo-800eva             arm         armv7       armadillo-800eva    atmark-techno  rmobile
>   zynq                         arm         armv7       zynq                xilinx         zynq
> diff --git a/include/configs/cubox.h b/include/configs/cubox.h
> new file mode 100644
> index 0000000..7d5845c
> --- /dev/null
> +++ b/include/configs/cubox.h
> @@ -0,0 +1,185 @@
> +/*
> + * SolidRun CuBox config
> + *
> + * Sebastian Hesselbarth<sebastian.hesselbarth@gmail.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +
> +#ifndef _CONFIG_CUBOX_H
> +#define _CONFIG_CUBOX_H
> +#include<asm/sizes.h>
> +
> +/*
> + * Version number information
> + */
> +#define CONFIG_IDENT_STRING	"SolidRun CuBox"
> +
> +#undef CONFIG_SYS_KWD_CONFIG
> +#if defined(CONFIG_CUBOX_UART_BOOT)
> +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-uart.cfg
> +#elif defined(CONFIG_CUBOX_1GB)
> +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-spi-1gb.cfg
> +#elif defined(CONFIG_CUBOX_2GB)
> +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-spi-2gb.cfg
> +#endif

ditto wrt to CONFIG_CUBOX_*

Sebastian