Re: [PATCH net v1 1/1] net: fec: Fix Transmitted bytes counter

[Jim Baxter <jim_baxter@mentor.com>]

On 01/07/13 21:40, David Miller wrote:
> From: Duan Fugang-B38611 <B38611@freescale.com>
> Date: Fri, 28 Jun 2013 02:11:30 +0000
> 
>> On 06/28/13 02:25, Jim Baxter wrote:
>>
>>> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
>>> index ed6180e..05a5f76 100644
>>> --- a/drivers/net/ethernet/freescale/fec_main.c
>>> +++ b/drivers/net/ethernet/freescale/fec_main.c
>>> @@ -738,6 +738,7 @@ fec_enet_tx(struct net_device *ndev)
>>>  				ndev->stats.tx_carrier_errors++;
>>>  		} else {
>>>  			ndev->stats.tx_packets++;
>>> +			ndev->stats.tx_bytes += bdp->cbd_datlen;
>>>  		}
>>>  
>>>  		if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) &&
>>> --
>> You cannot stat. tx_bytes in here, since stat.tx_bytes indicate that all bytes sent by MAC regardless whether there have error packets or not.
>> You must add the stat. at xmit function as below:
> 
> I completely disagree.
> 
> tx_bytes indicates what actually made it to the wires, so Jim's original
> patch is the correct one.
> 
> Every single driver I have ever written, always increments tx_bytes in
> the transmit completion handler, not when the device layer gives the
> packet to the driver.
> 

If this should be the first version of the patch, can I cancel the
second version and set the first version to new in patchwork, or is it
best to submit a third version?

Thank you,
Jim