From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Pattenden Date: Mon, 08 Jul 2013 14:15:42 +0000 Subject: [lm-sensors] Displaying Voltage as Temperature?!? Message-Id: <51DAC98E.3090203@aeryon.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Howdy. I have a thermistor connected to a voltage sensing port (in0_input) on my ADC chip. I have everything running (i.e, /etc/sensors.conf has the voltage->temperature conversion curve programmed into a 'convert' line and 'sensors' is displaying the correct temperature) but the temperature is being displayed as "+21.0 V". Obviously, I'd like to display "+21.0 C". Is there any way to force sensors to display the reading as a temperature without rewriting my ADC driver to fake a temperature sensing device (which it isn't)? Thanks, Chris _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors