Re: proper recipe to build for BBB using the meta-ti layer?

[Tom Rini <trini@ti.com>]

On 07/08/2013 04:50 PM, Robert P. J. Day wrote:
> On Mon, 8 Jul 2013, Tom Rini wrote:
> 
>> On 07/08/2013 03:38 PM, Robert P. J. Day wrote:
> ... snip ...
>>>   i had time to do the following quick test. i took my working uSD
>>> card (with artifacts from the meta-beagleboard build), and simply
>>> flat-out replaced both the MLO and u-boot.img files in the FAT
>>> partition with the corresponding files from the meta-ti build, and got
>>> the error above.
>>>
>>>   i then copied back the original MLO and u-boot.img files and the
>>> boot worked just fine, so that validates that the card partitioning
>>> itself seems fine.
>>>
>>>   i'll just email you the two files in question, and you can see if
>>> you can boot to u-boot.
>>
>> The files both boot for me, on Beaglebone Black and White.
> 
>   then i'm baffled ... what recipe do you use to format the uSD card?
> and did you try booting with nothing but those two files on the card?
> no uImage, no uEnv.txt, etc?

I'm just using a by-hand partitioned card.  Can you please dd off a copy
of your card (so we can reproduce later) and then just zero, and then
create an MBR partition table, with the first partition table type c and
with the bootable flag set, mkfs.vfat it and copy the files in?

-- 
Tom