diff for duplicates of <51E4BF98.8030604@wwwdotorg.org> diff --git a/a/1.txt b/N1/1.txt index 6c4ada4..2ecbba1 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -6,8 +6,8 @@ On 07/15/2013 07:50 PM, Shawn Guo wrote: >> connected to a reset pin of a peripheral IC. The delay between assertion >> and de-assertion of the reset signal can be configured via device tree. >> ->> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> ->> Reviewed-by: Stephen Warren <swarren@nvidia.com> +>> Signed-off-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> +>> Reviewed-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> > > I see this patch is very useful, as GPIOs are widely used to reset > components/devices on board. But I do not find the patch in v3.11-rc1. @@ -22,7 +22,7 @@ On 07/15/2013 07:50 PM, Shawn Guo wrote: > ---8<-------- > > From 2f8ce9e5d6525b98f3828b707458e83fabb39d50 Mon Sep 17 00:00:00 2001 -> From: Shawn Guo <shawn.guo@linaro.org> +> From: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > Date: Sun, 14 Jul 2013 20:41:00 +0800 > Subject: [PATCH] ENGR00269945: reset: register gpio-reset driver in > arch_initcall diff --git a/a/content_digest b/N1/content_digest index 4d5d036..95cc1ce 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,9 +1,20 @@ "ref\01369904940-716-1-git-send-email-p.zabel@pengutronix.de\0" "ref\020130716015038.GD28375@S2101-09.ap.freescale.net\0" - "From\0swarren@wwwdotorg.org (Stephen Warren)\0" - "Subject\0[PATCH v8] reset: Add driver for gpio-controlled reset pins\0" + "ref\020130716015038.GD28375-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org\0" + "From\0Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>\0" + "Subject\0Re: [PATCH v8] reset: Add driver for gpio-controlled reset pins\0" "Date\0Mon, 15 Jul 2013 21:35:52 -0600\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>\0" + "Cc\0Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>" + Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org> + Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org> + Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> + Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> + Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> + Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> + devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org + " linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org\0" "\00:1\0" "b\0" "On 07/15/2013 07:50 PM, Shawn Guo wrote:\n" @@ -14,8 +25,8 @@ ">> connected to a reset pin of a peripheral IC. The delay between assertion\n" ">> and de-assertion of the reset signal can be configured via device tree.\n" ">>\n" - ">> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>\n" - ">> Reviewed-by: Stephen Warren <swarren@nvidia.com>\n" + ">> Signed-off-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>\n" + ">> Reviewed-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\n" "> \n" "> I see this patch is very useful, as GPIOs are widely used to reset\n" "> components/devices on board. But I do not find the patch in v3.11-rc1.\n" @@ -30,7 +41,7 @@ "> ---8<--------\n" "> \n" "> From 2f8ce9e5d6525b98f3828b707458e83fabb39d50 Mon Sep 17 00:00:00 2001\n" - "> From: Shawn Guo <shawn.guo@linaro.org>\n" + "> From: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>\n" "> Date: Sun, 14 Jul 2013 20:41:00 +0800\n" "> Subject: [PATCH] ENGR00269945: reset: register gpio-reset driver in\n" "> arch_initcall\n" @@ -57,4 +68,4 @@ "\n" That should work fine with deferred probe. -d7f367d294631f8a3814e50537d512f6471bef0d6443189379055941ab8fa1d4 +66a65522928e2137c80b10b3cb1a4c4de33fecac1f610caaa184e0d7a5c21ce5
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.