All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peng Haitao <penght@cn.fujitsu.com>
To: Jan Stancek <jstancek@redhat.com>
Cc: alexey.kodanev@oracle.com, ltp-list@lists.sourceforge.net
Subject: Re: [LTP] [PATCH] testcases/kernel/firmware: fix a bug of make install
Date: Tue, 16 Jul 2013 17:33:35 +0800	[thread overview]
Message-ID: <51E5136F.5080103@cn.fujitsu.com> (raw)
In-Reply-To: <1752195557.979708.1373966382515.JavaMail.root@redhat.com>


On 07/16/2013 05:19 PM, Jan Stancek wrote:
> 
> how about this?
> 

It is very simple:)

> diff --git a/testcases/kernel/firmware/Makefile b/testcases/kernel/firmware/Makefile
> index fbacf8d..dd2c62d 100644
> --- a/testcases/kernel/firmware/Makefile
> +++ b/testcases/kernel/firmware/Makefile
> @@ -38,7 +38,7 @@ endif
>  
>  ifeq ($(SKIP),0)
>  SUBDIRS                        += fw_load_kernel
> -SUBDIRS                        += fw_load_user
>  endif
> +SUBDIRS                        += fw_load_user
> 
> We always build userspace part. The check for kernel version is
> already in setup(). We just need to make sure userspace bits compile everywhere.
> I tried 2.6.32 based kernel, it builds and runs:
> # ./fw_load_user/fw_load 
> fw_load     1  TCONF  :  Test must be run with kernel 3.7 or newer
> fw_load     2  TCONF  :  Remaining cases not appropriate for configuration
> 

Tested in RHEL5, the result is OK.
<<<test_output>>>
incrementing stop
fw_load     1  TCONF  :  Test must be run with kernel 3.7 or newer
fw_load     2  TCONF  :  Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>


Thanks.

-- 
Best Regards,
Peng

> Regards,
> Jan
> 
>>
>> diff --git a/include/mk/config.mk.default b/include/mk/config.mk.default
>> index 953747c..ca203cb 100644
>> --- a/include/mk/config.mk.default
>> +++ b/include/mk/config.mk.default
>> @@ -78,5 +78,6 @@ LINUX_DIR		:=
>>  LINUX_VERSION_MAJOR	:=
>>  LINUX_VERSION_PATCH	:=
>>  WITH_MODULES		:= no
>> +LINUX_VERSION_AFTER	:= no
>>  
>>  export datarootdir includedir libdir mandir prefix
>> diff --git a/include/mk/config.mk.in b/include/mk/config.mk.in
>> index 96633f1..24052ff 100644
>> --- a/include/mk/config.mk.in
>> +++ b/include/mk/config.mk.in
>> @@ -80,6 +80,7 @@ LINUX_DIR		:= @LINUX_DIR@
>>  LINUX_VERSION_MAJOR	:= @LINUX_VERSION_MAJOR@
>>  LINUX_VERSION_PATCH	:= @LINUX_VERSION_PATCH@
>>  WITH_MODULES		:= @WITH_MODULES@
>> +LINUX_VERSION_AFTER	:= @LINUX_VERSION_AFTER@
>>  
>>  ifeq ($(strip $(prefix)),)
>>  $(error you are using $$(prefix) incorrectly -- set it to $(abs_top_srcdir)
>>  if you want to build in the source tree)
>> diff --git a/m4/ltp-kernel_devel.m4 b/m4/ltp-kernel_devel.m4
>> index ba53bc1..febe603 100644
>> --- a/m4/ltp-kernel_devel.m4
>> +++ b/m4/ltp-kernel_devel.m4
>> @@ -25,6 +25,8 @@ dnl requires kernel-devel installed
>>  dnl
>>  
>>  AC_DEFUN([LTP_CHECK_KERNEL_DEVEL],[dnl
>> +AH_TEMPLATE(LINUX_VERSION_AFTER,
>> +[Define to yes if kernel version is after 3.7.])
>>  
>>  AC_MSG_CHECKING([for kernel-devel])
>>  AC_ARG_WITH(
>> @@ -73,4 +75,17 @@ AC_ARG_WITH(
>>  			[])
>>  
>>  AC_SUBST(WITH_MODULES)
>> +
>> +REQ_VERSION_MAJOR=3
>> +REQ_VERSION_PATCH=7
>> +if test "x$WITH_MODULES" = "xyes"; then
>> +	if test ${LINUX_VERSION_MAJOR} -ge ${REQ_VERSION_MAJOR}; then
>> +		if test ${LINUX_VERSION_PATCH} -ge ${REQ_VERSION_PATCH}; then
>> +			LINUX_VERSION_AFTER="yes"
>> +			AC_DEFINE(LINUX_VERSION_AFTER)
>> +		fi
>> +	fi
>> +fi
>> +
>> +AC_SUBST(LINUX_VERSION_AFTER)
>>  ])
>> diff --git a/testcases/kernel/firmware/Makefile
>> b/testcases/kernel/firmware/Makefile
>> index fbacf8d..03069b8 100644
>> --- a/testcases/kernel/firmware/Makefile
>> +++ b/testcases/kernel/firmware/Makefile
>> @@ -18,27 +18,4 @@ top_srcdir	?= ../../..
>>  
>>  include $(top_srcdir)/include/mk/env_pre.mk
>>  
>> -SUBDIRS			=
>> -REQ_VERSION_MAJOR	= 3
>> -REQ_VERSION_PATCH	= 7
>> -
>> -ifeq ($(MAKECMDGOALS),clean)
>> -SKIP = 0
>> -endif
>> -
>> -ifeq ($(WITH_MODULES),yes)
>> -SKIP ?= $(shell test $(LINUX_VERSION_MAJOR) -gt $(REQ_VERSION_MAJOR); echo
>> $$?)
>> -ifeq ($(SKIP),1)
>> -SKIP = $(shell test $(LINUX_VERSION_MAJOR) -eq $(REQ_VERSION_MAJOR); echo
>> $$?)
>> -ifeq ($(SKIP),0)
>> -SKIP = $(shell test $(LINUX_VERSION_PATCH) -ge $(REQ_VERSION_PATCH); echo
>> $$?)
>> -endif
>> -endif
>> -endif
>> -
>> -ifeq ($(SKIP),0)
>> -SUBDIRS			+= fw_load_kernel
>> -SUBDIRS			+= fw_load_user
>> -endif
>> -
>>  include $(top_srcdir)/include/mk/generic_trunk_target.mk
>> diff --git a/testcases/kernel/firmware/fw_load_kernel/Makefile
>> b/testcases/kernel/firmware/fw_load_kernel/Makefile
>> index 076d4ed..564501b 100644
>> --- a/testcases/kernel/firmware/fw_load_kernel/Makefile
>> +++ b/testcases/kernel/firmware/fw_load_kernel/Makefile
>> @@ -25,7 +25,11 @@ else
>>  top_srcdir	?= ../../../..
>>  include $(top_srcdir)/include/mk/env_pre.mk
>>  
>> -MAKE_TARGETS	:= ltp_fw_load.ko
>> +ifeq ($(LINUX_VERSION_AFTER),yes)
>> +	MAKE_TARGETS	:= ltp_fw_load.ko
>> +else
>> +	MAKE_TARGETS    :=
>> +endif
>>  
>>  # Ignoring the exit status of commands is done to be forward compatible with
>>  # kernel internal API changes. The user-space test will return TCONF, if it
>> diff --git a/testcases/kernel/firmware/fw_load_user/fw_load.c
>> b/testcases/kernel/firmware/fw_load_user/fw_load.c
>> index 880531e..69b6d81 100644
>> --- a/testcases/kernel/firmware/fw_load_user/fw_load.c
>> +++ b/testcases/kernel/firmware/fw_load_user/fw_load.c
>> @@ -28,6 +28,7 @@
>>  #include <unistd.h>
>>  #include <string.h>
>>  
>> +#include "config.h"
>>  #include "test.h"
>>  #include "usctest.h"
>>  #include "safe_macros.h"
>> @@ -84,11 +85,16 @@ static void create_firmware(char *const fw_paths[]);
>>  
>>  int main(int argc, char *argv[])
>>  {
>> +#ifdef LINUX_VERSION_AFTER
>>  	setup(argc, argv);
>>  
>>  	test_run();
>>  
>>  	cleanup();
>> +#else
>> +	tst_resm(TCONF, "This device firmware loading is not supported");
>> +	tst_resm(TCONF, "before kernel 3.7");
>> +#endif
>>  
>>  	tst_exit();
>>  }
>> --
>> 1.8.3.1
>>
>>
>> ------------------------------------------------------------------------------
>> See everything from the browser to the database with AppDynamics
>> Get end-to-end visibility with application monitoring from AppDynamics
>> Isolate bottlenecks and diagnose root cause in seconds.
>> Start your free trial of AppDynamics Pro today!
>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>> _______________________________________________
>> Ltp-list mailing list
>> Ltp-list@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/ltp-list
>>
> 


------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list

  reply	other threads:[~2013-07-16  9:34 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-16  8:31 [LTP] [PATCH] testcases/kernel/firmware: fix a bug of make install Peng Haitao
2013-07-16  9:19 ` Jan Stancek
2013-07-16  9:33   ` Peng Haitao [this message]
2013-07-16  9:55     ` alexey.kodanev
2013-07-16 11:12       ` Jan Stancek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51E5136F.5080103@cn.fujitsu.com \
    --to=penght@cn.fujitsu.com \
    --cc=alexey.kodanev@oracle.com \
    --cc=jstancek@redhat.com \
    --cc=ltp-list@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.