diff for duplicates of <51E56AF6.30506@wwwdotorg.org> diff --git a/a/1.txt b/N1/1.txt index d75b5ba..6fef4b7 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -7,8 +7,8 @@ On 07/16/2013 12:51 AM, Shawn Guo wrote: >>> connected to a reset pin of a peripheral IC. The delay between assertion >>> and de-assertion of the reset signal can be configured via device tree. >>> ->>> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> ->>> Reviewed-by: Stephen Warren <swarren@nvidia.com> +>>> Signed-off-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> +>>> Reviewed-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> >> >> I see this patch is very useful, as GPIOs are widely used to reset >> components/devices on board. But I do not find the patch in v3.11-rc1. diff --git a/a/content_digest b/N1/content_digest index c0c0a38..3c270f2 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,10 +1,21 @@ "ref\01369904940-716-1-git-send-email-p.zabel@pengutronix.de\0" "ref\020130716015038.GD28375@S2101-09.ap.freescale.net\0" "ref\020130716065130.GB30067@S2101-09.ap.freescale.net\0" - "From\0swarren@wwwdotorg.org (Stephen Warren)\0" - "Subject\0[PATCH v8] reset: Add driver for gpio-controlled reset pins\0" + "ref\020130716065130.GB30067-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org\0" + "From\0Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>\0" + "Subject\0Re: [PATCH v8] reset: Add driver for gpio-controlled reset pins\0" "Date\0Tue, 16 Jul 2013 09:47:02 -0600\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>\0" + "Cc\0Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>" + Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org> + Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org> + Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> + Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> + Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> + Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> + devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org + " linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org\0" "\00:1\0" "b\0" "On 07/16/2013 12:51 AM, Shawn Guo wrote:\n" @@ -16,8 +27,8 @@ ">>> connected to a reset pin of a peripheral IC. The delay between assertion\n" ">>> and de-assertion of the reset signal can be configured via device tree.\n" ">>>\n" - ">>> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>\n" - ">>> Reviewed-by: Stephen Warren <swarren@nvidia.com>\n" + ">>> Signed-off-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>\n" + ">>> Reviewed-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\n" ">>\n" ">> I see this patch is very useful, as GPIOs are widely used to reset\n" ">> components/devices on board. But I do not find the patch in v3.11-rc1.\n" @@ -43,4 +54,4 @@ "permissible to call gpio_set_value_cansleep() at this point in the code,\n" simply always call that, and remove the conditional logic. -b88a32088f25067891a37e571077d1c7e694fa266eb4b58db93021d0c55988fd +57c99f65a8aba7177435fc31d2ae060b6d7fb1cc58d13e047f25a341bbebc427
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.