From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <51E7AB87.4020403@aaton.com> Date: Thu, 18 Jul 2013 10:47:03 +0200 From: Nicolas Pinault MIME-Version: 1.0 References: <51E79279.9040102@aaton.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Subject: Re: [Xenomai] RE : i.MX6 setup Reply-To: nicolasp@aaton.com List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: "xenomai@xenomai.org" Hi Younes, Le 18/07/2013 09:52, Younes CHALABI a =E9crit : > Hi Nicolas, > > Do you use the L3.0.35_4.0.0 LTIB BSP for i.MX6 ? > > I am trying to do the same work, by deploying Xenomai on my i.MX6Q Sabr= e Lite board. > > Once you have your U-Boot and Kernel from LTIB you have to : > > - Download xenomai and take a look at : ksrc/arch/arm/patches/mxc/READM= E > > - Resume to the classic installation on : http://www.xenomai.org/docume= ntation/xenomai-2.6/html/README.INSTALL/#arm > > It has been a month that I am trying to deploy but I have not secceed y= et ! Thanks for your answer. I'll follow the links you provided me. I'll let you know if I succeed or not. Regards, Nicolas > > Regards, > Younes > ________________________________________ > De : xenomai-bounces@xenomai.org [xenomai-bounces@xenomai.org] de la pa= rt de Nicolas Pinault [nicolasp@aaton.com] > Date d'envoi : jeudi 18 juillet 2013 09:00 > =C0 : xenomai@xenomai.org > Objet : [Xenomai] i.MX6 setup > > Hi, > > I'm starting a new project where I have to use Linux on a i.MX6. The ne= w > system has real time constraints. I have chosen xenomai for the real > time part of the software. > I have followed Freescale documents to setup a Ubuntu virtual machine t= o > run ltib and cross-compile the Linux distribution delivered by > Freescale. I now have a i.MX6 board (Sabre Smart Devices Board) booting > U-Boot and running standard Freescale Linux. > What's next ? > I have read xenomai documentation but some points are not clear. > It is said that patches have to be applied on a vanilla kernel. I guess > the Freescale Linux distribution does not have a vanilla kernel. So how > can I apply patches on it ? > > Does anyone have a detailed "howto" to setup a xenomai patched Linux fo= r > a i.MX6 board ? > > Regards, > Nicolas > > PS : I guess that topic has already been discussed here but I have not > found any archive for the current mailing list. > > > _______________________________________________ > Xenomai mailing list > Xenomai@xenomai.org > http://www.xenomai.org/mailman/listinfo/xenomai