From: "Jörg Esser" <jackfritt@boh.de>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: "linux-bluetooth@vger.kernel.org" <linux-bluetooth@vger.kernel.org>
Subject: Re: 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something
Date: Fri, 19 Jul 2013 08:26:07 +0200 [thread overview]
Message-ID: <51E8DBFF.4060702@boh.de> (raw)
In-Reply-To: <36A79410-3FA3-408F-BA16-6A30568A7035@holtmann.org>
Marcel Holtmann schrieb:
> Hi Joerg,
>
>> don´t know if it is wrong to post under the same topic which is more than one year old.
>> Ref to it is here.
>> http://www.spinics.net/lists/linux-bluetooth/msg18763.html
>> There was never an answer to the latest question from Michael if there will be a solution.
>>
>> I also tried to get this to run with my latest kernel 3.10 under debian 7 without success.
>> Will there be a solution or should I open my real trashbin?(other sticks are working so far for me) :)
>>
>> Let me know if you need more info´s on that.
>>
>> Thx,
>> Joerg
>>
>> My syslog says:
>> Jul 18 15:11:10 debian-capi kernel: [ 64.808373] usb 1-3: new full-speed USB device number 5 using ohci_hcd
>> Jul 18 15:11:10 debian-capi kernel: [ 65.277828] usb 1-3: New USB device found, idVendor=057c, idProduct=3800
>> Jul 18 15:11:10 debian-capi kernel: [ 65.277834] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> Jul 18 15:11:10 debian-capi kernel: [ 65.277838] usb 1-3: Product: Bluetooth Device
>> Jul 18 15:11:10 debian-capi kernel: [ 65.277841] usb 1-3: Manufacturer: Bluetooth Device
>> Jul 18 15:11:10 debian-capi kernel: [ 65.277844] usb 1-3: SerialNumber: CC1C8D0E0400
>> Jul 18 15:11:10 debian-capi bluetoothd[2199]: HCI dev 0 registered
>> Jul 18 15:11:10 debian-capi bluetoothd[2199]: Listening for HCI events on hci0
>> Jul 18 15:11:11 debian-capi bluetoothd[2894]: Can't init device hci0: Invalid request code (56)
> any chance you can run btmon and see if we have failing HCI commands during the setup phase.
Sure! Here you are:
debian-capi:~# btmon
Bluetooth monitor ver 5.7
= New Index: 00:00:00:00:00:00 (BR/EDR,USB,hci0) [hci0] 0.025804
< HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 0.031045
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.037000
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported Feat.. (0x04|0x0003) plen 0 [hci0]
0.037209
> HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.040740
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0xff 0x05 0x00 0x18 0x18 0x00 0x00
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Hold mode
Sniff mode
Park state
Power control requests
Channel quality driven data rate (CQDDR)
SCO link
HV2 packets
HV3 packets
u-law log synchronous data
A-law log synchronous data
CVSD synchronous data
Power control
AFH capable slave
AFH classification slave
AFH capable master
AFH classification master
< HCI Command: Read Local Version Inform.. (0x04|0x0001) plen 0 [hci0]
0.041025
> HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: 2 - 0x2006
LMP version: 2 - 0x1806
Manufacturer: AVM Berlin (31)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci0] 0.044100
> HCI Event: Command Complete (0x0e) plen 10 [hci0] 0.046722
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:04:0E:8D:1C:CC (OUI 00-04-0E)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 [hci0] 0.046988
> HCI Event: Command Complete (0x0e) plen 11 [hci0] 0.050948
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 120 ACL max packet: 20
SCO MTU: 24 SCO max packet: 5
< HCI Command: Read Class of Device (0x03|0x0023) plen 0 [hci0] 0.051235
> HCI Event: Command Complete (0x0e) plen 7 [hci0] 0.055000
Read Class of Device (0x03|0x0023) ncmd 1
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.055261
> HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.092918
Read Local Name (0x03|0x0014) ncmd 1
Status: Success (0x00)
Name:
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0 [hci0] 0.093212
> HCI Event: Command Complete (0x0e) plen 6 [hci0] 0.096713
Read Voice Setting (0x03|0x0025) ncmd 1
Status: Success (0x00)
Setting: 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1 [hci0] 0.096974
Type: 0x00
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.101024
Set Event Filter (0x03|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: Write Connection Accept T.. (0x03|0x0016) plen 2 [hci0]
0.101262
Timeout: 20000.000 msec (0x7d00)
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.105011
Write Connection Accept Timeout (0x03|0x0016) ncmd 1
Status: Success (0x00)
< HCI Command: Read Page Scan Activity (0x03|0x001b) plen 0 [hci0] 0.105254
> HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.108002
Read Page Scan Activity (0x03|0x001b) ncmd 1
Status: Success (0x00)
Interval: 1280.000 msec (0x0800)
Window: 11.250 msec (0x0012)
< HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 [hci0] 0.108255
> HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.111710
Read Page Scan Type (0x03|0x0046) ncmd 1
Status: Success (0x00)
Type: Standard Scan (0x00)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.111960
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete
Synchronous Connection Complete
Synchronous Connection Changed
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.114810
Set Event Mask (0x03|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0]
0.114948
> HCI Event: Command Status (0x0f) plen 4 [hci0] 0.117791
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Unknown HCI Command (0x01)
< HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 0.121133
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.131017
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported Feat.. (0x04|0x0003) plen 0 [hci0]
0.131157
> HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.134997
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0xff 0x05 0x00 0x18 0x18 0x00 0x00
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Hold mode
Sniff mode
Park state
Power control requests
Channel quality driven data rate (CQDDR)
SCO link
HV2 packets
HV3 packets
u-law log synchronous data
A-law log synchronous data
CVSD synchronous data
Power control
AFH capable slave
AFH classification slave
AFH capable master
AFH classification master
< HCI Command: Read Local Version Inform.. (0x04|0x0001) plen 0 [hci0]
0.135164
> HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.138030
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: 2 - 0x2006
LMP version: 2 - 0x1806
Manufacturer: AVM Berlin (31)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci0] 0.138178
> HCI Event: Command Complete (0x0e) plen 10 [hci0] 0.141784
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:04:0E:8D:1C:CC (OUI 00-04-0E)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 [hci0] 0.141965
> HCI Event: Command Complete (0x0e) plen 11 [hci0] 0.144741
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 120 ACL max packet: 20
SCO MTU: 24 SCO max packet: 5
< HCI Command: Read Class of Device (0x03|0x0023) plen 0 [hci0] 0.144831
> HCI Event: Command Complete (0x0e) plen 7 [hci0] 0.148377
Read Class of Device (0x03|0x0023) ncmd 1
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.148518
> HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.187913
Read Local Name (0x03|0x0014) ncmd 1
Status: Success (0x00)
Name:
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0 [hci0] 0.188103
> HCI Event: Command Complete (0x0e) plen 6 [hci0] 0.191659
Read Voice Setting (0x03|0x0025) ncmd 1
Status: Success (0x00)
Setting: 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1 [hci0] 0.191790
Type: 0x00
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.195844
Set Event Filter (0x03|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: Write Connection Accept T.. (0x03|0x0016) plen 2 [hci0]
0.195971
Timeout: 20000.000 msec (0x7d00)
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.198667
Write Connection Accept Timeout (0x03|0x0016) ncmd 1
Status: Success (0x00)
< HCI Command: Read Page Scan Activity (0x03|0x001b) plen 0 [hci0] 0.198911
> HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.202899
Read Page Scan Activity (0x03|0x001b) ncmd 1
Status: Success (0x00)
Interval: 1280.000 msec (0x0800)
Window: 11.250 msec (0x0012)
< HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 [hci0] 0.203040
> HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.206659
Read Page Scan Type (0x03|0x0046) ncmd 1
Status: Success (0x00)
Type: Standard Scan (0x00)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.206842
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete
Synchronous Connection Complete
Synchronous Connection Changed
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.209839
Set Event Mask (0x03|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0]
0.210014
> HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Unknown HCI Command (0x01)
>
>> debian-capi:~# lsusb -v -d 057c:3800
> Can you include /sys/kernel/debug/usb/devices from this device.
After mounting debugfs with
*mount -t debugfs none /sys/kernel/debug*
I got this:
debian-capi:~# cat /sys/kernel/debug/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.10
S: Manufacturer=Linux 3.10.1 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:0b.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 8
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 3.10
S: Manufacturer=Linux 3.10.1 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:06.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=80ee ProdID=0021 Rev= 1.00
S: Manufacturer=VirtualBox
S: Product=USB Tablet
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=10ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0675 ProdID=1688 Rev= 1.00
S: Manufacturer=USB ISDN TA
S: Product=USB ISDN TA
S: SerialNumber=USB ISDN TA
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 64mA
I:* If#= 0 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=80 Prot=ff Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=ff Driver=HFC-S_USB
I:* If#= 1 Alt= 1 #EPs= 8 Cls=0a(data ) Sub=00 Prot=ff Driver=HFC-S_USB
E: Ad=05(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=06(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=86(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=07(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=87(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=08(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=88(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 7 Cls=0a(data ) Sub=00 Prot=ff Driver=HFC-S_USB
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=4ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=4ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=16ms
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=4ms
I: If#= 1 Alt= 3 #EPs= 8 Cls=0a(data ) Sub=00 Prot=ff Driver=HFC-S_USB
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=06(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=86(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 8 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=057c ProdID=3800 Rev=15.00
S: Manufacturer=Bluetooth Device
S: Product=Bluetooth Device
S: SerialNumber=CC1C8D0E0400
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=200mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
debian-capi:~#
Oh i forgot to mention that I run this under Virtualbox 4.2.16 with
Windows7 64bit host.
I hope that i still get support?
If not I also can put this into some real hardware with latest kernel.
--
Gruss, Joerg
next prev parent reply other threads:[~2013-07-19 6:26 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-18 13:26 057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something Jörg Esser
2013-07-18 14:13 ` Marcel Holtmann
2013-07-19 6:26 ` Jörg Esser [this message]
2013-07-19 13:49 ` Marcel Holtmann
2013-07-19 16:20 ` Johan Hedberg
2013-07-22 7:10 ` Jörg Esser
2013-07-22 14:22 ` Marcel Holtmann
2013-07-23 23:39 ` Johan Hedberg
2013-07-25 9:10 ` Jörg Esser
2013-07-25 10:55 ` Gustavo Padovan
2013-07-25 14:51 ` Marcel Holtmann
2013-07-25 14:40 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2011-11-18 15:28 Michael Schmitt
2011-11-18 15:36 ` Johan Hedberg
2011-11-18 15:49 ` Michael Schmitt
2011-11-18 16:21 ` Johan Hedberg
2011-11-18 16:34 ` Michael Schmitt
2011-11-18 20:30 ` Johan Hedberg
2011-11-20 15:27 ` Michael Schmitt
2011-11-27 10:04 ` Michael Schmitt
2011-11-28 8:42 ` Andrei Emeltchenko
2011-11-21 8:57 ` Andrei Emeltchenko
2011-11-21 9:12 ` Andrei Emeltchenko
2011-11-21 9:13 ` Marcel Holtmann
2011-11-21 10:22 ` Andrei Emeltchenko
2011-11-21 13:03 ` Marcel Holtmann
2011-11-21 10:35 ` Johan Hedberg
2011-11-21 13:04 ` Marcel Holtmann
2011-11-21 15:21 ` Johan Hedberg
2011-11-18 16:17 ` Michael Schmitt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51E8DBFF.4060702@boh.de \
--to=jackfritt@boh.de \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.