From: Muhammad Shakeel <muhammad_shakeel@mentor.com>
To: "openembedded-core@lists.openembedded.org"
<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH] bash: Add ptest
Date: Mon, 22 Jul 2013 15:40:22 +0500 [thread overview]
Message-ID: <51ED0C16.7060707@mentor.com> (raw)
In-Reply-To: <1373008998-24899-1-git-send-email-muhammad_shakeel@mentor.com>
On 07/05/2013 12:23 PM, Shakeel, Muhammad wrote:
> From: Muhammad Shakeel <muhammad_shakeel@mentor.com>
>
> ptest support was already added for v4.2 but for the distros
> using GPLv2 version of bash (3.2.48) this update is required.
>
> Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
> ---
> .../bash/bash-3.2.48/build-tests.patch | 44 ++++++++++++++++++++
> meta/recipes-extended/bash/bash-3.2.48/run-ptest | 2 +
> .../bash/bash-3.2.48/test-output.patch | 25 +++++++++++
> meta/recipes-extended/bash/bash_3.2.48.bb | 3 ++
> 4 files changed, 74 insertions(+)
>
> diff --git a/meta/recipes-extended/bash/bash-3.2.48/build-tests.patch b/meta/recipes-extended/bash/bash-3.2.48/build-tests.patch
> new file mode 100644
> index 0000000..91341ee
> --- /dev/null
> +++ b/meta/recipes-extended/bash/bash-3.2.48/build-tests.patch
> @@ -0,0 +1,44 @@
> +Add 'ptest' target to Makefile, to run tests without checking dependencies.
> +
> +Signed-off-by: Anders Roxell <anders.roxell@enea.com>
> +Upstream-Status: Pending
> +---
> +diff -dNaur bash-3.2.48/Makefile.in.orig bash-3.2.48/Makefile.in
> +--- bash-3.2.48/Makefile.in.orig 2006-08-17 23:03:35.000000000 +0500
> ++++ bash-3.2.48/Makefile.in 2013-07-02 20:20:07.512709327 +0500
> +@@ -803,17 +803,31 @@
> + fi
> +
> + recho$(EXEEXT): $(SUPPORT_SRC)recho.c
> +- @$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) -o $@ $(SUPPORT_SRC)recho.c ${LIBS_FOR_BUILD}
> ++ @$(CC) $(CCFLAGS) -o $@ $<
> +
> + zecho$(EXEEXT): $(SUPPORT_SRC)zecho.c
> +- @$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) -o $@ $(SUPPORT_SRC)zecho.c ${LIBS_FOR_BUILD}
> ++ @$(CC) $(CCFLAGS) -o $@ $<
> +
> + printenv$(EXEEXT): $(SUPPORT_SRC)printenv.c
> +- @$(CC_FOR_BUILD) $(CCFLAGS_FOR_BUILD) -o $@ $(SUPPORT_SRC)printenv.c ${LIBS_FOR_BUILD}
> ++ @$(CC) $(CCFLAGS) -o $@ $<
> +
> +-test tests check: force $(Program) $(TESTS_SUPPORT)
> ++test tests check:
> ++ @$(MAKE) install-test
> ++ @$(MAKE) runtest
> ++
> ++install-test: buildtest
> ++ifeq ($(origin INSTALL_TEST_DIR), undefined)
> + @-test -d tests || mkdir tests
> + @cp $(TESTS_SUPPORT) tests
> ++else
> ++ @-test -d $(INSTALL_TEST_DIR) || mkdir -p $(INSTALL_TEST_DIR)
> ++ @cp -r $(srcdir)/tests/* $(INSTALL_TEST_DIR)/
> ++ @cp $(TESTS_SUPPORT) $(INSTALL_TEST_DIR)
> ++endif
> ++
> ++buildtest: force $(Program) $(TESTS_SUPPORT)
> ++
> ++runtest:
> + @( cd $(srcdir)/tests && \
> + PATH=$(BUILD_DIR)/tests:$$PATH THIS_SH=$(THIS_SH) $(SHELL) ${TESTSCRIPT} )
> +
> diff --git a/meta/recipes-extended/bash/bash-3.2.48/run-ptest b/meta/recipes-extended/bash/bash-3.2.48/run-ptest
> new file mode 100644
> index 0000000..8dd3b99
> --- /dev/null
> +++ b/meta/recipes-extended/bash/bash-3.2.48/run-ptest
> @@ -0,0 +1,2 @@
> +#!/bin/sh
> +make -k THIS_SH=/bin/bash BUILD_DIR=. runtest
> diff --git a/meta/recipes-extended/bash/bash-3.2.48/test-output.patch b/meta/recipes-extended/bash/bash-3.2.48/test-output.patch
> new file mode 100644
> index 0000000..2b09b7d
> --- /dev/null
> +++ b/meta/recipes-extended/bash/bash-3.2.48/test-output.patch
> @@ -0,0 +1,25 @@
> +Add FAIL/PASS output to test output.
> +
> +Signed-off-by: Björn Stenberg <bjst@enea.com>
> +Upstream-Status: Pending
> +---
> +diff -uNr a/tests/run-all b/tests/run-all
> +--- a/tests/run-all 1999-10-08 17:07:46.000000000 +0200
> ++++ b/tests/run-all 2012-10-27 21:04:18.663331887 +0200
> +@@ -22,7 +22,15 @@
> + case $x in
> + $0|run-minimal|run-gprof) ;;
> + *.orig|*~) ;;
> +- *) echo $x ; sh $x ;;
> ++ *) echo $x
> ++ output=`sh $x`
> ++ if [ -n "$output" ]; then
> ++ echo "$output"
> ++ echo "FAIL: $x"
> ++ else
> ++ echo "PASS: $x"
> ++ fi
> ++ ;;
> + esac
> + done
> +
> diff --git a/meta/recipes-extended/bash/bash_3.2.48.bb b/meta/recipes-extended/bash/bash_3.2.48.bb
> index 4e6f0f3..fe04b28 100644
> --- a/meta/recipes-extended/bash/bash_3.2.48.bb
> +++ b/meta/recipes-extended/bash/bash_3.2.48.bb
> @@ -10,6 +10,9 @@ SRC_URI = "${GNU_MIRROR}/bash/bash-${PV}.tar.gz;name=tarball \
> ${GNU_MIRROR}/bash/bash-3.2-patches/bash32-050;apply=yes;striplevel=0;name=patch002 \
> ${GNU_MIRROR}/bash/bash-3.2-patches/bash32-051;apply=yes;striplevel=0;name=patch003 \
> file://mkbuiltins_have_stringize.patch \
> + file://build-tests.patch \
> + file://test-output.patch \
> + file://run-ptest \
> "
>
> SRC_URI[tarball.md5sum] = "338dcf975a93640bb3eaa843ca42e3f8"
Hi Saul,
Can you please comment on the status of this patch?
Best Regards
Shakeel
next prev parent reply other threads:[~2013-07-22 10:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-05 7:23 [PATCH] bash: Add ptest Shakeel, Muhammad
2013-07-22 10:40 ` Muhammad Shakeel [this message]
2013-07-22 14:30 ` Saul Wold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51ED0C16.7060707@mentor.com \
--to=muhammad_shakeel@mentor.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.