From: Gordan Bobic <gordan@bobich.net>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xen.org
Subject: Re: Bug: Limitation of <=2GB RAM in domU persists with 4.3.0
Date: Wed, 24 Jul 2013 23:15:13 +0100 [thread overview]
Message-ID: <51F051F1.5050806@bobich.net> (raw)
In-Reply-To: <20130724163102.GA6308@phenom.dumpdata.com>
[-- Attachment #1: Type: text/plain, Size: 388 bytes --]
Attached are the logs (loglvl=all) and configs for 2GB (working) and 8GB
(screen corruption + domU crash + sometimes dom0 crashing with it).
I can see in the xl-dmesg log in 8GB case that there is memory remapping
going on to allow for the lowmem MMIO hole, but it doesn't seem to help.
I will get a Linux VM up and running tomorrow and get a comparison of
domU BARs vs. e820 map.
[-- Attachment #2: dmesg.log.2GB --]
[-- Type: text/plain, Size: 77202 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.9.9-2.el6xen.x86_64 (root@normandy) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Tue Jul 16 15:52:11 BST 2013
Command line: ro root=UUID=ea61c60b-8e91-4cc3-ab17-f6b5097f1e87 rd_MD_UUID=26fb9899:f3adb40f:b22e37a7:5f2db70a rd_MD_UUID=fbf20e02:97089c2c:1d0e1847:9e192fe8 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=uk selinux=0 elevator=deadline intel_iommu=on elevator=deadline iomem=relaxed video=DVI-I-1:edid/1920x2400 video=DVI-I-2:1920x2400 video=DIN-1:d
Freeing 9d-100 pfn range: 99 pages freed
1-1 mapping on 9d->100
Freeing 3f790-100000 pfn range: 788592 pages freed
1-1 mapping on 3f790->100000
Released 788691 pages of unused memory
Set 788691 page(s) to 1-1 mapping
Populating bcf90e-c901e1 pfn range: 788691 pages added
e820: BIOS-provided physical RAM map:
Xen: [mem 0x0000000000000000-0x000000000009cfff] usable
Xen: [mem 0x000000000009d400-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x000000003f78ffff] usable
Xen: [mem 0x000000003f790000-0x000000003f79dfff] ACPI data
Xen: [mem 0x000000003f79e000-0x000000003f7cffff] ACPI NVS
Xen: [mem 0x000000003f7d0000-0x000000003f7dffff] reserved
Xen: [mem 0x000000003f7e7000-0x000000003fffffff] reserved
Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Xen: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
Xen: [mem 0x0000000100000000-0x0000000cbfffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./EVGA Classified SR-2, BIOS 080016 04/24/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xcc0000 max_arch_pfn = 0x400000000
e820: last_pfn = 0x3f790 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000096000] 96000 size 28672
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0xc8fe00000-0xc8fffffff]
[mem 0xc8fe00000-0xc8fffffff] page 4k
BRK [0x01bc0000, 0x01bc0fff] PGTABLE
BRK [0x01bc1000, 0x01bc1fff] PGTABLE
init_memory_mapping: [mem 0xc8c000000-0xc8fdfffff]
[mem 0xc8c000000-0xc8fdfffff] page 4k
BRK [0x01bc2000, 0x01bc2fff] PGTABLE
BRK [0x01bc3000, 0x01bc3fff] PGTABLE
BRK [0x01bc4000, 0x01bc4fff] PGTABLE
init_memory_mapping: [mem 0xc80000000-0xc8bffffff]
[mem 0xc80000000-0xc8bffffff] page 4k
init_memory_mapping: [mem 0x00100000-0x3f78ffff]
[mem 0x00100000-0x3f78ffff] page 4k
init_memory_mapping: [mem 0x100000000-0xc7fffffff]
[mem 0x100000000-0xc7fffffff] page 4k
init_memory_mapping: [mem 0xc90000000-0xcbfffffff]
[mem 0xc90000000-0xcbfffffff] page 4k
RAMDISK: [mem 0x01f70000-0x061acfff]
ACPI: RSDP 00000000000f9f70 00024 (v02 ACPIAM)
ACPI: XSDT 000000003f790100 00064 (v01 042413 XSDT1438 20130424 MSFT 00000097)
ACPI: FACP 000000003f790290 000F4 (v04 042413 FACP1438 20130424 MSFT 00000097)
ACPI: DSDT 000000003f7904f0 058A3 (v02 1W555 1W555A58 00000A58 INTL 20051117)
ACPI: FACS 000000003f79e000 00040
ACPI: APIC 000000003f790390 00118 (v02 042413 APIC1438 20130424 MSFT 00000097)
ACPI: MCFG 000000003f7904b0 0003C (v01 042413 OEMMCFG 20130424 MSFT 00000097)
ACPI: OEMB 000000003f79e040 00082 (v01 042413 OEMB1438 20130424 MSFT 00000097)
ACPI: SRAT 000000003f79a4f0 00250 (v02 042413 OEMSRAT 00000001 INTL 00000001)
ACPI: HPET 000000003f79a740 00038 (v01 042413 OEMHPET 20130424 MSFT 00000097)
ACPI: XMAR 000000003f79e0d0 00120 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 000000003f7a4c70 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
NUMA turned off
Faking a node at [mem 0x0000000000000000-0x0000000cbfffffff]
Initmem setup node 0 [mem 0x00000000-0xcbfffffff]
NODE_DATA [mem 0xc901ba000-0xc901e0fff]
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0xcbfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x3f78ffff]
node 0: [mem 0x100000000-0xcbfffffff]
On node 0 totalpages: 12580652
DMA zone: 56 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 3499 pages used for memmap
DMA32 zone: 255888 pages, LIFO batch:31
Normal zone: 168448 pages used for memmap
Normal zone: 12320768 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 24 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 0000000000100000
PM: Registered nosave memory: 000000003f790000 - 000000003f79e000
PM: Registered nosave memory: 000000003f79e000 - 000000003f7d0000
PM: Registered nosave memory: 000000003f7d0000 - 000000003f7e0000
PM: Registered nosave memory: 000000003f7e0000 - 000000003f7e7000
PM: Registered nosave memory: 000000003f7e7000 - 0000000040000000
PM: Registered nosave memory: 0000000040000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
e820: [mem 0x40000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on Xen
Xen version: 4.3.0 (preserve-AD)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:24 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880c83c00000 s84032 r8192 d22464 u131072
pcpu-alloc: s84032 r8192 d22464 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12408627
Policy zone: Normal
Kernel command line: ro root=UUID=ea61c60b-8e91-4cc3-ab17-f6b5097f1e87 rd_MD_UUID=26fb9899:f3adb40f:b22e37a7:5f2db70a rd_MD_UUID=fbf20e02:97089c2c:1d0e1847:9e192fe8 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=uk selinux=0 elevator=deadline intel_iommu=on elevator=deadline iomem=relaxed video=DVI-I-1:edid/1920x2400 video=DVI-I-2:1920x2400 video=DIN-1:d
Intel-IOMMU: enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
software IO TLB [mem 0xc55800000-0xc59800000] (64MB) mapped at [ffff880c55800000-ffff880c597fffff]
Memory: 48504264k/53477376k available (5525k kernel code, 3154768k absent, 1818344k reserved, 2610k data, 1732k init)
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=24.
NR_IRQS:4352 nr_irqs:1280 16
xen: sci override: global_irq=20 trigger=0 polarity=1
xen: registering gsi 20 triggering 0 polarity 1
xen: --> pirq=20 -> irq=9 (gsi=9)
xen: acpi sci 9
xen: --> pirq=1 -> irq=1 (gsi=1)
xen: --> pirq=2 -> irq=2 (gsi=2)
xen: --> pirq=3 -> irq=3 (gsi=3)
xen: --> pirq=4 -> irq=4 (gsi=4)
xen: --> pirq=5 -> irq=5 (gsi=5)
xen: --> pirq=6 -> irq=6 (gsi=6)
xen: --> pirq=7 -> irq=7 (gsi=7)
xen: --> pirq=8 -> irq=8 (gsi=8)
xen: --> pirq=10 -> irq=10 (gsi=10)
xen: --> pirq=11 -> irq=11 (gsi=11)
xen: --> pirq=12 -> irq=12 (gsi=12)
xen: --> pirq=13 -> irq=13 (gsi=13)
xen: --> pirq=14 -> irq=14 (gsi=14)
xen: --> pirq=15 -> irq=15 (gsi=15)
Console: colour VGA+ 80x25
console [tty0] enabled
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
tsc: Detected 3321.722 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6643.44 BogoMIPS (lpj=3321722)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20130117
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 21258 entries in 84 pages
Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
installing Xen timer for CPU 1
installing Xen timer for CPU 2
installing Xen timer for CPU 3
installing Xen timer for CPU 4
installing Xen timer for CPU 5
installing Xen timer for CPU 6
installing Xen timer for CPU 7
installing Xen timer for CPU 8
installing Xen timer for CPU 9
installing Xen timer for CPU 10
installing Xen timer for CPU 11
installing Xen timer for CPU 12
installing Xen timer for CPU 13
installing Xen timer for CPU 14
installing Xen timer for CPU 15
installing Xen timer for CPU 16
installing Xen timer for CPU 17
installing Xen timer for CPU 18
installing Xen timer for CPU 19
installing Xen timer for CPU 20
installing Xen timer for CPU 21
installing Xen timer for CPU 22
installing Xen timer for CPU 23
Brought up 24 CPUs
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x3f79e000-0x3f7cffff] (204800 bytes)
Grant tables using version 2 layout.
Grant table initialized
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000003f79e1f0 053DC (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 053DC (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 000000003f7a35d0 00C88 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00C88 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: SSDT 000000003f7a4260 00A0A (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00A0A (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 10: [mem 0xfec8a000-0xfec8afff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0x9980-0x999f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0x9a00-0x9a1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0x9a80-0x9a9f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xf3df8000-0xf3df83ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf3df4000-0xf3df7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0x9b00-0x9b1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0x9b80-0x9b9f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0x9c00-0x9c1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xf3dfa000-0xf3dfa3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x9d00-0x9d07]
pci 0000:00:1f.2: reg 14: [io 0x9f00-0x9f03]
pci 0000:00:1f.2: reg 18: [io 0x9e80-0x9e87]
pci 0000:00:1f.2: reg 1c: [io 0x9e00-0x9e03]
pci 0000:00:1f.2: reg 20: [io 0x9d80-0x9d9f]
pci 0000:00:1f.2: reg 24: [mem 0xf3dfc000-0xf3dfc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf3dfe000-0xf3dfe0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:0f:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:0f:00.0: reg 10: [mem 0xfbefe000-0xfbefffff 64bit]
pci 0000:0f:00.0: PME# supported from D0 D3hot
pci 0000:00:02.0: PCI bridge to [bus 0f]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:09:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 09-0e]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xd7e00000-0xdfffffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0a:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:01.0: [10de:05b1] type 01 class 0x060400
pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:02.0: [10de:05b1] type 01 class 0x060400
pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a-0e]
pci 0000:09:00.0: bridge window [io 0xe000-0xefff]
pci 0000:09:00.0: bridge window [mem 0xd7e00000-0xdfffffff]
pci 0000:09:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0e:00.0: [1002:9442] type 00 class 0x030000
pci 0000:0e:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0e:00.0: reg 18: [mem 0xd8000000-0xd800ffff 64bit]
pci 0000:0e:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:0e:00.0: reg 30: [mem 0xd7fe0000-0xd7ffffff pref]
pci 0000:0e:00.0: supports D1 D2
pci 0000:0e:00.1: [1002:aa30] type 00 class 0x040300
pci 0000:0e:00.1: reg 10: [mem 0xdc000000-0xdc003fff 64bit]
pci 0000:0e:00.1: supports D1 D2
pci 0000:0a:00.0: PCI bridge to [bus 0e]
pci 0000:0a:00.0: bridge window [io 0xe000-0xefff]
pci 0000:0a:00.0: bridge window [mem 0xd7f00000-0xdfffffff]
pci 0000:0a:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0c:00.0: [1102:7006] type 01 class 0x060400
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:0a:01.0: PCI bridge to [bus 0c-0d]
pci 0000:0a:01.0: bridge window [mem 0xd7e00000-0xd7efffff]
pci 0000:0d:00.0: [1102:0009] type 00 class 0x040300
pci 0000:0d:00.0: reg 10: [mem 0xd7efc000-0xd7efffff]
pci 0000:0d:00.0: supports D1 D2
pci 0000:0c:00.0: PCI bridge to [bus 0d]
pci 0000:0c:00.0: bridge window [mem 0xd7e00000-0xd7efffff]
pci 0000:0a:02.0: PCI bridge to [bus 0b]
pci 0000:05:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 05-08]
pci 0000:00:07.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xf4000000-0xfbdfffff]
pci 0000:00:07.0: bridge window [mem 0xa8000000-0xbfffffff 64bit pref]
pci 0000:06:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:02.0: [10de:05b1] type 01 class 0x060400
pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06-08]
pci 0000:05:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:05:00.0: bridge window [mem 0xf4000000-0xfbdfffff]
pci 0000:05:00.0: bridge window [mem 0xa8000000-0xbfffffff 64bit pref]
pci 0000:08:00.0: [10de:06d8] type 00 class 0x030000
pci 0000:08:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
pci 0000:08:00.0: reg 14: [mem 0xb8000000-0xbfffffff 64bit pref]
pci 0000:08:00.0: reg 1c: [mem 0xb4000000-0xb7ffffff 64bit pref]
pci 0000:08:00.0: reg 24: [io 0xdf80-0xdfff]
pci 0000:08:00.0: reg 30: [mem 0xfbd00000-0xfbd7ffff pref]
pci 0000:08:00.1: [10de:0be5] type 00 class 0x040300
pci 0000:08:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff]
pci 0000:06:00.0: PCI bridge to [bus 08]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xf8000000-0xfbdfffff]
pci 0000:06:00.0: bridge window [mem 0xb4000000-0xbfffffff 64bit pref]
pci 0000:07:00.0: [10de:06d9] type 00 class 0x030000
pci 0000:07:00.0: reg 10: [mem 0xf4000000-0xf5ffffff]
pci 0000:07:00.0: reg 14: [mem 0xa8000000-0xafffffff 64bit pref]
pci 0000:07:00.0: reg 1c: [mem 0xb0000000-0xb3ffffff 64bit pref]
pci 0000:07:00.0: reg 24: [io 0xcf80-0xcfff]
pci 0000:07:00.0: reg 30: [mem 0xf7f00000-0xf7f7ffff pref]
pci 0000:07:00.1: [10de:0be5] type 00 class 0x040300
pci 0000:07:00.1: reg 10: [mem 0xf7ffc000-0xf7ffffff]
pci 0000:06:02.0: PCI bridge to [bus 07]
pci 0000:06:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:02.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:06:02.0: bridge window [mem 0xa8000000-0xb3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:03:00.0: [11ab:4380] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [mem 0xf3fdc000-0xf3fdffff 64bit]
pci 0000:03:00.0: reg 18: [io 0xbf00-0xbfff]
pci 0000:03:00.0: reg 30: [mem 0xf3fe0000-0xf3ffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.2: bridge window [mem 0xf3f00000-0xf3ffffff]
pci 0000:02:00.0: [11ab:4380] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0xf3edc000-0xf3edffff 64bit]
pci 0000:02:00.0: reg 18: [io 0xaf00-0xafff]
pci 0000:02:00.0: reg 30: [mem 0xf3ee0000-0xf3efffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xf3e00000-0xf3efffff]
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x40000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
ACPI: No dock devices found.
xen/balloon: Initialising balloon driver.
xen-balloon: Initialising balloon driver.
xen/balloon: Xen selfballooning driver disabled for domain0.
vgaarb: device added: PCI:0000:0e:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:08:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
vgaarb: bridge control possible 0000:08:00.0
vgaarb: bridge control possible 0000:0e:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
PCI: root bus fe: using default resources
PCI: Probing PCI hardware (bus fe)
PCI host bridge to bus 0000:fe
pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:ff:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:ff:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0x3f790000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
xen: registering gsi 8 triggering 1 polarity 0
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
xen: registering gsi 13 triggering 1 polarity 0
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0a00-0x0adf] has been reserved
system 00:05: [io 0x0ae0-0x0aef] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0x00100000-0x3fffffff] could not be reserved
system 00:0a: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
PM-Timer failed consistency check (0x0xffffff) - aborting.
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:02.0: PCI bridge to [bus 0f]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:0a:00.0: PCI bridge to [bus 0e]
pci 0000:0a:00.0: bridge window [io 0xe000-0xefff]
pci 0000:0a:00.0: bridge window [mem 0xd7f00000-0xdfffffff]
pci 0000:0a:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0c:00.0: PCI bridge to [bus 0d]
pci 0000:0c:00.0: bridge window [mem 0xd7e00000-0xd7efffff]
pci 0000:0a:01.0: PCI bridge to [bus 0c-0d]
pci 0000:0a:01.0: bridge window [mem 0xd7e00000-0xd7efffff]
pci 0000:0a:02.0: PCI bridge to [bus 0b]
pci 0000:09:00.0: PCI bridge to [bus 0a-0e]
pci 0000:09:00.0: bridge window [io 0xe000-0xefff]
pci 0000:09:00.0: bridge window [mem 0xd7e00000-0xdfffffff]
pci 0000:09:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 09-0e]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xd7e00000-0xdfffffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 08]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xf8000000-0xfbdfffff]
pci 0000:06:00.0: bridge window [mem 0xb4000000-0xbfffffff 64bit pref]
pci 0000:06:02.0: PCI bridge to [bus 07]
pci 0000:06:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:02.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:06:02.0: bridge window [mem 0xa8000000-0xb3ffffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06-08]
pci 0000:05:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:05:00.0: bridge window [mem 0xf4000000-0xfbdfffff]
pci 0000:05:00.0: bridge window [mem 0xa8000000-0xbfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 05-08]
pci 0000:00:07.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xf4000000-0xfbdfffff]
pci 0000:00:07.0: bridge window [mem 0xa8000000-0xbfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.2: bridge window [mem 0xf3f00000-0xf3ffffff]
pci 0000:00:1c.2: bridge window [mem 0x40400000-0x405fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xf3e00000-0xf3efffff]
pci 0000:00:1c.4: bridge window [mem 0x40600000-0x407fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: enabling device (0104 -> 0107)
xen: registering gsi 17 triggering 0 polarity 1
xen: --> pirq=17 -> irq=17 (gsi=17)
xen: registering gsi 18 triggering 0 polarity 1
xen: --> pirq=18 -> irq=18 (gsi=18)
xen: registering gsi 17 triggering 0 polarity 1
Already setup the GSI :17
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x40000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:0f: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
pci_bus 0000:09: resource 1 [mem 0xd7e00000-0xdfffffff]
pci_bus 0000:09: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xd7e00000-0xdfffffff]
pci_bus 0000:0a: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:0e: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0e: resource 1 [mem 0xd7f00000-0xdfffffff]
pci_bus 0000:0e: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xd7e00000-0xd7efffff]
pci_bus 0000:0d: resource 1 [mem 0xd7e00000-0xd7efffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf4000000-0xfbdfffff]
pci_bus 0000:05: resource 2 [mem 0xa8000000-0xbfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xf4000000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xa8000000-0xbfffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xf8000000-0xfbdfffff]
pci_bus 0000:08: resource 2 [mem 0xb4000000-0xbfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 2 [mem 0xa8000000-0xb3ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0x40000000-0x401fffff]
pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf3f00000-0xf3ffffff]
pci_bus 0000:03: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf3e00000-0xf3efffff]
pci_bus 0000:02: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0x40000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
xen: registering gsi 16 triggering 0 polarity 1
xen: --> pirq=16 -> irq=16 (gsi=16)
xen: registering gsi 21 triggering 0 polarity 1
xen: --> pirq=21 -> irq=21 (gsi=21)
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
xen: registering gsi 23 triggering 0 polarity 1
xen: --> pirq=23 -> irq=23 (gsi=23)
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
xen: registering gsi 29 triggering 0 polarity 1
xen: --> pirq=29 -> irq=29 (gsi=29)
pci 0000:0e:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 67828k freed
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1374703268.000:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcieport 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0e:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:0a:01.0: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:0a:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pcieport 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:06:02.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
intel_idle: intel_idle yielding to none
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
Monitor-Mwait will be used to enter C-3 state
Warning: Processor Platform Limit not supported.
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf3df8000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3dfa000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009980
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xen: registering gsi 21 triggering 0 polarity 1
Already setup the GSI :21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009a00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009a80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009b00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009b80
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009c00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 37cced82f1f9fd38d8ceb662cc0603433dd14ab8'
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:02: setting system clock to 2013-07-24 22:01:08 UTC (1374703268)
Freeing unused kernel memory: 1732k freed
dracut: dracut-004-53.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
udevd (200): /proc/200/oom_adj is deprecated, please use /proc/200/oom_score_adj instead.
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
xen: registering gsi 24 triggering 0 polarity 1
xen: --> pirq=24 -> irq=24 (gsi=24)
[drm] initializing kernel modesetting (RV770 0x1002:0x9442 0x174B:0xE810).
[drm] register mmio base: 0xD8000000
[drm] register mmio size: 65536
ATOM BIOS: Wekiva
radeon 0000:0e:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:0e:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 24286922 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading RV770 Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:0e:00.0: WB enabled
radeon 0000:0e:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880c47d98c00
radeon 0000:0e:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880c47d98c0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:0e:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] DIN-1
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I-2
[drm] HPD2
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_KLDSCP_LVTMA
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
parse error at position 4 in video mode 'edid/1920x2400'
[drm] forcing DIN-1 connector OFF
usb 2-6: new high-speed USB device number 2 using ehci-pci
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 36864000
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: radeondrmfb (fb0) is primary device
usb 2-6: New USB device found, idVendor=0424, idProduct=2504
usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 3 ports detected
usb 4-1: new low-speed USB device number 2 using uhci_hcd
usb 4-1: New USB device found, idVendor=045e, idProduct=00dd
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Comfort Curve Keyboard 2000
usb 4-1: Manufacturer: Microsoft
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
hid-generic 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.1-1/input0
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input3
hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.1-1/input1
usb 4-2: new full-speed USB device number 3 using uhci_hcd
usb 4-2: New USB device found, idVendor=1532, idProduct=002f
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Razer Imperator
usb 4-2: Manufacturer: Razer
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
hid-generic 0003:1532:002F.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Imperator] on usb-0000:00:1a.1-2/input0
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input5
hid-generic 0003:1532:002F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Imperator] on usb-0000:00:1a.1-2/input1
Console: switching to colour frame buffer device 240x150
usb 2-6.1: new high-speed USB device number 3 using ehci-pci
usb 2-6.1: New USB device found, idVendor=0424, idProduct=2503
usb 2-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-6.1:1.0: USB hub found
hub 2-6.1:1.0: 3 ports detected
usb 2-6.2: new low-speed USB device number 4 using ehci-pci
usb 2-6.2: New USB device found, idVendor=045e, idProduct=0780
usb 2-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6.2: Product: Comfort Curve Keyboard 3000
usb 2-6.2: Manufacturer: Microsoft
input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input6
hid-generic 0003:045E:0780.0005: input,hidraw4: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:1d.7-6.2/input0
input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.1/input/input7
hid-generic 0003:045E:0780.0006: input,hidraw5: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:1d.7-6.2/input1
usb 2-6.3: new full-speed USB device number 5 using ehci-pci
usb 2-6.3: New USB device found, idVendor=1532, idProduct=002f
usb 2-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6.3: Product: Razer Imperator
usb 2-6.3: Manufacturer: Razer
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.3/2-6.3:1.0/input/input8
hid-generic 0003:1532:002F.0007: input,hidraw6: USB HID v1.11 Mouse [Razer Razer Imperator] on usb-0000:00:1d.7-6.3/input0
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.3/2-6.3:1.1/input/input9
hid-generic 0003:1532:002F.0008: input,hidraw7: USB HID v1.11 Keyboard [Razer Razer Imperator] on usb-0000:00:1d.7-6.3/input1
usb 2-6.1.1: new high-speed USB device number 6 using ehci-pci
radeon 0000:0e:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:0e:00.0: registered panic notifier
[drm] Initialized radeon 2.30.0 20080528 for 0000:0e:00.0 on minor 0
usb 2-6.1.1: New USB device found, idVendor=0424, idProduct=2228
usb 2-6.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
dracut: Starting plymouth daemon
usb 2-6.1.1: Product: Flash Card Reader
usb 2-6.1.1: Manufacturer: Generic
usb 2-6.1.1: SerialNumber: 000022272228
Initializing USB Mass Storage driver...
scsi0 : usb-storage 2-6.1.1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-6.1.2: new full-speed USB device number 7 using ehci-pci
usb 2-6.1.2: New USB device found, idVendor=0d8c, idProduct=000e
usb 2-6.1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-6.1.2: Product: Generic USB Audio Device
dracut: rd_NO_DM: removing DM RAID activation
sky2: driver version 1.30
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
sky2 0000:03:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:03:00.0 eth0: addr 00:1f:bc:0e:1e:3d
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0 eth1: addr 00:1f:bc:0e:1e:3e
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc100 irq 221
ata2: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc180 irq 221
ata3: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc200 irq 221
ata4: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc280 irq 221
ata5: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc300 irq 221
ata6: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc380 irq 221
scsi 0:0:0:0: Direct-Access Generic Flash HS-CF 4.49 PQ: 0 ANSI: 0
scsi 0:0:0:1: Direct-Access Generic Flash HS-COMBO 4.49 PQ: 0 ANSI: 0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: Integral SATAII and USB SSD, 02.10104, max UDMA/133
ata1.00: 498935040 sectors, multi 1: LBA48
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Integral SATAII 02.1 PQ: 0 ANSI: 5
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: Integral SATAII and USB SSD, 02.10104, max UDMA/133
ata2.00: 498935040 sectors, multi 1: LBA48
ata2.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Integral SATAII 02.1 PQ: 0 ANSI: 5
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: Integral SATAII and USB SSD, 02.10104, max UDMA/133
ata3.00: 498935040 sectors, multi 1: LBA48
ata3.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Integral SATAII 02.1 PQ: 0 ANSI: 5
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: Integral SATAII and USB SSD, 02.10104, max UDMA/133
ata4.00: 498935040 sectors, multi 1: LBA48
ata4.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Integral SATAII 02.1 PQ: 0 ANSI: 5
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: Optiarc DVD RW AD-7280S, 1.01, max UDMA/100
ata5.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7280S 1.01 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
wmi: Mapper loaded
sd 1:0:0:0: [sdc] 498935040 512-byte logical blocks: (255 GB/237 GiB)
sd 3:0:0:0: [sde] 498935040 512-byte logical blocks: (255 GB/237 GiB)
sd 4:0:0:0: [sdf] 498935040 512-byte logical blocks: (255 GB/237 GiB)
sd 2:0:0:0: [sdd] 498935040 512-byte logical blocks: (255 GB/237 GiB)
sd 3:0:0:0: [sde] Write Protect is off
sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdf] Write Protect is off
sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde4
sd 3:0:0:0: [sde] Attached SCSI disk
sdf: sdf1 sdf9
sdd: sdd1 sdd9
sd 4:0:0:0: [sdf] Attached SCSI disk
sd 2:0:0:0: [sdd] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:1: [sdb] Attached SCSI removable disk
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc4
sd 1:0:0:0: [sdc] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
md: bind<sde1>
md: bind<sde2>
md: bind<sdc1>
md: raid1 personality registered for level 1
md/raid1:md127: active with 2 out of 2 mirrors
md127: detected capacity change from 0 to 536842240
md127: unknown partition table
md: bind<sdc2>
md/raid1:md126: active with 2 out of 2 mirrors
md126: detected capacity change from 0 to 34359664640
md126: unknown partition table
dracut: Assembling MD RAID arrays
EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null)
dracut: Remounting /dev/disk/by-uuid/ea61c60b-8e91-4cc3-ab17-f6b5097f1e87 with -o noatime,ro
EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/md126
md127: detected capacity change from 536842240 to 0
md: md127 stopped.
md: unbind<sdc1>
md: export_rdev(sdc1)
md: unbind<sde1>
md: export_rdev(sde1)
md: md127 stopped.
dracut: Switching root
udev: starting version 147
xen: registering gsi 29 triggering 0 polarity 1
Already setup the GSI :29
WARNING! power/level is deprecated; use power/control instead
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 xhci_hcd
usb usb9: SerialNumber: 0000:0f:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 xhci_hcd
usb usb10: SerialNumber: 0000:0f:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
usb 9-1: new low-speed USB device number 2 using xhci_hcd
usb 9-1: New USB device found, idVendor=045e, idProduct=00dd
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-1: Product: Comfort Curve Keyboard 2000
usb 9-1: Manufacturer: Microsoft
usb 9-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 9-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/0000:0f:00.0/usb9/9-1/9-1:1.0/input/input10
hid-generic 0003:045E:00DD.0009: input,hidraw8: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:0f:00.0-1/input0
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/0000:0f:00.0/usb9/9-1/9-1:1.1/input/input11
hid-generic 0003:045E:00DD.000A: input,hidraw9: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:0f:00.0-1/input1
usb 9-2: new full-speed USB device number 3 using xhci_hcd
usb 9-2: New USB device found, idVendor=1532, idProduct=0017
usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-2: Product: Razer Imperator
usb 9-2: Manufacturer: Razer
xen: registering gsi 22 triggering 0 polarity 1
xen: --> pirq=22 -> irq=22 (gsi=22)
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
xen: registering gsi 34 triggering 0 polarity 1
xen: --> pirq=34 -> irq=34 (gsi=34)
hda-intel 0000:0e:00.1: Handle VGA-switcheroo audio client
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:00.0/0000:0e:00.1/sound/card1/input20
xen: registering gsi 34 triggering 0 polarity 1
Already setup the GSI :34
input: HDA Creative Line as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input21
input: HDA Creative Mic as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input22
input: HDA Creative Front Headphone as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input23
input: HDA Creative Line Out Side as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input24
input: HDA Creative Line Out CLFE as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input25
input: HDA Creative Line Out Surround as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input26
input: HDA Creative Line Out Front as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input27
xen: registering gsi 37 triggering 0 polarity 1
xen: --> pirq=37 -> irq=37 (gsi=37)
hda_intel: Disabling MSI
hda-intel 0000:08:00.1: Handle VGA-switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:00.0/0000:08:00.1/sound/card3/input28
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:00.0/0000:08:00.1/sound/card3/input29
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:00.0/0000:08:00.1/sound/card3/input30
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:00.0/0000:08:00.1/sound/card3/input31
xen: registering gsi 38 triggering 0 polarity 1
xen: --> pirq=38 -> irq=38 (gsi=38)
hda_intel: Disabling MSI
hda-intel 0000:07:00.1: Handle VGA-switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:02.0/0000:07:00.1/sound/card4/input32
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:02.0/0000:07:00.1/sound/card4/input33
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:02.0/0000:07:00.1/sound/card4/input34
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:02.0/0000:07:00.1/sound/card4/input35
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:fe:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED)
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20130117/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
cm109: Keymap for Komunikate KIP1000 phone loaded
input: CM109 USB driver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1.2/2-6.1.2:1.3/input/input36
usbcore: registered new interface driver cm109
cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:1: Attached scsi generic sg1 type 0
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: Attached scsi generic sg5 type 0
sr 5:0:0:0: Attached scsi generic sg6 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input37
microcode: CPU0 sig=0x206c0, pf=0x1, revision=0x0
md: bind<sdc1>
microcode: CPU1 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU2 sig=0x206c0, pf=0x1, revision=0x0
md: bind<sde1>
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 536842240
microcode: CPU3 sig=0x206c0, pf=0x1, revision=0x0
md0: unknown partition table
microcode: CPU4 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU5 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU6 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU7 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU8 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU9 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU10 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU11 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU12 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU13 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU14 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU15 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU16 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU17 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU18 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU19 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU20 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU21 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU22 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU23 sig=0x206c0, pf=0x1, revision=0x0
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:02.0/0000:0f:00.0/usb9/9-2/9-2:1.0/input/input38
hid-generic 0003:1532:0017.000B: input,hidraw10: USB HID v1.11 Mouse [Razer Razer Imperator] on usb-0000:0f:00.0-2/input0
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:02.0/0000:0f:00.0/usb9/9-2/9-2:1.1/input/input39
hid-generic 0003:1532:0017.000C: input,hidraw11: USB HID v1.11 Keyboard [Razer Razer Imperator] on usb-0000:0f:00.0-2/input1
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
spl: module verification failed: signature and/or required key missing - tainting kernel
SPL: Loaded module v0.6.1-1
zunicode: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Event-channel device installed.
pciback 0000:08:00.0: seizing device
pciback 0000:07:00.0: seizing device
pciback 0000:07:00.0: enabling device (0000 -> 0003)
xen: registering gsi 39 triggering 0 polarity 1
xen: --> pirq=39 -> irq=39 (gsi=39)
pciback 0000:08:00.0: enabling device (0000 -> 0003)
xen: registering gsi 30 triggering 0 polarity 1
xen: --> pirq=30 -> irq=30 (gsi=30)
xen-pciback: backend is vpci
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 24 device(s) ...
Adding 2097148k swap on /dev/zram0. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram1. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram2. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram3. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram4. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram5. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram6. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram7. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram8. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram9. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram10. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram11. Priority:100 extents:1 across:2097148k SS
EXT4-fs (md126): re-mounted. Opts: (null)
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
ZFS: Loaded module v0.6.1-1, ZFS pool version 5000, ZFS filesystem version 5
SPL: using hostid 0x00000000
zd0: p1
zd16: p1
zd32: p1
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
bonding: bond0: Adding slave eth0.
sky2 0000:02:00.0 eth0: enabling interface
bonding: bond0: enslaving eth0 as an active interface with an up link.
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bonding: bond0: Adding slave eth1.
sky2 0000:03:00.0 eth1: enabling interface
bonding: bond0: enslaving eth1 as an active interface with an up link.
Bridge firewalling registered
device bond0 entered promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
br0: port 1(bond0) entered forwarding state
br0: port 1(bond0) entered forwarding state
sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
sky2 0000:03:00.0 eth1: Link is up at 1000 Mbps, full duplex, flow control both
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
f71882fg: Found f71808e chip at 0xa10, revision 49
f71882fg f71882fg.2576: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.2576: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 1
f71882fg f71882fg.2576: Fan: 2 is in duty-cycle mode
f71882fg f71882fg.2576: Fan: 3 is in duty-cycle mode
uhci_hcd 0000:00:1a.0: remove, state 4
usb usb3: USB disconnect, device number 1
uhci_hcd 0000:00:1a.0: USB bus 3 deregistered
pciback 0000:00:1a.0: seizing device
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
uhci_hcd 0000:00:1a.1: remove, state 1
usb usb4: USB disconnect, device number 1
usb 4-1: USB disconnect, device number 2
usb 4-2: USB disconnect, device number 3
uhci_hcd 0000:00:1a.1: USB bus 4 deregistered
pciback 0000:00:1a.1: seizing device
xen: registering gsi 21 triggering 0 polarity 1
Already setup the GSI :21
uhci_hcd 0000:00:1d.2: remove, state 4
usb usb8: USB disconnect, device number 1
uhci_hcd 0000:00:1d.2: USB bus 8 deregistered
pciback 0000:00:1d.2: seizing device
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
ehci-pci 0000:00:1d.7: remove, state 1
usb usb2: USB disconnect, device number 1
usb 2-6: USB disconnect, device number 2
usb 2-6.1: USB disconnect, device number 3
usb 2-6.1.1: USB disconnect, device number 6
usb 2-6.1.2: USB disconnect, device number 7
cm109 2-6.1.2:1.3: cm109_toggle_buzzer_sync: usb_control_msg() failed -19
usb 2-6.2: USB disconnect, device number 4
usb 2-6.3: USB disconnect, device number 5
ehci-pci 0000:00:1d.7: USB bus 2 deregistered
pciback 0000:00:1d.7: seizing device
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
pciback 0000:07:00.1: seizing device
xen: registering gsi 38 triggering 0 polarity 1
Already setup the GSI :38
pciback 0000:08:00.1: seizing device
xen: registering gsi 37 triggering 0 polarity 1
Already setup the GSI :37
pciback 0000:0d:00.0: seizing device
xen: registering gsi 34 triggering 0 polarity 1
Already setup the GSI :34
vgaarb: device changed decodes: PCI:0000:0e:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:0e:00.0 to PCI:0000:07:00.0
fuse init (API version 7.21)
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
device vif1.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
device vif1.0-emu entered promiscuous mode
br0: port 3(vif1.0-emu) entered forwarding state
br0: port 3(vif1.0-emu) entered forwarding state
xen-pciback: vpci: 0000:00:1a.1: assign to virtual slot 0
xen-pciback: vpci: 0000:0d:00.0: assign to virtual slot 1
xen-pciback: vpci: 0000:08:00.0: assign to virtual slot 2
xen-pciback: vpci: 0000:08:00.1: assign to virtual slot 2 func 1
br0: port 3(vif1.0-emu) entered disabled state
device vif1.0-emu left promiscuous mode
br0: port 3(vif1.0-emu) entered disabled state
xen-blkback:ring-ref 16383, event-channel 14, protocol 1 (unspecified, assuming native)
IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
br0: port 2(vif1.0) entered forwarding state
br0: port 2(vif1.0) entered forwarding state
br0: port 2(vif1.0) entered disabled state
device vif1.0 left promiscuous mode
br0: port 2(vif1.0) entered disabled state
[-- Attachment #3: dmesg.log.8GB --]
[-- Type: text/plain, Size: 76218 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.9.9-2.el6xen.x86_64 (root@normandy) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Tue Jul 16 15:52:11 BST 2013
Command line: ro root=UUID=ea61c60b-8e91-4cc3-ab17-f6b5097f1e87 rd_MD_UUID=26fb9899:f3adb40f:b22e37a7:5f2db70a rd_MD_UUID=fbf20e02:97089c2c:1d0e1847:9e192fe8 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=uk selinux=0 elevator=deadline intel_iommu=on elevator=deadline iomem=relaxed video=DVI-I-1:edid/1920x2400 video=DVI-I-2:1920x2400 video=DIN-1:d
Freeing 9d-100 pfn range: 99 pages freed
1-1 mapping on 9d->100
Freeing 3f790-100000 pfn range: 788592 pages freed
1-1 mapping on 3f790->100000
Released 788691 pages of unused memory
Set 788691 page(s) to 1-1 mapping
Populating bcf912-c901e5 pfn range: 788691 pages added
e820: BIOS-provided physical RAM map:
Xen: [mem 0x0000000000000000-0x000000000009cfff] usable
Xen: [mem 0x000000000009d400-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x000000003f78ffff] usable
Xen: [mem 0x000000003f790000-0x000000003f79dfff] ACPI data
Xen: [mem 0x000000003f79e000-0x000000003f7cffff] ACPI NVS
Xen: [mem 0x000000003f7d0000-0x000000003f7dffff] reserved
Xen: [mem 0x000000003f7e7000-0x000000003fffffff] reserved
Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Xen: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
Xen: [mem 0x0000000100000000-0x0000000cbfffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./EVGA Classified SR-2, BIOS 080016 04/24/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xcc0000 max_arch_pfn = 0x400000000
e820: last_pfn = 0x3f790 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000096000] 96000 size 28672
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0xc8fe00000-0xc8fffffff]
[mem 0xc8fe00000-0xc8fffffff] page 4k
BRK [0x01bc0000, 0x01bc0fff] PGTABLE
BRK [0x01bc1000, 0x01bc1fff] PGTABLE
init_memory_mapping: [mem 0xc8c000000-0xc8fdfffff]
[mem 0xc8c000000-0xc8fdfffff] page 4k
BRK [0x01bc2000, 0x01bc2fff] PGTABLE
BRK [0x01bc3000, 0x01bc3fff] PGTABLE
BRK [0x01bc4000, 0x01bc4fff] PGTABLE
init_memory_mapping: [mem 0xc80000000-0xc8bffffff]
[mem 0xc80000000-0xc8bffffff] page 4k
init_memory_mapping: [mem 0x00100000-0x3f78ffff]
[mem 0x00100000-0x3f78ffff] page 4k
init_memory_mapping: [mem 0x100000000-0xc7fffffff]
[mem 0x100000000-0xc7fffffff] page 4k
init_memory_mapping: [mem 0xc90000000-0xcbfffffff]
[mem 0xc90000000-0xcbfffffff] page 4k
RAMDISK: [mem 0x01f70000-0x061acfff]
ACPI: RSDP 00000000000f9f70 00024 (v02 ACPIAM)
ACPI: XSDT 000000003f790100 00064 (v01 042413 XSDT1438 20130424 MSFT 00000097)
ACPI: FACP 000000003f790290 000F4 (v04 042413 FACP1438 20130424 MSFT 00000097)
ACPI: DSDT 000000003f7904f0 058A3 (v02 1W555 1W555A58 00000A58 INTL 20051117)
ACPI: FACS 000000003f79e000 00040
ACPI: APIC 000000003f790390 00118 (v02 042413 APIC1438 20130424 MSFT 00000097)
ACPI: MCFG 000000003f7904b0 0003C (v01 042413 OEMMCFG 20130424 MSFT 00000097)
ACPI: OEMB 000000003f79e040 00082 (v01 042413 OEMB1438 20130424 MSFT 00000097)
ACPI: SRAT 000000003f79a4f0 00250 (v02 042413 OEMSRAT 00000001 INTL 00000001)
ACPI: HPET 000000003f79a740 00038 (v01 042413 OEMHPET 20130424 MSFT 00000097)
ACPI: XMAR 000000003f79e0d0 00120 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 000000003f7a4c70 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
NUMA turned off
Faking a node at [mem 0x0000000000000000-0x0000000cbfffffff]
Initmem setup node 0 [mem 0x00000000-0xcbfffffff]
NODE_DATA [mem 0xc901be000-0xc901e4fff]
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0xcbfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x3f78ffff]
node 0: [mem 0x100000000-0xcbfffffff]
On node 0 totalpages: 12580652
DMA zone: 56 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 3499 pages used for memmap
DMA32 zone: 255888 pages, LIFO batch:31
Normal zone: 168448 pages used for memmap
Normal zone: 12320768 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 24 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 0000000000100000
PM: Registered nosave memory: 000000003f790000 - 000000003f79e000
PM: Registered nosave memory: 000000003f79e000 - 000000003f7d0000
PM: Registered nosave memory: 000000003f7d0000 - 000000003f7e0000
PM: Registered nosave memory: 000000003f7e0000 - 000000003f7e7000
PM: Registered nosave memory: 000000003f7e7000 - 0000000040000000
PM: Registered nosave memory: 0000000040000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
e820: [mem 0x40000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on Xen
Xen version: 4.3.0 (preserve-AD)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:24 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880c83c00000 s84032 r8192 d22464 u131072
pcpu-alloc: s84032 r8192 d22464 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12408627
Policy zone: Normal
Kernel command line: ro root=UUID=ea61c60b-8e91-4cc3-ab17-f6b5097f1e87 rd_MD_UUID=26fb9899:f3adb40f:b22e37a7:5f2db70a rd_MD_UUID=fbf20e02:97089c2c:1d0e1847:9e192fe8 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=uk selinux=0 elevator=deadline intel_iommu=on elevator=deadline iomem=relaxed video=DVI-I-1:edid/1920x2400 video=DVI-I-2:1920x2400 video=DIN-1:d
Intel-IOMMU: enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
software IO TLB [mem 0xc55800000-0xc59800000] (64MB) mapped at [ffff880c55800000-ffff880c597fffff]
Memory: 48504280k/53477376k available (5525k kernel code, 3154768k absent, 1818328k reserved, 2610k data, 1732k init)
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=24.
NR_IRQS:4352 nr_irqs:1280 16
xen: sci override: global_irq=20 trigger=0 polarity=1
xen: registering gsi 20 triggering 0 polarity 1
xen: --> pirq=20 -> irq=9 (gsi=9)
xen: acpi sci 9
xen: --> pirq=1 -> irq=1 (gsi=1)
xen: --> pirq=2 -> irq=2 (gsi=2)
xen: --> pirq=3 -> irq=3 (gsi=3)
xen: --> pirq=4 -> irq=4 (gsi=4)
xen: --> pirq=5 -> irq=5 (gsi=5)
xen: --> pirq=6 -> irq=6 (gsi=6)
xen: --> pirq=7 -> irq=7 (gsi=7)
xen: --> pirq=8 -> irq=8 (gsi=8)
xen: --> pirq=10 -> irq=10 (gsi=10)
xen: --> pirq=11 -> irq=11 (gsi=11)
xen: --> pirq=12 -> irq=12 (gsi=12)
xen: --> pirq=13 -> irq=13 (gsi=13)
xen: --> pirq=14 -> irq=14 (gsi=14)
xen: --> pirq=15 -> irq=15 (gsi=15)
Console: colour VGA+ 80x25
console [tty0] enabled
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
tsc: Detected 3321.754 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6643.50 BogoMIPS (lpj=3321754)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20130117
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 21258 entries in 84 pages
Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
installing Xen timer for CPU 1
installing Xen timer for CPU 2
installing Xen timer for CPU 3
installing Xen timer for CPU 4
installing Xen timer for CPU 5
installing Xen timer for CPU 6
installing Xen timer for CPU 7
installing Xen timer for CPU 8
installing Xen timer for CPU 9
installing Xen timer for CPU 10
installing Xen timer for CPU 11
installing Xen timer for CPU 12
installing Xen timer for CPU 13
installing Xen timer for CPU 14
installing Xen timer for CPU 15
installing Xen timer for CPU 16
installing Xen timer for CPU 17
installing Xen timer for CPU 18
installing Xen timer for CPU 19
installing Xen timer for CPU 20
installing Xen timer for CPU 21
installing Xen timer for CPU 22
installing Xen timer for CPU 23
Brought up 24 CPUs
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x3f79e000-0x3f7cffff] (204800 bytes)
Grant tables using version 2 layout.
Grant table initialized
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000003f79e1f0 053DC (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 053DC (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 000000003f7a35d0 00C88 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00C88 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: SSDT 000000003f7a4260 00A0A (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00A0A (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 10: [mem 0xfec8a000-0xfec8afff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0x9980-0x999f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0x9a00-0x9a1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0x9a80-0x9a9f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xf3df8000-0xf3df83ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf3df4000-0xf3df7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0x9b00-0x9b1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0x9b80-0x9b9f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0x9c00-0x9c1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xf3dfa000-0xf3dfa3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x9d00-0x9d07]
pci 0000:00:1f.2: reg 14: [io 0x9f00-0x9f03]
pci 0000:00:1f.2: reg 18: [io 0x9e80-0x9e87]
pci 0000:00:1f.2: reg 1c: [io 0x9e00-0x9e03]
pci 0000:00:1f.2: reg 20: [io 0x9d80-0x9d9f]
pci 0000:00:1f.2: reg 24: [mem 0xf3dfc000-0xf3dfc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf3dfe000-0xf3dfe0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:0f:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:0f:00.0: reg 10: [mem 0xfbefe000-0xfbefffff 64bit]
pci 0000:0f:00.0: PME# supported from D0 D3hot
pci 0000:00:02.0: PCI bridge to [bus 0f]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:09:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 09-0e]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xd7e00000-0xdfffffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0a:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:01.0: [10de:05b1] type 01 class 0x060400
pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:02.0: [10de:05b1] type 01 class 0x060400
pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a-0e]
pci 0000:09:00.0: bridge window [io 0xe000-0xefff]
pci 0000:09:00.0: bridge window [mem 0xd7e00000-0xdfffffff]
pci 0000:09:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0e:00.0: [1002:9442] type 00 class 0x030000
pci 0000:0e:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0e:00.0: reg 18: [mem 0xd8000000-0xd800ffff 64bit]
pci 0000:0e:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:0e:00.0: reg 30: [mem 0xd7fe0000-0xd7ffffff pref]
pci 0000:0e:00.0: supports D1 D2
pci 0000:0e:00.1: [1002:aa30] type 00 class 0x040300
pci 0000:0e:00.1: reg 10: [mem 0xdc000000-0xdc003fff 64bit]
pci 0000:0e:00.1: supports D1 D2
pci 0000:0a:00.0: PCI bridge to [bus 0e]
pci 0000:0a:00.0: bridge window [io 0xe000-0xefff]
pci 0000:0a:00.0: bridge window [mem 0xd7f00000-0xdfffffff]
pci 0000:0a:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0c:00.0: [1102:7006] type 01 class 0x060400
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:0a:01.0: PCI bridge to [bus 0c-0d]
pci 0000:0a:01.0: bridge window [mem 0xd7e00000-0xd7efffff]
pci 0000:0d:00.0: [1102:0009] type 00 class 0x040300
pci 0000:0d:00.0: reg 10: [mem 0xd7efc000-0xd7efffff]
pci 0000:0d:00.0: supports D1 D2
pci 0000:0c:00.0: PCI bridge to [bus 0d]
pci 0000:0c:00.0: bridge window [mem 0xd7e00000-0xd7efffff]
pci 0000:0a:02.0: PCI bridge to [bus 0b]
pci 0000:05:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 05-08]
pci 0000:00:07.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xf4000000-0xfbdfffff]
pci 0000:00:07.0: bridge window [mem 0xa8000000-0xbfffffff 64bit pref]
pci 0000:06:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:02.0: [10de:05b1] type 01 class 0x060400
pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06-08]
pci 0000:05:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:05:00.0: bridge window [mem 0xf4000000-0xfbdfffff]
pci 0000:05:00.0: bridge window [mem 0xa8000000-0xbfffffff 64bit pref]
pci 0000:08:00.0: [10de:06d8] type 00 class 0x030000
pci 0000:08:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
pci 0000:08:00.0: reg 14: [mem 0xb8000000-0xbfffffff 64bit pref]
pci 0000:08:00.0: reg 1c: [mem 0xb4000000-0xb7ffffff 64bit pref]
pci 0000:08:00.0: reg 24: [io 0xdf80-0xdfff]
pci 0000:08:00.0: reg 30: [mem 0xfbd00000-0xfbd7ffff pref]
pci 0000:08:00.1: [10de:0be5] type 00 class 0x040300
pci 0000:08:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff]
pci 0000:06:00.0: PCI bridge to [bus 08]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xf8000000-0xfbdfffff]
pci 0000:06:00.0: bridge window [mem 0xb4000000-0xbfffffff 64bit pref]
pci 0000:07:00.0: [10de:06d9] type 00 class 0x030000
pci 0000:07:00.0: reg 10: [mem 0xf4000000-0xf5ffffff]
pci 0000:07:00.0: reg 14: [mem 0xa8000000-0xafffffff 64bit pref]
pci 0000:07:00.0: reg 1c: [mem 0xb0000000-0xb3ffffff 64bit pref]
pci 0000:07:00.0: reg 24: [io 0xcf80-0xcfff]
pci 0000:07:00.0: reg 30: [mem 0xf7f00000-0xf7f7ffff pref]
pci 0000:07:00.1: [10de:0be5] type 00 class 0x040300
pci 0000:07:00.1: reg 10: [mem 0xf7ffc000-0xf7ffffff]
pci 0000:06:02.0: PCI bridge to [bus 07]
pci 0000:06:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:02.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:06:02.0: bridge window [mem 0xa8000000-0xb3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:03:00.0: [11ab:4380] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [mem 0xf3fdc000-0xf3fdffff 64bit]
pci 0000:03:00.0: reg 18: [io 0xbf00-0xbfff]
pci 0000:03:00.0: reg 30: [mem 0xf3fe0000-0xf3ffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.2: bridge window [mem 0xf3f00000-0xf3ffffff]
pci 0000:02:00.0: [11ab:4380] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0xf3edc000-0xf3edffff 64bit]
pci 0000:02:00.0: reg 18: [io 0xaf00-0xafff]
pci 0000:02:00.0: reg 30: [mem 0xf3ee0000-0xf3efffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xf3e00000-0xf3efffff]
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x40000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
ACPI: No dock devices found.
xen/balloon: Initialising balloon driver.
xen-balloon: Initialising balloon driver.
xen/balloon: Xen selfballooning driver disabled for domain0.
vgaarb: device added: PCI:0000:0e:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:08:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
vgaarb: bridge control possible 0000:08:00.0
vgaarb: bridge control possible 0000:0e:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
PCI: root bus fe: using default resources
PCI: Probing PCI hardware (bus fe)
PCI host bridge to bus 0000:fe
pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:ff:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:ff:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0x3f790000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
xen: registering gsi 8 triggering 1 polarity 0
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
xen: registering gsi 13 triggering 1 polarity 0
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0a00-0x0adf] has been reserved
system 00:05: [io 0x0ae0-0x0aef] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0x00100000-0x3fffffff] could not be reserved
system 00:0a: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
PM-Timer failed consistency check (0x0xffffff) - aborting.
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:02.0: PCI bridge to [bus 0f]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:0a:00.0: PCI bridge to [bus 0e]
pci 0000:0a:00.0: bridge window [io 0xe000-0xefff]
pci 0000:0a:00.0: bridge window [mem 0xd7f00000-0xdfffffff]
pci 0000:0a:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0c:00.0: PCI bridge to [bus 0d]
pci 0000:0c:00.0: bridge window [mem 0xd7e00000-0xd7efffff]
pci 0000:0a:01.0: PCI bridge to [bus 0c-0d]
pci 0000:0a:01.0: bridge window [mem 0xd7e00000-0xd7efffff]
pci 0000:0a:02.0: PCI bridge to [bus 0b]
pci 0000:09:00.0: PCI bridge to [bus 0a-0e]
pci 0000:09:00.0: bridge window [io 0xe000-0xefff]
pci 0000:09:00.0: bridge window [mem 0xd7e00000-0xdfffffff]
pci 0000:09:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 09-0e]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xd7e00000-0xdfffffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 08]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xf8000000-0xfbdfffff]
pci 0000:06:00.0: bridge window [mem 0xb4000000-0xbfffffff 64bit pref]
pci 0000:06:02.0: PCI bridge to [bus 07]
pci 0000:06:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:02.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:06:02.0: bridge window [mem 0xa8000000-0xb3ffffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06-08]
pci 0000:05:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:05:00.0: bridge window [mem 0xf4000000-0xfbdfffff]
pci 0000:05:00.0: bridge window [mem 0xa8000000-0xbfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 05-08]
pci 0000:00:07.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xf4000000-0xfbdfffff]
pci 0000:00:07.0: bridge window [mem 0xa8000000-0xbfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.2: bridge window [mem 0xf3f00000-0xf3ffffff]
pci 0000:00:1c.2: bridge window [mem 0x40400000-0x405fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xf3e00000-0xf3efffff]
pci 0000:00:1c.4: bridge window [mem 0x40600000-0x407fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: enabling device (0104 -> 0107)
xen: registering gsi 17 triggering 0 polarity 1
xen: --> pirq=17 -> irq=17 (gsi=17)
xen: registering gsi 18 triggering 0 polarity 1
xen: --> pirq=18 -> irq=18 (gsi=18)
xen: registering gsi 17 triggering 0 polarity 1
Already setup the GSI :17
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x40000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:0f: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
pci_bus 0000:09: resource 1 [mem 0xd7e00000-0xdfffffff]
pci_bus 0000:09: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xd7e00000-0xdfffffff]
pci_bus 0000:0a: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:0e: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0e: resource 1 [mem 0xd7f00000-0xdfffffff]
pci_bus 0000:0e: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xd7e00000-0xd7efffff]
pci_bus 0000:0d: resource 1 [mem 0xd7e00000-0xd7efffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf4000000-0xfbdfffff]
pci_bus 0000:05: resource 2 [mem 0xa8000000-0xbfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xf4000000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xa8000000-0xbfffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xf8000000-0xfbdfffff]
pci_bus 0000:08: resource 2 [mem 0xb4000000-0xbfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 2 [mem 0xa8000000-0xb3ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0x40000000-0x401fffff]
pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf3f00000-0xf3ffffff]
pci_bus 0000:03: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf3e00000-0xf3efffff]
pci_bus 0000:02: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0x40000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
xen: registering gsi 16 triggering 0 polarity 1
xen: --> pirq=16 -> irq=16 (gsi=16)
xen: registering gsi 21 triggering 0 polarity 1
xen: --> pirq=21 -> irq=21 (gsi=21)
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
xen: registering gsi 23 triggering 0 polarity 1
xen: --> pirq=23 -> irq=23 (gsi=23)
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
xen: registering gsi 29 triggering 0 polarity 1
xen: --> pirq=29 -> irq=29 (gsi=29)
pci 0000:0e:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 67828k freed
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1374702399.936:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcieport 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0e:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:0a:01.0: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:0a:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pcieport 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:06:02.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
intel_idle: intel_idle yielding to none
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
Monitor-Mwait will be used to enter C-3 state
Warning: Processor Platform Limit not supported.
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf3df8000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3dfa000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009980
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xen: registering gsi 21 triggering 0 polarity 1
Already setup the GSI :21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009a00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009a80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009b00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009b80
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009c00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 37cced82f1f9fd38d8ceb662cc0603433dd14ab8'
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:02: setting system clock to 2013-07-24 21:46:39 UTC (1374702399)
Freeing unused kernel memory: 1732k freed
dracut: dracut-004-53.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
udevd (200): /proc/200/oom_adj is deprecated, please use /proc/200/oom_score_adj instead.
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
xen: registering gsi 24 triggering 0 polarity 1
xen: --> pirq=24 -> irq=24 (gsi=24)
[drm] initializing kernel modesetting (RV770 0x1002:0x9442 0x174B:0xE810).
[drm] register mmio base: 0xD8000000
[drm] register mmio size: 65536
ATOM BIOS: Wekiva
radeon 0000:0e:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:0e:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 24286930 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading RV770 Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:0e:00.0: WB enabled
radeon 0000:0e:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880c47d4cc00
radeon 0000:0e:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880c47d4cc0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:0e:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] DIN-1
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I-2
[drm] HPD2
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_KLDSCP_LVTMA
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
parse error at position 4 in video mode 'edid/1920x2400'
[drm] forcing DIN-1 connector OFF
usb 2-6: new high-speed USB device number 2 using ehci-pci
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 36864000
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: radeondrmfb (fb0) is primary device
usb 2-6: New USB device found, idVendor=0424, idProduct=2504
usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 3 ports detected
usb 4-1: new low-speed USB device number 2 using uhci_hcd
usb 4-1: New USB device found, idVendor=045e, idProduct=00dd
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Comfort Curve Keyboard 2000
usb 4-1: Manufacturer: Microsoft
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
hid-generic 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.1-1/input0
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input3
hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.1-1/input1
usb 4-2: new full-speed USB device number 3 using uhci_hcd
usb 4-2: New USB device found, idVendor=1532, idProduct=002f
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Razer Imperator
usb 4-2: Manufacturer: Razer
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
hid-generic 0003:1532:002F.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Imperator] on usb-0000:00:1a.1-2/input0
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input5
hid-generic 0003:1532:002F.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Imperator] on usb-0000:00:1a.1-2/input1
Console: switching to colour frame buffer device 240x150
usb 2-6.1: new high-speed USB device number 3 using ehci-pci
usb 2-6.1: New USB device found, idVendor=0424, idProduct=2503
usb 2-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-6.1:1.0: USB hub found
hub 2-6.1:1.0: 3 ports detected
usb 2-6.2: new low-speed USB device number 4 using ehci-pci
usb 2-6.2: New USB device found, idVendor=045e, idProduct=0780
usb 2-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6.2: Product: Comfort Curve Keyboard 3000
usb 2-6.2: Manufacturer: Microsoft
input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input6
hid-generic 0003:045E:0780.0005: input,hidraw4: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:1d.7-6.2/input0
input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.1/input/input7
hid-generic 0003:045E:0780.0006: input,hidraw5: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:1d.7-6.2/input1
usb 2-6.3: new full-speed USB device number 5 using ehci-pci
usb 2-6.3: New USB device found, idVendor=1532, idProduct=002f
usb 2-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6.3: Product: Razer Imperator
usb 2-6.3: Manufacturer: Razer
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.3/2-6.3:1.0/input/input8
hid-generic 0003:1532:002F.0007: input,hidraw6: USB HID v1.11 Mouse [Razer Razer Imperator] on usb-0000:00:1d.7-6.3/input0
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.3/2-6.3:1.1/input/input9
hid-generic 0003:1532:002F.0008: input,hidraw7: USB HID v1.11 Keyboard [Razer Razer Imperator] on usb-0000:00:1d.7-6.3/input1
usb 2-6.1.1: new high-speed USB device number 6 using ehci-pci
radeon 0000:0e:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:0e:00.0: registered panic notifier
[drm] Initialized radeon 2.30.0 20080528 for 0000:0e:00.0 on minor 0
dracut: Starting plymouth daemon
usb 2-6.1.1: New USB device found, idVendor=0424, idProduct=2228
usb 2-6.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6.1.1: Product: Flash Card Reader
usb 2-6.1.1: Manufacturer: Generic
usb 2-6.1.1: SerialNumber: 000022272228
Initializing USB Mass Storage driver...
scsi0 : usb-storage 2-6.1.1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-6.1.2: new full-speed USB device number 7 using ehci-pci
usb 2-6.1.2: New USB device found, idVendor=0d8c, idProduct=000e
usb 2-6.1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-6.1.2: Product: Generic USB Audio Device
dracut: rd_NO_DM: removing DM RAID activation
sky2: driver version 1.30
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
sky2 0000:03:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:03:00.0 eth0: addr 00:1f:bc:0e:1e:3d
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:02:00.0 eth1: addr 00:1f:bc:0e:1e:3e
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc100 irq 221
ata2: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc180 irq 221
ata3: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc200 irq 221
ata4: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc280 irq 221
ata5: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc300 irq 221
ata6: SATA max UDMA/133 abar m2048@0xf3dfc000 port 0xf3dfc380 irq 221
scsi 0:0:0:0: Direct-Access Generic Flash HS-CF 4.49 PQ: 0 ANSI: 0
scsi 0:0:0:1: Direct-Access Generic Flash HS-COMBO 4.49 PQ: 0 ANSI: 0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: Integral SATAII and USB SSD, 02.10104, max UDMA/133
ata1.00: 498935040 sectors, multi 1: LBA48
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Integral SATAII 02.1 PQ: 0 ANSI: 5
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: Integral SATAII and USB SSD, 02.10104, max UDMA/133
ata2.00: 498935040 sectors, multi 1: LBA48
ata2.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Integral SATAII 02.1 PQ: 0 ANSI: 5
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: Integral SATAII and USB SSD, 02.10104, max UDMA/133
ata3.00: 498935040 sectors, multi 1: LBA48
ata3.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Integral SATAII 02.1 PQ: 0 ANSI: 5
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: Integral SATAII and USB SSD, 02.10104, max UDMA/133
ata4.00: 498935040 sectors, multi 1: LBA48
ata4.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Integral SATAII 02.1 PQ: 0 ANSI: 5
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: Optiarc DVD RW AD-7280S, 1.01, max UDMA/100
ata5.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7280S 1.01 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
wmi: Mapper loaded
sd 1:0:0:0: [sdc] 498935040 512-byte logical blocks: (255 GB/237 GiB)
sd 2:0:0:0: [sdd] 498935040 512-byte logical blocks: (255 GB/237 GiB)
sd 3:0:0:0: [sde] 498935040 512-byte logical blocks: (255 GB/237 GiB)
sd 4:0:0:0: [sdf] 498935040 512-byte logical blocks: (255 GB/237 GiB)
sd 3:0:0:0: [sde] Write Protect is off
sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdf] Write Protect is off
sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde4
sd 3:0:0:0: [sde] Attached SCSI disk
sdf: sdf1 sdf9
sdd: sdd1 sdd9
sd 2:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: [sdf] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:1: [sdb] Attached SCSI removable disk
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc4
sd 1:0:0:0: [sdc] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
md: bind<sdc2>
md: bind<sde1>
md: bind<sde2>
md: raid1 personality registered for level 1
md/raid1:md127: active with 2 out of 2 mirrors
md127: detected capacity change from 0 to 34359664640
md127: unknown partition table
md: bind<sdc1>
md/raid1:md126: active with 2 out of 2 mirrors
md126: detected capacity change from 0 to 536842240
md126: unknown partition table
dracut: Assembling MD RAID arrays
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
dracut: Remounting /dev/disk/by-uuid/ea61c60b-8e91-4cc3-ab17-f6b5097f1e87 with -o noatime,ro
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/md127
md126: detected capacity change from 536842240 to 0
md: md126 stopped.
md: unbind<sdc1>
md: export_rdev(sdc1)
md: unbind<sde1>
md: export_rdev(sde1)
dracut: Switching root
udev: starting version 147
xen: registering gsi 29 triggering 0 polarity 1
Already setup the GSI :29
WARNING! power/level is deprecated; use power/control instead
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 xhci_hcd
usb usb9: SerialNumber: 0000:0f:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.9.9-2.el6xen.x86_64 xhci_hcd
usb usb10: SerialNumber: 0000:0f:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
usb 9-1: new low-speed USB device number 2 using xhci_hcd
usb 9-1: New USB device found, idVendor=045e, idProduct=00dd
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-1: Product: Comfort Curve Keyboard 2000
usb 9-1: Manufacturer: Microsoft
usb 9-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 9-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/0000:0f:00.0/usb9/9-1/9-1:1.0/input/input10
hid-generic 0003:045E:00DD.0009: input,hidraw8: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:0f:00.0-1/input0
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/0000:0f:00.0/usb9/9-1/9-1:1.1/input/input11
hid-generic 0003:045E:00DD.000A: input,hidraw9: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:0f:00.0-1/input1
usb 9-2: new full-speed USB device number 3 using xhci_hcd
usb 9-2: New USB device found, idVendor=1532, idProduct=0017
usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-2: Product: Razer Imperator
usb 9-2: Manufacturer: Razer
xen: registering gsi 22 triggering 0 polarity 1
xen: --> pirq=22 -> irq=22 (gsi=22)
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
xen: registering gsi 34 triggering 0 polarity 1
xen: --> pirq=34 -> irq=34 (gsi=34)
hda-intel 0000:0e:00.1: Handle VGA-switcheroo audio client
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:00.0/0000:0e:00.1/sound/card1/input20
xen: registering gsi 34 triggering 0 polarity 1
Already setup the GSI :34
input: HDA Creative Line as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input21
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:02.0/0000:0f:00.0/usb9/9-2/9-2:1.0/input/input22
hid-generic 0003:1532:0017.000B: input,hidraw10: USB HID v1.11 Mouse [Razer Razer Imperator] on usb-0000:0f:00.0-2/input0
input: Razer Razer Imperator as /devices/pci0000:00/0000:00:02.0/0000:0f:00.0/usb9/9-2/9-2:1.1/input/input23
hid-generic 0003:1532:0017.000C: input,hidraw11: USB HID v1.11 Keyboard [Razer Razer Imperator] on usb-0000:0f:00.0-2/input1
input: HDA Creative Mic as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input24
input: HDA Creative Front Headphone as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input25
input: HDA Creative Line Out Side as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input26
input: HDA Creative Line Out CLFE as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input27
input: HDA Creative Line Out Surround as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input28
input: HDA Creative Line Out Front as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/0000:0d:00.0/sound/card2/input29
xen: registering gsi 37 triggering 0 polarity 1
xen: --> pirq=37 -> irq=37 (gsi=37)
hda_intel: Disabling MSI
hda-intel 0000:08:00.1: Handle VGA-switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:00.0/0000:08:00.1/sound/card3/input30
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:00.0/0000:08:00.1/sound/card3/input31
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:00.0/0000:08:00.1/sound/card3/input32
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:00.0/0000:08:00.1/sound/card3/input33
xen: registering gsi 38 triggering 0 polarity 1
xen: --> pirq=38 -> irq=38 (gsi=38)
hda_intel: Disabling MSI
hda-intel 0000:07:00.1: Handle VGA-switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:02.0/0000:07:00.1/sound/card4/input34
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:02.0/0000:07:00.1/sound/card4/input35
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:02.0/0000:07:00.1/sound/card4/input36
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/0000:06:02.0/0000:07:00.1/sound/card4/input37
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:fe:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED)
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20130117/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
cm109: Keymap for Komunikate KIP1000 phone loaded
input: CM109 USB driver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1.2/2-6.1.2:1.3/input/input38
usbcore: registered new interface driver cm109
cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:1: Attached scsi generic sg1 type 0
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: Attached scsi generic sg5 type 0
sr 5:0:0:0: Attached scsi generic sg6 type 5
md: bind<sde1>
input: PC Speaker as /devices/platform/pcspkr/input/input39
microcode: CPU0 sig=0x206c0, pf=0x1, revision=0x0
md: bind<sdc1>
microcode: CPU1 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU2 sig=0x206c0, pf=0x1, revision=0x0
md/raid1:md0: active with 2 out of 2 mirrors
microcode: CPU3 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU4 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU5 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU6 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU7 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU8 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU9 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU10 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU11 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU12 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU13 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU14 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU15 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU16 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU17 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU18 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU19 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU20 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU21 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU22 sig=0x206c0, pf=0x1, revision=0x0
microcode: CPU23 sig=0x206c0, pf=0x1, revision=0x0
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
md0: detected capacity change from 0 to 536842240
md0: unknown partition table
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
spl: module verification failed: signature and/or required key missing - tainting kernel
SPL: Loaded module v0.6.1-1
zunicode: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Event-channel device installed.
pciback 0000:08:00.0: seizing device
pciback 0000:07:00.0: seizing device
pciback 0000:07:00.0: enabling device (0000 -> 0003)
xen: registering gsi 39 triggering 0 polarity 1
xen: --> pirq=39 -> irq=39 (gsi=39)
pciback 0000:08:00.0: enabling device (0000 -> 0003)
xen: registering gsi 30 triggering 0 polarity 1
xen: --> pirq=30 -> irq=30 (gsi=30)
xen-pciback: backend is vpci
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 24 device(s) ...
Adding 2097148k swap on /dev/zram0. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram1. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram2. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram3. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram4. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram5. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram6. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram7. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram8. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram9. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram10. Priority:100 extents:1 across:2097148k SS
Adding 2097148k swap on /dev/zram11. Priority:100 extents:1 across:2097148k SS
EXT4-fs (md127): re-mounted. Opts: (null)
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
ZFS: Loaded module v0.6.1-1, ZFS pool version 5000, ZFS filesystem version 5
SPL: using hostid 0x00000000
zd0: p1
zd16: p1
zd32: p1
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
bonding: bond0: Adding slave eth0.
sky2 0000:02:00.0 eth0: enabling interface
bonding: bond0: enslaving eth0 as an active interface with an up link.
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bonding: bond0: Adding slave eth1.
sky2 0000:03:00.0 eth1: enabling interface
bonding: bond0: enslaving eth1 as an active interface with an up link.
Bridge firewalling registered
device bond0 entered promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
br0: port 1(bond0) entered forwarding state
br0: port 1(bond0) entered forwarding state
sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
sky2 0000:03:00.0 eth1: Link is up at 1000 Mbps, full duplex, flow control both
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
f71882fg: Found f71808e chip at 0xa10, revision 49
f71882fg f71882fg.2576: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.2576: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 1
f71882fg f71882fg.2576: Fan: 2 is in duty-cycle mode
f71882fg f71882fg.2576: Fan: 3 is in duty-cycle mode
uhci_hcd 0000:00:1a.0: remove, state 4
usb usb3: USB disconnect, device number 1
uhci_hcd 0000:00:1a.0: USB bus 3 deregistered
pciback 0000:00:1a.0: seizing device
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
uhci_hcd 0000:00:1a.1: remove, state 1
usb usb4: USB disconnect, device number 1
usb 4-1: USB disconnect, device number 2
usb 4-2: USB disconnect, device number 3
uhci_hcd 0000:00:1a.1: USB bus 4 deregistered
pciback 0000:00:1a.1: seizing device
xen: registering gsi 21 triggering 0 polarity 1
Already setup the GSI :21
uhci_hcd 0000:00:1d.2: remove, state 4
usb usb8: USB disconnect, device number 1
uhci_hcd 0000:00:1d.2: USB bus 8 deregistered
pciback 0000:00:1d.2: seizing device
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
ehci-pci 0000:00:1d.7: remove, state 1
usb usb2: USB disconnect, device number 1
usb 2-6: USB disconnect, device number 2
usb 2-6.1: USB disconnect, device number 3
usb 2-6.1.1: USB disconnect, device number 6
usb 2-6.1.2: USB disconnect, device number 7
cm109 2-6.1.2:1.3: cm109_toggle_buzzer_sync: usb_control_msg() failed -19
usb 2-6.2: USB disconnect, device number 4
usb 2-6.3: USB disconnect, device number 5
ehci-pci 0000:00:1d.7: USB bus 2 deregistered
pciback 0000:00:1d.7: seizing device
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
pciback 0000:07:00.1: seizing device
xen: registering gsi 38 triggering 0 polarity 1
Already setup the GSI :38
pciback 0000:08:00.1: seizing device
xen: registering gsi 37 triggering 0 polarity 1
Already setup the GSI :37
pciback 0000:0d:00.0: seizing device
xen: registering gsi 34 triggering 0 polarity 1
Already setup the GSI :34
vgaarb: device changed decodes: PCI:0000:0e:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:0e:00.0 to PCI:0000:07:00.0
fuse init (API version 7.21)
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[-- Attachment #4: edi.2GB --]
[-- Type: text/plain, Size: 622 bytes --]
name="edi"
description="None"
uuid="a57e6840-e9f5-4a14-a822-b2cc662c177f"
memory=2048
maxmem=2048
vcpus=8
cpus="0-7"
on_poweroff="destroy"
on_reboot="restart"
on_crash="destroy"
localtime=1
keymap="en-gb"
builder="hvm"
device_model_override="/usr/lib/xen/bin/qemu-dm"
device_model_version="qemu-xen-traditional"
boot="c"
disk=[ '/dev/zvol/ssd/edi,raw,hda,rw' ]
vif=[ 'mac=00:16:3e:4e:c5:0c,bridge=br0,model=e1000', ]
sdl=0
stdvga=1
vnc=1
audio=0
viridian=1
usb=1
acpi=1
apic=1
pae=1
serial="pty"
gfx_passthru=0
pci = [ '00:1a.1', '0d:00.0', '08:00.0', '08:00.1' ]
xen_platform_pci=1
pci_msitranslate=1
[-- Attachment #5: edi.8GB --]
[-- Type: text/plain, Size: 622 bytes --]
name="edi"
description="None"
uuid="a57e6840-e9f5-4a14-a822-b2cc662c177f"
memory=8192
maxmem=8192
vcpus=8
cpus="0-7"
on_poweroff="destroy"
on_reboot="restart"
on_crash="destroy"
localtime=1
keymap="en-gb"
builder="hvm"
device_model_override="/usr/lib/xen/bin/qemu-dm"
device_model_version="qemu-xen-traditional"
boot="c"
disk=[ '/dev/zvol/ssd/edi,raw,hda,rw' ]
vif=[ 'mac=00:16:3e:4e:c5:0c,bridge=br0,model=e1000', ]
sdl=0
stdvga=1
vnc=1
audio=0
viridian=1
usb=1
acpi=1
apic=1
pae=1
serial="pty"
gfx_passthru=0
pci = [ '00:1a.1', '0d:00.0', '08:00.0', '08:00.1' ]
xen_platform_pci=1
pci_msitranslate=1
[-- Attachment #6: qemu-dm-edi.log.2GB --]
[-- Type: text/plain, Size: 8001 bytes --]
domid: 1
Using file /dev/zvol/ssd/edi in read-write mode
Watching /local/domain/0/device-model/1/logdirty/cmd
Watching /local/domain/0/device-model/1/command
Watching /local/domain/1/cpu
char device redirected to /dev/pts/3
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = a57e6840-e9f5-4a14-a822-b2cc662c177f
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/1/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/a57e6840-e9f5-4a14-a822-b2cc662c177f/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
[xenstore_process_vcpu_set_event]: /local/domain/1/cpu has no CPU!
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/1/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/1/log-throttling'
medium change watch on `/local/domain/1/log-throttling' - unknown device, ignored
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 00:1a.1 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x0:0x1a.0x1
pt_register_regions: IO region registered (size=0x00000020 base_addr=0x00009a01)
pci_intx: intx=2
register_real_device: Real physical device 00:1a.1 registered successfuly!
IRQ type = INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 0d:00.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0xd:0x0.0x0
pt_register_regions: IO region registered (size=0x00004000 base_addr=0xd7efc000)
pci_intx: intx=1
register_real_device: Real physical device 0d:00.0 registered successfuly!
IRQ type = INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 08:00.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x8:0x0.0x0
pt_register_regions: IO region registered (size=0x02000000 base_addr=0xf8000000)
pt_register_regions: IO region registered (size=0x08000000 base_addr=0xb800000c)
pt_register_regions: IO region registered (size=0x04000000 base_addr=0xb400000c)
pt_register_regions: IO region registered (size=0x00000080 base_addr=0x0000df81)
pt_register_regions: Expansion ROM registered (size=0x00080000 base_addr=0xfbd00000)
pt_msi_setup: msi mapped with pirq 4f
pci_intx: intx=1
register_real_device: Real physical device 08:00.0 registered successfuly!
IRQ type = MSI-INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 08:00.1 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x8:0x0.0x1
pt_register_regions: IO region registered (size=0x00004000 base_addr=0xfbdfc000)
pt_msi_setup: msi mapped with pirq 4e
pci_intx: intx=2
register_real_device: Real physical device 08:00.1 registered successfuly!
IRQ type = MSI-INTx
pt_iomem_map: e_phys=e0000000 maddr=b8000000 type=8 len=134217728 index=1 first_map=1
pt_iomem_map: e_phys=e8000000 maddr=b4000000 type=8 len=67108864 index=3 first_map=1
pt_iomem_map: e_phys=ec000000 maddr=f8000000 type=0 len=33554432 index=0 first_map=1
vga s->lfb_addr = ef000000 s->lfb_end = ef800000
pt_iomem_map: e_phys=ef8a0000 maddr=d7efc000 type=0 len=16384 index=0 first_map=1
pt_iomem_map: e_phys=ef8a4000 maddr=fbdfc000 type=0 len=16384 index=0 first_map=1
pt_ioport_map: e_phys=c100 pio_base=df80 len=128 index=5 first_map=1
pt_ioport_map: e_phys=c1e0 pio_base=9a00 len=32 index=4 first_map=1
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
Unknown PV product 2 loaded in guest
PV driver build 1
region type 0 at [ef880000,ef8a0000).
squash iomem [ef880000, ef8a0000).
region type 1 at [c180,c1c0).
vga s->lfb_addr = ef000000 s->lfb_end = ef800000
pt_ioport_map: e_phys=ffff pio_base=9a00 len=32 index=4 first_map=0
pt_pci_write_config: [00:05:0] Warning: Guest attempt to set address to unused Base Address Register. [Offset:30h][Length:4]
pt_ioport_map: e_phys=c1e0 pio_base=9a00 len=32 index=4 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=d7efc000 type=0 len=16384 index=0 first_map=0
pt_pci_write_config: [00:06:0] Warning: Guest attempt to set address to unused Base Address Register. [Offset:30h][Length:4]
pt_iomem_map: e_phys=ef8a0000 maddr=d7efc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=f8000000 type=0 len=33554432 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=b8000000 type=8 len=134217728 index=1 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=b4000000 type=8 len=67108864 index=3 first_map=0
pt_ioport_map: e_phys=ffff pio_base=df80 len=128 index=5 first_map=0
pt_iomem_map: e_phys=ec000000 maddr=f8000000 type=0 len=33554432 index=0 first_map=0
pt_iomem_map: e_phys=e0000000 maddr=b8000000 type=8 len=134217728 index=1 first_map=0
pt_iomem_map: e_phys=e8000000 maddr=b4000000 type=8 len=67108864 index=3 first_map=0
pt_ioport_map: e_phys=c100 pio_base=df80 len=128 index=5 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbdfc000 type=0 len=16384 index=0 first_map=0
pt_pci_write_config: [00:08:0] Warning: Guest attempt to set address to unused Base Address Register. [Offset:30h][Length:4]
pt_iomem_map: e_phys=ef8a4000 maddr=fbdfc000 type=0 len=16384 index=0 first_map=0
pt_ioport_map: e_phys=ffff pio_base=9a00 len=32 index=4 first_map=0
pt_ioport_map: e_phys=c1e0 pio_base=9a00 len=32 index=4 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbdfc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ef8a4000 maddr=fbdfc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=d7efc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ef8a0000 maddr=d7efc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=f8000000 type=0 len=33554432 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=b8000000 type=8 len=134217728 index=1 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=b4000000 type=8 len=67108864 index=3 first_map=0
pt_ioport_map: e_phys=ffff pio_base=df80 len=128 index=5 first_map=0
pt_iomem_map: e_phys=ec000000 maddr=f8000000 type=0 len=33554432 index=0 first_map=0
pt_iomem_map: e_phys=e0000000 maddr=b8000000 type=8 len=134217728 index=1 first_map=0
pt_iomem_map: e_phys=e8000000 maddr=b4000000 type=8 len=67108864 index=3 first_map=0
pt_ioport_map: e_phys=c100 pio_base=df80 len=128 index=5 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=d7efc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbdfc000 type=0 len=16384 index=0 first_map=0
pt_ioport_map: e_phys=ffff pio_base=9a00 len=32 index=4 first_map=0
shutdown requested in cpu_handle_ioreq
Issued domain 1 poweroff
[-- Attachment #7: qemu-dm-edi.log.8GB --]
[-- Type: text/plain, Size: 8001 bytes --]
domid: 1
Using file /dev/zvol/ssd/edi in read-write mode
Watching /local/domain/0/device-model/1/logdirty/cmd
Watching /local/domain/0/device-model/1/command
Watching /local/domain/1/cpu
char device redirected to /dev/pts/4
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = a57e6840-e9f5-4a14-a822-b2cc662c177f
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/1/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/a57e6840-e9f5-4a14-a822-b2cc662c177f/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
[xenstore_process_vcpu_set_event]: /local/domain/1/cpu has no CPU!
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/1/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/1/log-throttling'
medium change watch on `/local/domain/1/log-throttling' - unknown device, ignored
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 00:1a.1 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x0:0x1a.0x1
pt_register_regions: IO region registered (size=0x00000020 base_addr=0x00009a01)
pci_intx: intx=2
register_real_device: Real physical device 00:1a.1 registered successfuly!
IRQ type = INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 0d:00.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0xd:0x0.0x0
pt_register_regions: IO region registered (size=0x00004000 base_addr=0xd7efc000)
pci_intx: intx=1
register_real_device: Real physical device 0d:00.0 registered successfuly!
IRQ type = INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 08:00.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x8:0x0.0x0
pt_register_regions: IO region registered (size=0x02000000 base_addr=0xf8000000)
pt_register_regions: IO region registered (size=0x08000000 base_addr=0xb800000c)
pt_register_regions: IO region registered (size=0x04000000 base_addr=0xb400000c)
pt_register_regions: IO region registered (size=0x00000080 base_addr=0x0000df81)
pt_register_regions: Expansion ROM registered (size=0x00080000 base_addr=0xfbd00000)
pt_msi_setup: msi mapped with pirq 4f
pci_intx: intx=1
register_real_device: Real physical device 08:00.0 registered successfuly!
IRQ type = MSI-INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 08:00.1 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x8:0x0.0x1
pt_register_regions: IO region registered (size=0x00004000 base_addr=0xfbdfc000)
pt_msi_setup: msi mapped with pirq 4e
pci_intx: intx=2
register_real_device: Real physical device 08:00.1 registered successfuly!
IRQ type = MSI-INTx
pt_iomem_map: e_phys=e0000000 maddr=b8000000 type=8 len=134217728 index=1 first_map=1
pt_iomem_map: e_phys=e8000000 maddr=b4000000 type=8 len=67108864 index=3 first_map=1
pt_iomem_map: e_phys=ec000000 maddr=f8000000 type=0 len=33554432 index=0 first_map=1
vga s->lfb_addr = ef000000 s->lfb_end = ef800000
pt_iomem_map: e_phys=ef8a0000 maddr=d7efc000 type=0 len=16384 index=0 first_map=1
pt_iomem_map: e_phys=ef8a4000 maddr=fbdfc000 type=0 len=16384 index=0 first_map=1
pt_ioport_map: e_phys=c100 pio_base=df80 len=128 index=5 first_map=1
pt_ioport_map: e_phys=c1e0 pio_base=9a00 len=32 index=4 first_map=1
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
Unknown PV product 2 loaded in guest
PV driver build 1
region type 0 at [ef880000,ef8a0000).
squash iomem [ef880000, ef8a0000).
region type 1 at [c180,c1c0).
vga s->lfb_addr = ef000000 s->lfb_end = ef800000
pt_ioport_map: e_phys=ffff pio_base=9a00 len=32 index=4 first_map=0
pt_pci_write_config: [00:05:0] Warning: Guest attempt to set address to unused Base Address Register. [Offset:30h][Length:4]
pt_ioport_map: e_phys=c1e0 pio_base=9a00 len=32 index=4 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=d7efc000 type=0 len=16384 index=0 first_map=0
pt_pci_write_config: [00:06:0] Warning: Guest attempt to set address to unused Base Address Register. [Offset:30h][Length:4]
pt_iomem_map: e_phys=ef8a0000 maddr=d7efc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=f8000000 type=0 len=33554432 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=b8000000 type=8 len=134217728 index=1 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=b4000000 type=8 len=67108864 index=3 first_map=0
pt_ioport_map: e_phys=ffff pio_base=df80 len=128 index=5 first_map=0
pt_iomem_map: e_phys=ec000000 maddr=f8000000 type=0 len=33554432 index=0 first_map=0
pt_iomem_map: e_phys=e0000000 maddr=b8000000 type=8 len=134217728 index=1 first_map=0
pt_iomem_map: e_phys=e8000000 maddr=b4000000 type=8 len=67108864 index=3 first_map=0
pt_ioport_map: e_phys=c100 pio_base=df80 len=128 index=5 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbdfc000 type=0 len=16384 index=0 first_map=0
pt_pci_write_config: [00:08:0] Warning: Guest attempt to set address to unused Base Address Register. [Offset:30h][Length:4]
pt_iomem_map: e_phys=ef8a4000 maddr=fbdfc000 type=0 len=16384 index=0 first_map=0
pt_ioport_map: e_phys=ffff pio_base=9a00 len=32 index=4 first_map=0
pt_ioport_map: e_phys=c1e0 pio_base=9a00 len=32 index=4 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbdfc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ef8a4000 maddr=fbdfc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=d7efc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ef8a0000 maddr=d7efc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=f8000000 type=0 len=33554432 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=b8000000 type=8 len=134217728 index=1 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=b4000000 type=8 len=67108864 index=3 first_map=0
pt_ioport_map: e_phys=ffff pio_base=df80 len=128 index=5 first_map=0
pt_iomem_map: e_phys=ec000000 maddr=f8000000 type=0 len=33554432 index=0 first_map=0
pt_iomem_map: e_phys=e0000000 maddr=b8000000 type=8 len=134217728 index=1 first_map=0
pt_iomem_map: e_phys=e8000000 maddr=b4000000 type=8 len=67108864 index=3 first_map=0
pt_ioport_map: e_phys=c100 pio_base=df80 len=128 index=5 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=d7efc000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbdfc000 type=0 len=16384 index=0 first_map=0
pt_ioport_map: e_phys=ffff pio_base=9a00 len=32 index=4 first_map=0
shutdown requested in cpu_handle_ioreq
Issued domain 1 poweroff
[-- Attachment #8: xl-dmesg.log.2GB --]
[-- Type: text/plain, Size: 22926 bytes --]
__ __ _ _ _____ ___ _ _ __
\ \/ /___ _ __ | || | |___ / / _ \ / | ___| |/ /_
\ // _ \ '_ \ | || |_ |_ \| | | |__| | / _ \ | '_ \
/ \ __/ | | | |__ _| ___) | |_| |__| || __/ | (_) |
/_/\_\___|_| |_| |_|(_)____(_)___/ |_(_)___|_|\___/
(XEN) Xen version 4.3.0 (root@shatteredsilicon.net) (gcc (GCC) 4.4.5 20110214 (Red Hat 4.4.5-6)) debug=n Tue Jul 23 14:28:40 BST 2013
(XEN) Latest ChangeSet:
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: noreboot dom0_vcpus_pin iommu=1 loglvl=all guest_loglvl=all unrestricted_guest=1 msi=1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 4 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009d400 (usable)
(XEN) 000000000009d400 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003f790000 (usable)
(XEN) 000000003f790000 - 000000003f79e000 (ACPI data)
(XEN) 000000003f79e000 - 000000003f7d0000 (ACPI NVS)
(XEN) 000000003f7d0000 - 000000003f7e0000 (reserved)
(XEN) 000000003f7e7000 - 0000000040000000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffc00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000cc0000000 (usable)
(XEN) ACPI: RSDP 000F9F70, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT 3F790100, 0064 (r1 042413 XSDT1438 20130424 MSFT 97)
(XEN) ACPI: FACP 3F790290, 00F4 (r4 042413 FACP1438 20130424 MSFT 97)
(XEN) ACPI: DSDT 3F7904F0, 58A3 (r2 1W555 1W555A58 A58 INTL 20051117)
(XEN) ACPI: FACS 3F79E000, 0040
(XEN) ACPI: APIC 3F790390, 0118 (r2 042413 APIC1438 20130424 MSFT 97)
(XEN) ACPI: MCFG 3F7904B0, 003C (r1 042413 OEMMCFG 20130424 MSFT 97)
(XEN) ACPI: OEMB 3F79E040, 0082 (r1 042413 OEMB1438 20130424 MSFT 97)
(XEN) ACPI: SRAT 3F79A4F0, 0250 (r2 042413 OEMSRAT 1 INTL 1)
(XEN) ACPI: HPET 3F79A740, 0038 (r1 042413 OEMHPET 20130424 MSFT 97)
(XEN) ACPI: DMAR 3F79E0D0, 0120 (r1 AMI OEMDMAR 1 MSFT 97)
(XEN) ACPI: SSDT 3F7A4C70, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117)
(XEN) System RAM: 49143MB (50322612kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 4 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 16 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 18 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 20 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 5 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 17 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 19 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 21 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 32 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 34 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 36 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 48 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 50 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 52 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 33 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 35 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 37 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 49 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 51 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 53 -> Node 1
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-40000000
(XEN) SRAT: Node 0 PXM 0 100000000-6c0000000
(XEN) SRAT: Node 1 PXM 1 6c0000000-cc0000000
(XEN) NUMA: Allocated memnodemap from cbac1d000 - cbac2a000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised DMA width 32 bits
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[3f79e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
(XEN) Processor #16 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
(XEN) Processor #18 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
(XEN) Processor #20 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)
(XEN) Processor #32 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled)
(XEN) Processor #34 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled)
(XEN) Processor #36 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)
(XEN) Processor #48 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)
(XEN) Processor #50 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled)
(XEN) Processor #52 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled)
(XEN) Processor #1 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled)
(XEN) Processor #3 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
(XEN) Processor #5 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled)
(XEN) Processor #17 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled)
(XEN) Processor #19 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled)
(XEN) Processor #21 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled)
(XEN) Processor #33 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
(XEN) Processor #35 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
(XEN) Processor #37 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled)
(XEN) Processor #49 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled)
(XEN) Processor #51 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled)
(XEN) Processor #53 6:12 APIC version 21
(XEN) Overriding APIC driver with bigsmp
(XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 24 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 48 GSI, 4576 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3321.722 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:717: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping not enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping disabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Defaulting to alternative key handling; send 'A' to switch to normal mode.
(XEN) Allocated console ring of 256 KiB.
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4 model 0x2c
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 24 CPUs
(XEN) verify_tsc_reliability: TSC warp detected, disabling TSC_RELIABLE
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1f70000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000420000000->0000000430000000 (12302033 pages to be allocated)
(XEN) Init. ramdisk: 0000000cbbdc3000->0000000cbffff400
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81f70000
(XEN) Init. ramdisk: ffffffff81f70000->ffffffff861ac400
(XEN) Phys-Mach map: ffffffff861ad000->ffffffff8c029870
(XEN) Start info: ffffffff8c02a000->ffffffff8c02a4b4
(XEN) Page tables: ffffffff8c02b000->ffffffff8c090000
(XEN) Boot stack: ffffffff8c090000->ffffffff8c091000
(XEN) TOTAL: ffffffff80000000->ffffffff8c400000
(XEN) ENTRY ADDRESS: ffffffff818091e0
(XEN) Dom0 has maximum 24 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 272kB init memory.
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:03.0
(XEN) PCI add device 0000:00:07.0
(XEN) PCI add device 0000:00:13.0
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:14.1
(XEN) PCI add device 0000:00:14.2
(XEN) PCI add device 0000:00:14.3
(XEN) PCI add device 0000:00:1a.0
(XEN) PCI add device 0000:00:1a.1
(XEN) PCI add device 0000:00:1a.2
(XEN) PCI add device 0000:00:1a.7
(XEN) PCI add device 0000:00:1b.0
(XEN) PCI add device 0000:00:1c.0
(XEN) PCI add device 0000:00:1c.2
(XEN) PCI add device 0000:00:1c.4
(XEN) PCI add device 0000:00:1d.0
(XEN) PCI add device 0000:00:1d.1
(XEN) PCI add device 0000:00:1d.2
(XEN) PCI add device 0000:00:1d.7
(XEN) PCI add device 0000:00:1e.0
(XEN) PCI add device 0000:00:1f.0
(XEN) PCI add device 0000:00:1f.2
(XEN) PCI add device 0000:00:1f.3
(XEN) PCI add device 0000:0f:00.0
(XEN) PCI add device 0000:09:00.0
(XEN) PCI add device 0000:0a:00.0
(XEN) PCI add device 0000:0a:01.0
(XEN) PCI add device 0000:0a:02.0
(XEN) PCI add device 0000:0e:00.0
(XEN) PCI add device 0000:0e:00.1
(XEN) PCI add device 0000:0c:00.0
(XEN) PCI add device 0000:0d:00.0
(XEN) PCI add device 0000:05:00.0
(XEN) PCI add device 0000:06:00.0
(XEN) PCI add device 0000:06:02.0
(XEN) PCI add device 0000:08:00.0
(XEN) PCI add device 0000:08:00.1
(XEN) PCI add device 0000:07:00.0
(XEN) PCI add device 0000:07:00.1
(XEN) PCI add device 0000:03:00.0
(XEN) PCI add device 0000:02:00.0
(XEN) PCI add device 0000:fe:00.0
(XEN) PCI add device 0000:fe:00.1
(XEN) PCI add device 0000:fe:02.0
(XEN) PCI add device 0000:fe:02.1
(XEN) PCI add device 0000:fe:02.2
(XEN) PCI add device 0000:fe:02.3
(XEN) PCI add device 0000:fe:02.4
(XEN) PCI add device 0000:fe:02.5
(XEN) PCI add device 0000:fe:03.0
(XEN) PCI add device 0000:fe:03.1
(XEN) PCI add device 0000:fe:03.2
(XEN) PCI add device 0000:fe:03.4
(XEN) PCI add device 0000:fe:04.0
(XEN) PCI add device 0000:fe:04.1
(XEN) PCI add device 0000:fe:04.2
(XEN) PCI add device 0000:fe:04.3
(XEN) PCI add device 0000:fe:05.0
(XEN) PCI add device 0000:fe:05.1
(XEN) PCI add device 0000:fe:05.2
(XEN) PCI add device 0000:fe:05.3
(XEN) PCI add device 0000:fe:06.0
(XEN) PCI add device 0000:fe:06.1
(XEN) PCI add device 0000:fe:06.2
(XEN) PCI add device 0000:fe:06.3
(XEN) PCI add device 0000:ff:00.0
(XEN) PCI add device 0000:ff:00.1
(XEN) PCI add device 0000:ff:02.0
(XEN) PCI add device 0000:ff:02.1
(XEN) PCI add device 0000:ff:02.2
(XEN) PCI add device 0000:ff:02.3
(XEN) PCI add device 0000:ff:02.4
(XEN) PCI add device 0000:ff:02.5
(XEN) PCI add device 0000:ff:03.0
(XEN) PCI add device 0000:ff:03.1
(XEN) PCI add device 0000:ff:03.2
(XEN) PCI add device 0000:ff:03.4
(XEN) PCI add device 0000:ff:04.0
(XEN) PCI add device 0000:ff:04.1
(XEN) PCI add device 0000:ff:04.2
(XEN) PCI add device 0000:ff:04.3
(XEN) PCI add device 0000:ff:05.0
(XEN) PCI add device 0000:ff:05.1
(XEN) PCI add device 0000:ff:05.2
(XEN) PCI add device 0000:ff:05.3
(XEN) PCI add device 0000:ff:06.0
(XEN) PCI add device 0000:ff:06.1
(XEN) PCI add device 0000:ff:06.2
(XEN) PCI add device 0000:ff:06.3
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) HVM1: HVM Loader
(XEN) HVM1: Detected Xen v4.3.0
(XEN) HVM1: Xenbus rings @0xfeffc000, event channel 10
(XEN) HVM1: System requested ROMBIOS
(XEN) HVM1: CPU speed is 3322 MHz
(XEN) HVM1: Relocating guest memory for lowmem MMIO space enabled
(XEN) irq.c:270: Dom1 PCI link 0 changed 0 -> 5
(XEN) HVM1: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:270: Dom1 PCI link 1 changed 0 -> 10
(XEN) HVM1: PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:270: Dom1 PCI link 2 changed 0 -> 11
(XEN) HVM1: PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:270: Dom1 PCI link 3 changed 0 -> 5
(XEN) HVM1: PCI-ISA link 3 routed to IRQ5
(XEN) HVM1: pci dev 01:2 INTD->IRQ5
(XEN) HVM1: pci dev 01:3 INTA->IRQ10
(XEN) HVM1: pci dev 03:0 INTA->IRQ5
(XEN) HVM1: pci dev 04:0 INTA->IRQ5
(XEN) HVM1: pci dev 05:0 INTB->IRQ11
(XEN) HVM1: pci dev 06:0 INTA->IRQ11
(XEN) HVM1: pci dev 07:0 INTA->IRQ5
(XEN) HVM1: pci dev 08:0 INTB->IRQ10
(XEN) HVM1: No RAM in high memory; setting high_mem resource base to 100000000
(XEN) HVM1: pci dev 07:0 bar 14 size 008000000: 0e000000c
(XEN) memory_map:add: dom1 gfn=e0000 mfn=b8000 nr=8000
(XEN) memory_map:add: dom1 gfn=e8000 mfn=b4000 nr=4000
(XEN) HVM1: pci dev 07:0 bar 1c size 004000000: 0e800000c
(XEN) memory_map:add: dom1 gfn=ec000 mfn=f8000 nr=2000
(XEN) HVM1: pci dev 07:0 bar 10 size 002000000: 0ec000000
(XEN) HVM1: pci dev 03:0 bar 14 size 001000000: 0ee000008
(XEN) HVM1: pci dev 02:0 bar 10 size 000800000: 0ef000008
(XEN) HVM1: pci dev 07:0 bar 30 size 000080000: 0ef800000
(XEN) HVM1: pci dev 04:0 bar 10 size 000020000: 0ef880000
(XEN) HVM1: pci dev 06:0 bar 10 size 000004000: 0ef8a0000
(XEN) memory_map:add: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) HVM1: pci dev 08:0 bar 10 size 000004000: 0ef8a4000
(XEN) memory_map:add: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) HVM1: pci dev 03:0 bar 10 size 000000100: 00000c001
(XEN) HVM1: pci dev 07:0 bar 24 size 000000080: 00000c101
(XEN) ioport_map:add: dom1 gport=c100 mport=df80 nr=80
(XEN) HVM1: pci dev 04:0 bar 14 size 000000040: 00000c181
(XEN) HVM1: pci dev 01:2 bar 20 size 000000020: 00000c1c1
(XEN) HVM1: pci dev 05:0 bar 20 size 000000020: 00000c1e1
(XEN) ioport_map:add: dom1 gport=c1e0 mport=9a00 nr=20
(XEN) HVM1: pci dev 01:1 bar 20 size 000000010: 00000c201
(XEN) HVM1: Multiprocessor initialisation:
(XEN) HVM1: - CPU0 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU1 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU2 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU3 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU4 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU5 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU6 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU7 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: Testing HVM environment:
(XEN) HVM1: - REP INSB across page boundaries ... passed
(XEN) HVM1: - GS base MSRs and SWAPGS ... passed
(XEN) HVM1: Passed 2 of 2 tests
(XEN) HVM1: Writing SMBIOS tables ...
(XEN) HVM1: Loading ROMBIOS ...
(XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions:
(XEN) HVM1: Relocating to 0xfc001000-0xfc00359c ... done
(XEN) HVM1: Creating MP tables ...
(XEN) HVM1: Loading Standard VGABIOS ...
(XEN) HVM1: Loading PCI Option ROM ...
(XEN) HVM1: - Manufacturer: http://ipxe.org
(XEN) HVM1: - Product name: iPXE
(XEN) HVM1: Option ROMs:
(XEN) HVM1: c0000-c9fff: VGA BIOS
(XEN) HVM1: ca000-dafff: Etherboot ROM
(XEN) HVM1: Loading ACPI ...
(XEN) HVM1: vm86 TSS at fc00f700
(XEN) HVM1: BIOS map:
(XEN) HVM1: f0000-fffff: Main BIOS
(XEN) HVM1: E820 table:
(XEN) HVM1: [00]: 00000000:00000000 - 00000000:0009e000: RAM
(XEN) HVM1: [01]: 00000000:0009e000 - 00000000:000a0000: RESERVED
(XEN) HVM1: HOLE: 00000000:000a0000 - 00000000:000e0000
(XEN) HVM1: [02]: 00000000:000e0000 - 00000000:00100000: RESERVED
(XEN) HVM1: [03]: 00000000:00100000 - 00000000:7f800000: RAM
(XEN) HVM1: HOLE: 00000000:7f800000 - 00000000:fc000000
(XEN) HVM1: [04]: 00000000:fc000000 - 00000001:00000000: RESERVED
(XEN) HVM1: Invoking ROMBIOS ...
(XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) stdvga.c:147:d1 entering stdvga and caching modes
(XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert Exp $
(XEN) HVM1: VBE Bios $Id: vbe.c,v 1.60 2008/03/02 07:47:21 vruppert Exp $
(XEN) HVM1: Bochs BIOS - build: 06/23/99
(XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) HVM1: Options: apmbios pcibios eltorito PMM
(XEN) HVM1:
(XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk ( 128 GBytes)
(XEN) HVM1: IDE time out
(XEN) HVM1:
(XEN) HVM1:
(XEN) HVM1:
(XEN) HVM1: Press F12 for boot menu.
(XEN) HVM1:
(XEN) HVM1: Booting from Hard Disk...
(XEN) HVM1: Booting from 0000:7c00
(XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81
(XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported!
(XEN) HVM1: *** int 15h function AX=ec00, BX=0002 not yet supported!
(XEN) irq.c:270: Dom1 PCI link 0 changed 5 -> 0
(XEN) irq.c:270: Dom1 PCI link 1 changed 10 -> 0
(XEN) irq.c:270: Dom1 PCI link 2 changed 11 -> 0
(XEN) irq.c:270: Dom1 PCI link 3 changed 5 -> 0
(XEN) ioport_map:remove: dom1 gport=c1e0 mport=9a00 nr=20
(XEN) ioport_map:add: dom1 gport=c1e0 mport=9a00 nr=20
(XEN) memory_map:remove: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) memory_map:add: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) memory_map:remove: dom1 gfn=ec000 mfn=f8000 nr=2000
(XEN) memory_map:remove: dom1 gfn=e0000 mfn=b8000 nr=8000
(XEN) memory_map:remove: dom1 gfn=e8000 mfn=b4000 nr=4000
(XEN) ioport_map:remove: dom1 gport=c100 mport=df80 nr=80
(XEN) memory_map:add: dom1 gfn=ec000 mfn=f8000 nr=2000
(XEN) memory_map:add: dom1 gfn=e0000 mfn=b8000 nr=8000
(XEN) memory_map:add: dom1 gfn=e8000 mfn=b4000 nr=4000
(XEN) ioport_map:add: dom1 gport=c100 mport=df80 nr=80
(XEN) memory_map:remove: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) memory_map:add: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) grant_table.c:1250:d1 Expanding dom (1) grant table from (4) to (32) frames.
(XEN) irq.c:375: Dom1 callback via changed to GSI 28
(XEN) ioport_map:remove: dom1 gport=c1e0 mport=9a00 nr=20
(XEN) ioport_map:add: dom1 gport=c1e0 mport=9a00 nr=20
(XEN) memory_map:remove: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) memory_map:add: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) memory_map:remove: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) memory_map:add: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) memory_map:remove: dom1 gfn=ec000 mfn=f8000 nr=2000
(XEN) memory_map:remove: dom1 gfn=e0000 mfn=b8000 nr=8000
(XEN) memory_map:remove: dom1 gfn=e8000 mfn=b4000 nr=4000
(XEN) ioport_map:remove: dom1 gport=c100 mport=df80 nr=80
(XEN) memory_map:add: dom1 gfn=ec000 mfn=f8000 nr=2000
(XEN) memory_map:add: dom1 gfn=e0000 mfn=b8000 nr=8000
(XEN) memory_map:add: dom1 gfn=e8000 mfn=b4000 nr=4000
(XEN) ioport_map:add: dom1 gport=c100 mport=df80 nr=80
(XEN) memory_map:remove: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) memory_map:remove: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) ioport_map:remove: dom1 gport=c1e0 mport=9a00 nr=20
[-- Attachment #9: xl-dmesg.log.8GB --]
[-- Type: text/plain, Size: 23235 bytes --]
__ __ _ _ _____ ___ _ _ __
\ \/ /___ _ __ | || | |___ / / _ \ / | ___| |/ /_
\ // _ \ '_ \ | || |_ |_ \| | | |__| | / _ \ | '_ \
/ \ __/ | | | |__ _| ___) | |_| |__| || __/ | (_) |
/_/\_\___|_| |_| |_|(_)____(_)___/ |_(_)___|_|\___/
(XEN) Xen version 4.3.0 (root@shatteredsilicon.net) (gcc (GCC) 4.4.5 20110214 (Red Hat 4.4.5-6)) debug=n Tue Jul 23 14:28:40 BST 2013
(XEN) Latest ChangeSet:
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: noreboot dom0_vcpus_pin iommu=1 loglvl=all guest_loglvl=all unrestricted_guest=1 msi=1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 4 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009d400 (usable)
(XEN) 000000000009d400 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003f790000 (usable)
(XEN) 000000003f790000 - 000000003f79e000 (ACPI data)
(XEN) 000000003f79e000 - 000000003f7d0000 (ACPI NVS)
(XEN) 000000003f7d0000 - 000000003f7e0000 (reserved)
(XEN) 000000003f7e7000 - 0000000040000000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffc00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000cc0000000 (usable)
(XEN) ACPI: RSDP 000F9F70, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT 3F790100, 0064 (r1 042413 XSDT1438 20130424 MSFT 97)
(XEN) ACPI: FACP 3F790290, 00F4 (r4 042413 FACP1438 20130424 MSFT 97)
(XEN) ACPI: DSDT 3F7904F0, 58A3 (r2 1W555 1W555A58 A58 INTL 20051117)
(XEN) ACPI: FACS 3F79E000, 0040
(XEN) ACPI: APIC 3F790390, 0118 (r2 042413 APIC1438 20130424 MSFT 97)
(XEN) ACPI: MCFG 3F7904B0, 003C (r1 042413 OEMMCFG 20130424 MSFT 97)
(XEN) ACPI: OEMB 3F79E040, 0082 (r1 042413 OEMB1438 20130424 MSFT 97)
(XEN) ACPI: SRAT 3F79A4F0, 0250 (r2 042413 OEMSRAT 1 INTL 1)
(XEN) ACPI: HPET 3F79A740, 0038 (r1 042413 OEMHPET 20130424 MSFT 97)
(XEN) ACPI: DMAR 3F79E0D0, 0120 (r1 AMI OEMDMAR 1 MSFT 97)
(XEN) ACPI: SSDT 3F7A4C70, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117)
(XEN) System RAM: 49143MB (50322612kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 4 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 16 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 18 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 20 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 5 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 17 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 19 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 21 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 32 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 34 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 36 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 48 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 50 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 52 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 33 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 35 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 37 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 49 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 51 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 53 -> Node 1
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-40000000
(XEN) SRAT: Node 0 PXM 0 100000000-6c0000000
(XEN) SRAT: Node 1 PXM 1 6c0000000-cc0000000
(XEN) NUMA: Allocated memnodemap from cbac1d000 - cbac2a000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised DMA width 32 bits
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[3f79e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
(XEN) Processor #16 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
(XEN) Processor #18 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
(XEN) Processor #20 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)
(XEN) Processor #32 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled)
(XEN) Processor #34 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled)
(XEN) Processor #36 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)
(XEN) Processor #48 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)
(XEN) Processor #50 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled)
(XEN) Processor #52 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled)
(XEN) Processor #1 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled)
(XEN) Processor #3 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
(XEN) Processor #5 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled)
(XEN) Processor #17 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled)
(XEN) Processor #19 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled)
(XEN) Processor #21 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled)
(XEN) Processor #33 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
(XEN) Processor #35 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
(XEN) Processor #37 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled)
(XEN) Processor #49 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled)
(XEN) Processor #51 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled)
(XEN) Processor #53 6:12 APIC version 21
(XEN) Overriding APIC driver with bigsmp
(XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 24 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 48 GSI, 4576 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3321.755 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:717: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping not enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping disabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Defaulting to alternative key handling; send 'A' to switch to normal mode.
(XEN) Allocated console ring of 256 KiB.
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4 model 0x2c
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 24 CPUs
(XEN) verify_tsc_reliability: TSC warp detected, disabling TSC_RELIABLE
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1f70000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000420000000->0000000430000000 (12302037 pages to be allocated)
(XEN) Init. ramdisk: 0000000cbbdc3000->0000000cbffff400
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81f70000
(XEN) Init. ramdisk: ffffffff81f70000->ffffffff861ac400
(XEN) Phys-Mach map: ffffffff861ad000->ffffffff8c029890
(XEN) Start info: ffffffff8c02a000->ffffffff8c02a4b4
(XEN) Page tables: ffffffff8c02b000->ffffffff8c090000
(XEN) Boot stack: ffffffff8c090000->ffffffff8c091000
(XEN) TOTAL: ffffffff80000000->ffffffff8c400000
(XEN) ENTRY ADDRESS: ffffffff818091e0
(XEN) Dom0 has maximum 24 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 272kB init memory.
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:03.0
(XEN) PCI add device 0000:00:07.0
(XEN) PCI add device 0000:00:13.0
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:14.1
(XEN) PCI add device 0000:00:14.2
(XEN) PCI add device 0000:00:14.3
(XEN) PCI add device 0000:00:1a.0
(XEN) PCI add device 0000:00:1a.1
(XEN) PCI add device 0000:00:1a.2
(XEN) PCI add device 0000:00:1a.7
(XEN) PCI add device 0000:00:1b.0
(XEN) PCI add device 0000:00:1c.0
(XEN) PCI add device 0000:00:1c.2
(XEN) PCI add device 0000:00:1c.4
(XEN) PCI add device 0000:00:1d.0
(XEN) PCI add device 0000:00:1d.1
(XEN) PCI add device 0000:00:1d.2
(XEN) PCI add device 0000:00:1d.7
(XEN) PCI add device 0000:00:1e.0
(XEN) PCI add device 0000:00:1f.0
(XEN) PCI add device 0000:00:1f.2
(XEN) PCI add device 0000:00:1f.3
(XEN) PCI add device 0000:0f:00.0
(XEN) PCI add device 0000:09:00.0
(XEN) PCI add device 0000:0a:00.0
(XEN) PCI add device 0000:0a:01.0
(XEN) PCI add device 0000:0a:02.0
(XEN) PCI add device 0000:0e:00.0
(XEN) PCI add device 0000:0e:00.1
(XEN) PCI add device 0000:0c:00.0
(XEN) PCI add device 0000:0d:00.0
(XEN) PCI add device 0000:05:00.0
(XEN) PCI add device 0000:06:00.0
(XEN) PCI add device 0000:06:02.0
(XEN) PCI add device 0000:08:00.0
(XEN) PCI add device 0000:08:00.1
(XEN) PCI add device 0000:07:00.0
(XEN) PCI add device 0000:07:00.1
(XEN) PCI add device 0000:03:00.0
(XEN) PCI add device 0000:02:00.0
(XEN) PCI add device 0000:fe:00.0
(XEN) PCI add device 0000:fe:00.1
(XEN) PCI add device 0000:fe:02.0
(XEN) PCI add device 0000:fe:02.1
(XEN) PCI add device 0000:fe:02.2
(XEN) PCI add device 0000:fe:02.3
(XEN) PCI add device 0000:fe:02.4
(XEN) PCI add device 0000:fe:02.5
(XEN) PCI add device 0000:fe:03.0
(XEN) PCI add device 0000:fe:03.1
(XEN) PCI add device 0000:fe:03.2
(XEN) PCI add device 0000:fe:03.4
(XEN) PCI add device 0000:fe:04.0
(XEN) PCI add device 0000:fe:04.1
(XEN) PCI add device 0000:fe:04.2
(XEN) PCI add device 0000:fe:04.3
(XEN) PCI add device 0000:fe:05.0
(XEN) PCI add device 0000:fe:05.1
(XEN) PCI add device 0000:fe:05.2
(XEN) PCI add device 0000:fe:05.3
(XEN) PCI add device 0000:fe:06.0
(XEN) PCI add device 0000:fe:06.1
(XEN) PCI add device 0000:fe:06.2
(XEN) PCI add device 0000:fe:06.3
(XEN) PCI add device 0000:ff:00.0
(XEN) PCI add device 0000:ff:00.1
(XEN) PCI add device 0000:ff:02.0
(XEN) PCI add device 0000:ff:02.1
(XEN) PCI add device 0000:ff:02.2
(XEN) PCI add device 0000:ff:02.3
(XEN) PCI add device 0000:ff:02.4
(XEN) PCI add device 0000:ff:02.5
(XEN) PCI add device 0000:ff:03.0
(XEN) PCI add device 0000:ff:03.1
(XEN) PCI add device 0000:ff:03.2
(XEN) PCI add device 0000:ff:03.4
(XEN) PCI add device 0000:ff:04.0
(XEN) PCI add device 0000:ff:04.1
(XEN) PCI add device 0000:ff:04.2
(XEN) PCI add device 0000:ff:04.3
(XEN) PCI add device 0000:ff:05.0
(XEN) PCI add device 0000:ff:05.1
(XEN) PCI add device 0000:ff:05.2
(XEN) PCI add device 0000:ff:05.3
(XEN) PCI add device 0000:ff:06.0
(XEN) PCI add device 0000:ff:06.1
(XEN) PCI add device 0000:ff:06.2
(XEN) PCI add device 0000:ff:06.3
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000000000002 to 0x0000000000000000.
(XEN) memory.c:132:d0 Could not allocate order=18 extent: id=1 memflags=0 (0 of 1)
(XEN) HVM1: HVM Loader
(XEN) HVM1: Detected Xen v4.3.0
(XEN) HVM1: Xenbus rings @0xfeffc000, event channel 10
(XEN) HVM1: System requested ROMBIOS
(XEN) HVM1: CPU speed is 3322 MHz
(XEN) HVM1: Relocating guest memory for lowmem MMIO space enabled
(XEN) irq.c:270: Dom1 PCI link 0 changed 0 -> 5
(XEN) HVM1: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:270: Dom1 PCI link 1 changed 0 -> 10
(XEN) HVM1: PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:270: Dom1 PCI link 2 changed 0 -> 11
(XEN) HVM1: PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:270: Dom1 PCI link 3 changed 0 -> 5
(XEN) HVM1: PCI-ISA link 3 routed to IRQ5
(XEN) HVM1: pci dev 01:2 INTD->IRQ5
(XEN) HVM1: pci dev 01:3 INTA->IRQ10
(XEN) HVM1: pci dev 03:0 INTA->IRQ5
(XEN) HVM1: pci dev 04:0 INTA->IRQ5
(XEN) HVM1: pci dev 05:0 INTB->IRQ11
(XEN) HVM1: pci dev 06:0 INTA->IRQ11
(XEN) HVM1: pci dev 07:0 INTA->IRQ5
(XEN) HVM1: pci dev 08:0 INTB->IRQ10
(XEN) HVM1: Relocating 0xffff pages from 0e0001000 to 20f800000 for lowmem MMIO hole
(XEN) HVM1: Relocating 0x1 pages from 0e0000000 to 21f7ff000 for lowmem MMIO hole
(XEN) HVM1: RAM in high memory; setting high_mem resource base to 21f800000
(XEN) HVM1: pci dev 07:0 bar 14 size 008000000: 0e000000c
(XEN) memory_map:add: dom1 gfn=e0000 mfn=b8000 nr=8000
(XEN) memory_map:add: dom1 gfn=e8000 mfn=b4000 nr=4000
(XEN) HVM1: pci dev 07:0 bar 1c size 004000000: 0e800000c
(XEN) memory_map:add: dom1 gfn=ec000 mfn=f8000 nr=2000
(XEN) HVM1: pci dev 07:0 bar 10 size 002000000: 0ec000000
(XEN) HVM1: pci dev 03:0 bar 14 size 001000000: 0ee000008
(XEN) HVM1: pci dev 02:0 bar 10 size 000800000: 0ef000008
(XEN) HVM1: pci dev 07:0 bar 30 size 000080000: 0ef800000
(XEN) HVM1: pci dev 04:0 bar 10 size 000020000: 0ef880000
(XEN) HVM1: pci dev 06:0 bar 10 size 000004000: 0ef8a0000
(XEN) memory_map:add: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) HVM1: pci dev 08:0 bar 10 size 000004000: 0ef8a4000
(XEN) memory_map:add: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) HVM1: pci dev 03:0 bar 10 size 000000100: 00000c001
(XEN) HVM1: pci dev 07:0 bar 24 size 000000080: 00000c101
(XEN) ioport_map:add: dom1 gport=c100 mport=df80 nr=80
(XEN) HVM1: pci dev 04:0 bar 14 size 000000040: 00000c181
(XEN) HVM1: pci dev 01:2 bar 20 size 000000020: 00000c1c1
(XEN) HVM1: pci dev 05:0 bar 20 size 000000020: 00000c1e1
(XEN) ioport_map:add: dom1 gport=c1e0 mport=9a00 nr=20
(XEN) HVM1: pci dev 01:1 bar 20 size 000000010: 00000c201
(XEN) HVM1: Multiprocessor initialisation:
(XEN) HVM1: - CPU0 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU1 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU2 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU3 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU4 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU5 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU6 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: - CPU7 ... 40-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: Testing HVM environment:
(XEN) HVM1: - REP INSB across page boundaries ... passed
(XEN) HVM1: - GS base MSRs and SWAPGS ... passed
(XEN) HVM1: Passed 2 of 2 tests
(XEN) HVM1: Writing SMBIOS tables ...
(XEN) HVM1: Loading ROMBIOS ...
(XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions:
(XEN) HVM1: Relocating to 0xfc001000-0xfc00359c ... done
(XEN) HVM1: Creating MP tables ...
(XEN) HVM1: Loading Standard VGABIOS ...
(XEN) HVM1: Loading PCI Option ROM ...
(XEN) HVM1: - Manufacturer: http://ipxe.org
(XEN) HVM1: - Product name: iPXE
(XEN) HVM1: Option ROMs:
(XEN) HVM1: c0000-c9fff: VGA BIOS
(XEN) HVM1: ca000-dafff: Etherboot ROM
(XEN) HVM1: Loading ACPI ...
(XEN) HVM1: vm86 TSS at fc00f700
(XEN) HVM1: BIOS map:
(XEN) HVM1: f0000-fffff: Main BIOS
(XEN) HVM1: E820 table:
(XEN) HVM1: [00]: 00000000:00000000 - 00000000:0009e000: RAM
(XEN) HVM1: [01]: 00000000:0009e000 - 00000000:000a0000: RESERVED
(XEN) HVM1: HOLE: 00000000:000a0000 - 00000000:000e0000
(XEN) HVM1: [02]: 00000000:000e0000 - 00000000:00100000: RESERVED
(XEN) HVM1: [03]: 00000000:00100000 - 00000000:e0000000: RAM
(XEN) HVM1: HOLE: 00000000:e0000000 - 00000000:fc000000
(XEN) HVM1: [04]: 00000000:fc000000 - 00000001:00000000: RESERVED
(XEN) HVM1: [05]: 00000001:00000000 - 00000002:1f800000: RAM
(XEN) HVM1: Invoking ROMBIOS ...
(XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) stdvga.c:147:d1 entering stdvga and caching modes
(XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert Exp $
(XEN) HVM1: VBE Bios $Id: vbe.c,v 1.60 2008/03/02 07:47:21 vruppert Exp $
(XEN) HVM1: Bochs BIOS - build: 06/23/99
(XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) HVM1: Options: apmbios pcibios eltorito PMM
(XEN) HVM1:
(XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk ( 128 GBytes)
(XEN) HVM1: IDE time out
(XEN) HVM1:
(XEN) HVM1:
(XEN) HVM1:
(XEN) HVM1: Press F12 for boot menu.
(XEN) HVM1:
(XEN) HVM1: Booting from Hard Disk...
(XEN) HVM1: Booting from 0000:7c00
(XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81
(XEN) HVM1: *** int 15h function AX=e980, BX=007e not yet supported!
(XEN) HVM1: *** int 15h function AX=ec00, BX=0002 not yet supported!
(XEN) irq.c:270: Dom1 PCI link 0 changed 5 -> 0
(XEN) irq.c:270: Dom1 PCI link 1 changed 10 -> 0
(XEN) irq.c:270: Dom1 PCI link 2 changed 11 -> 0
(XEN) irq.c:270: Dom1 PCI link 3 changed 5 -> 0
(XEN) ioport_map:remove: dom1 gport=c1e0 mport=9a00 nr=20
(XEN) ioport_map:add: dom1 gport=c1e0 mport=9a00 nr=20
(XEN) memory_map:remove: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) memory_map:add: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) memory_map:remove: dom1 gfn=ec000 mfn=f8000 nr=2000
(XEN) memory_map:remove: dom1 gfn=e0000 mfn=b8000 nr=8000
(XEN) memory_map:remove: dom1 gfn=e8000 mfn=b4000 nr=4000
(XEN) ioport_map:remove: dom1 gport=c100 mport=df80 nr=80
(XEN) memory_map:add: dom1 gfn=ec000 mfn=f8000 nr=2000
(XEN) memory_map:add: dom1 gfn=e0000 mfn=b8000 nr=8000
(XEN) memory_map:add: dom1 gfn=e8000 mfn=b4000 nr=4000
(XEN) ioport_map:add: dom1 gport=c100 mport=df80 nr=80
(XEN) memory_map:remove: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) memory_map:add: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) grant_table.c:1250:d1 Expanding dom (1) grant table from (4) to (32) frames.
(XEN) irq.c:375: Dom1 callback via changed to GSI 28
(XEN) ioport_map:remove: dom1 gport=c1e0 mport=9a00 nr=20
(XEN) ioport_map:add: dom1 gport=c1e0 mport=9a00 nr=20
(XEN) memory_map:remove: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) memory_map:add: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) memory_map:remove: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) memory_map:add: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) memory_map:remove: dom1 gfn=ec000 mfn=f8000 nr=2000
(XEN) memory_map:remove: dom1 gfn=e0000 mfn=b8000 nr=8000
(XEN) memory_map:remove: dom1 gfn=e8000 mfn=b4000 nr=4000
(XEN) ioport_map:remove: dom1 gport=c100 mport=df80 nr=80
(XEN) memory_map:add: dom1 gfn=ec000 mfn=f8000 nr=2000
(XEN) memory_map:add: dom1 gfn=e0000 mfn=b8000 nr=8000
(XEN) memory_map:add: dom1 gfn=e8000 mfn=b4000 nr=4000
(XEN) ioport_map:add: dom1 gport=c100 mport=df80 nr=80
(XEN) memory_map:remove: dom1 gfn=ef8a0 mfn=d7efc nr=4
(XEN) memory_map:remove: dom1 gfn=ef8a4 mfn=fbdfc nr=4
(XEN) ioport_map:remove: dom1 gport=c1e0 mport=9a00 nr=20
[-- Attachment #10: xl-edi.log.2GB --]
[-- Type: text/plain, Size: 465 bytes --]
Waiting for domain edi (domid 1) to die [pid 8660]
Domain 1 has shut down, reason code 0 0x0
Action for shutdown reason code 0 is destroy
Domain 1 needs to be cleaned up: destroying the domain
libxl: error: libxl_pci.c:990:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:08:00.0
libxl: error: libxl_pci.c:990:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:08:00.1
Done. Exiting now
[-- Attachment #11: xl-edi.log.8GB --]
[-- Type: text/plain, Size: 465 bytes --]
Waiting for domain edi (domid 1) to die [pid 8596]
Domain 1 has shut down, reason code 0 0x0
Action for shutdown reason code 0 is destroy
Domain 1 needs to be cleaned up: destroying the domain
libxl: error: libxl_pci.c:990:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:08:00.0
libxl: error: libxl_pci.c:990:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:08:00.1
Done. Exiting now
[-- Attachment #12: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2013-07-24 22:15 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-23 22:34 Bug: Limitation of <=2GB RAM in domU persists with 4.3.0 Gordan Bobic
2013-07-24 14:08 ` Konrad Rzeszutek Wilk
2013-07-24 14:17 ` Gordan Bobic
2013-07-24 16:06 ` Konrad Rzeszutek Wilk
2013-07-24 16:14 ` Gordan Bobic
2013-07-24 16:31 ` Konrad Rzeszutek Wilk
2013-07-24 17:26 ` Gordan Bobic
2013-07-24 22:15 ` Gordan Bobic [this message]
2013-07-25 19:18 ` George Dunlap
2013-07-25 21:48 ` Gordan Bobic
2013-07-25 22:23 ` Gordan Bobic
2013-07-26 0:21 ` Ian Campbell
2013-07-26 1:15 ` Andrew Bobulsky
2013-07-26 9:28 ` Gordan Bobic
2013-07-26 13:11 ` Gordan Bobic
2013-07-31 17:53 ` George Dunlap
2013-07-31 17:56 ` Andrew Cooper
2013-07-31 19:36 ` Gordan Bobic
2013-07-31 19:35 ` Gordan Bobic
2013-08-01 9:15 ` George Dunlap
2013-08-01 13:10 ` Fabio Fantoni
2013-08-02 14:43 ` George Dunlap
2013-07-28 10:26 ` Konrad Rzeszutek Wilk
2013-07-28 21:24 ` Gordan Bobic
2013-07-28 23:17 ` Konrad Rzeszutek Wilk
2013-07-28 23:30 ` Gordan Bobic
2013-07-29 9:53 ` Ian Campbell
2013-07-26 9:23 ` Gordan Bobic
2013-07-29 11:14 ` Ian Campbell
2013-07-29 18:04 ` Konrad Rzeszutek Wilk
2013-09-03 13:53 ` Gordan Bobic
2013-09-03 14:59 ` Konrad Rzeszutek Wilk
2013-09-03 19:47 ` HVM support for e820_host (Was: Bug: Limitation of <=2GB RAM in domU persists with 4.3.0) Gordan Bobic
2013-09-03 20:35 ` Gordan Bobic
2013-09-03 20:49 ` Gordan Bobic
2013-09-03 21:10 ` Konrad Rzeszutek Wilk
2013-09-03 21:24 ` Gordan Bobic
2013-09-03 21:30 ` Konrad Rzeszutek Wilk
2013-09-04 0:18 ` Gordan Bobic
2013-09-04 14:08 ` Konrad Rzeszutek Wilk
2013-09-04 14:23 ` Gordan Bobic
2013-09-04 18:00 ` Konrad Rzeszutek Wilk
2013-09-03 21:08 ` Konrad Rzeszutek Wilk
2013-09-04 9:21 ` Gordan Bobic
2013-09-04 11:01 ` Gordan Bobic
2013-09-04 13:11 ` Gordan Bobic
2013-09-04 20:18 ` Gordan Bobic
2013-09-05 2:04 ` Konrad Rzeszutek Wilk
2013-09-05 9:41 ` Gordan Bobic
2013-09-05 10:00 ` Gordan Bobic
2013-09-05 12:36 ` Konrad Rzeszutek Wilk
2013-09-05 10:26 ` Gordan Bobic
2013-09-05 12:38 ` Konrad Rzeszutek Wilk
2013-09-05 21:13 ` Gordan Bobic
2013-09-05 21:29 ` Gordan Bobic
2013-09-05 21:46 ` Gordan Bobic
2013-09-05 22:23 ` Konrad Rzeszutek Wilk
2013-09-05 22:42 ` Gordan Bobic
2013-09-06 13:09 ` Konrad Rzeszutek Wilk
2013-09-06 14:09 ` Gordan Bobic
2013-09-05 22:45 ` Gordan Bobic
2013-09-05 23:01 ` Konrad Rzeszutek Wilk
2013-09-06 12:23 ` Gordan Bobic
2013-09-06 13:20 ` Konrad Rzeszutek Wilk
2013-09-06 14:45 ` Gordan Bobic
2013-09-05 22:33 ` Gordan Bobic
2013-09-06 13:04 ` Konrad Rzeszutek Wilk
2013-09-06 13:34 ` Gordan Bobic
2013-09-06 14:32 ` Konrad Rzeszutek Wilk
2013-09-06 16:30 ` Gordan Bobic
2013-09-06 19:54 ` Gordan Bobic
2013-09-10 13:35 ` Konrad Rzeszutek Wilk
2013-09-10 15:04 ` Gordan Bobic
2013-07-25 21:26 ` Bug: Limitation of <=2GB RAM in domU persists with 4.3.0 Gordan Bobic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51F051F1.5050806@bobich.net \
--to=gordan@bobich.net \
--cc=konrad.wilk@oracle.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.