diff for duplicates of <51F2B0C4.8000301@wwwdotorg.org> diff --git a/a/1.txt b/N1/1.txt index dfca422..0ddb0c2 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,4 +1,4 @@ -On 07/25/2013 04:04 PM, dinguyen@altera.com wrote: +On 07/25/2013 04:04 PM, dinguyen at altera.com wrote: > From: Dinh Nguyen <dinguyen@altera.com> > > Add bindings for SD/MMC for SOCFPGA. @@ -53,7 +53,7 @@ each logical block. The internal construction of the Linux drivers (presumably you have entirely separate code to handle the two nodes in Linux so far?) should not influence the DT construction at all. -> + dwmmc0@ff704000 { +> + dwmmc0 at ff704000 { > + compatible = "altr,socfpga-dw-mshc"; > + reg = <0xff704000 0x1000>; > + interrupts = <0 139 4>; @@ -61,7 +61,7 @@ Linux so far?) should not influence the DT construction at all. > + #size-cells = <0>; > + }; > + -> + dwmmc0@ff704000 { +> + dwmmc0 at ff704000 { > + num-slots = <1>; > + supports-highspeed; > + broken-cd; @@ -69,7 +69,7 @@ Linux so far?) should not influence the DT construction at all. > + altr,dw-mshc-ciu-div = <3>; > + altr,dw-mshc-sdr-timing = <0 3>; > + -> + slot@0 { +> + slot at 0 { > + reg = <0>; > + bus-width = <4>; > + }; diff --git a/a/content_digest b/N1/content_digest index 932f799..4c5abfe 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,19 +1,11 @@ "ref\01374789881-20611-1-git-send-email-dinguyen@altera.com\0" - "From\0Stephen Warren <swarren@wwwdotorg.org>\0" - "Subject\0Re: [PATCH] ARM: socfpga: dts: Add support for SD/MMC\0" + "From\0swarren@wwwdotorg.org (Stephen Warren)\0" + "Subject\0[PATCH] ARM: socfpga: dts: Add support for SD/MMC\0" "Date\0Fri, 26 Jul 2013 11:24:20 -0600\0" - "To\0dinguyen@altera.com\0" - "Cc\0dinh.linux@gmail.com" - Rob Herring <rob.herring@calxeda.com> - Pawel Moll <pawel.moll@arm.com> - Mark Rutland <mark.rutland@arm.com> - Ian Campbell <ian.campbell@citrix.com> - devicetree@vger.kernel.org - linux-mmc@vger.kernel.org - " linux-arm-kernel@lists.infradead.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" - "On 07/25/2013 04:04 PM, dinguyen@altera.com wrote:\n" + "On 07/25/2013 04:04 PM, dinguyen at altera.com wrote:\n" "> From: Dinh Nguyen <dinguyen@altera.com>\n" "> \n" "> Add bindings for SD/MMC for SOCFPGA.\n" @@ -68,7 +60,7 @@ "(presumably you have entirely separate code to handle the two nodes in\n" "Linux so far?) should not influence the DT construction at all.\n" "\n" - "> +\tdwmmc0@ff704000 {\n" + "> +\tdwmmc0 at ff704000 {\n" "> +\t\tcompatible = \"altr,socfpga-dw-mshc\";\n" "> +\t\treg = <0xff704000 0x1000>;\n" "> +\t\tinterrupts = <0 139 4>;\n" @@ -76,7 +68,7 @@ "> +\t\t#size-cells = <0>;\n" "> +\t};\n" "> +\n" - "> +\tdwmmc0@ff704000 {\n" + "> +\tdwmmc0 at ff704000 {\n" "> +\t\tnum-slots = <1>;\n" "> +\t\tsupports-highspeed;\n" "> +\t\tbroken-cd;\n" @@ -84,7 +76,7 @@ "> +\t\taltr,dw-mshc-ciu-div = <3>;\n" "> + \t\taltr,dw-mshc-sdr-timing = <0 3>;\n" "> +\n" - "> +\t\tslot@0 {\n" + "> +\t\tslot at 0 {\n" "> +\t\t\treg = <0>;\n" "> +\t\t\tbus-width = <4>;\n" "> +\t\t};\n" @@ -93,4 +85,4 @@ "\n" You might want to trim that trailing blank line. -d4de743cb46cbf29b4bf5e2f88bc7c8cfd620f370a51a3a2274aeb4447bc8669 +0c1f281a7f715aa9d05d0e2dd38752fa0895c563537fc81667b15784ef436106
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.