From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexander Holler Subject: Re: OMAP5912 boot broken by "gpio/omap: don't create an IRQ mapping for every GPIO on DT" Date: Mon, 29 Jul 2013 16:52:52 +0200 Message-ID: <51F681C4.3000400@ahsoftware.de> References: <51F633AE.8090308@collabora.co.uk> <51F63864.9000601@collabora.co.uk> <51F666B7.7020209@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from h1446028.stratoserver.net ([85.214.92.142]:57220 "EHLO mail.ahsoftware.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757074Ab3G2O4Q (ORCPT ); Mon, 29 Jul 2013 10:56:16 -0400 Received: from eiche.ahsoftware (p57B216E0.dip0.t-ipconnect.de [87.178.22.224]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.ahsoftware.de (Postfix) with ESMTPSA id 4404D423C272 for ; Mon, 29 Jul 2013 16:56:14 +0200 (CEST) In-Reply-To: <51F666B7.7020209@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Santosh Shilimkar Cc: Javier Martinez Canillas , Linus Walleij , Paul Walmsley , Linux-OMAP , Enric Balletbo i Serra , "linux-arm-kernel@lists.infradead.org" , Grant Likely , Jean-Christophe PLAGNIOL-VILLARD , Kevin Hilman Am 29.07.2013 14:57, schrieb Santosh Shilimkar: > With some helps from MMC and other guys, we validated the Linus's tip which includes > your patches. It actually doesn't break anything and as OMAP hsmmc maintainer > clarified, the cd-gpios isn't supported yet for DT. While supporting that it > can use appropriate binding whichever works. > > But with OMAP1 breakage reported by Paul, I think we are not left with choice > but to revert those commits. We *must* respect rc rules for the fixes. > *No regression* > > Thanks for your hardwork to cook up those patches but now Linus's W proposal > is going to be generic, hopefully the issue can be address better. Till > then we can't get the ethernet support. The problem never was just the omap_hsmmc driver. I rather would say all drivers which do use GPIOs as IRQs were affected. I've only used the omap_hsmmc driver as example, because that was the driver I've tried to actually use with sd-cards, which is rather impossible without having a working CD-signal. And all code was already there and seems to work (at least during my few tests), so I've just added an entry to the dts to be able to use a mmc-slot as one would expect a mmc-slot does work. If someone wants to test a new feature at the same front, I would suggest to try it out using gpio-keys. That driver should work on almost any architecture/platform/hardware which supports gpios and is small enough to be a good test candidate. Having had a short look at gpio-keys.c, I think the same problems as with omap_hsmmc would have been occured when someone had tried to use that driver with 3.11-rc2. Regards, Alexander Holler From mboxrd@z Thu Jan 1 00:00:00 1970 From: holler@ahsoftware.de (Alexander Holler) Date: Mon, 29 Jul 2013 16:52:52 +0200 Subject: OMAP5912 boot broken by "gpio/omap: don't create an IRQ mapping for every GPIO on DT" In-Reply-To: <51F666B7.7020209@ti.com> References: <51F633AE.8090308@collabora.co.uk> <51F63864.9000601@collabora.co.uk> <51F666B7.7020209@ti.com> Message-ID: <51F681C4.3000400@ahsoftware.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Am 29.07.2013 14:57, schrieb Santosh Shilimkar: > With some helps from MMC and other guys, we validated the Linus's tip which includes > your patches. It actually doesn't break anything and as OMAP hsmmc maintainer > clarified, the cd-gpios isn't supported yet for DT. While supporting that it > can use appropriate binding whichever works. > > But with OMAP1 breakage reported by Paul, I think we are not left with choice > but to revert those commits. We *must* respect rc rules for the fixes. > *No regression* > > Thanks for your hardwork to cook up those patches but now Linus's W proposal > is going to be generic, hopefully the issue can be address better. Till > then we can't get the ethernet support. The problem never was just the omap_hsmmc driver. I rather would say all drivers which do use GPIOs as IRQs were affected. I've only used the omap_hsmmc driver as example, because that was the driver I've tried to actually use with sd-cards, which is rather impossible without having a working CD-signal. And all code was already there and seems to work (at least during my few tests), so I've just added an entry to the dts to be able to use a mmc-slot as one would expect a mmc-slot does work. If someone wants to test a new feature at the same front, I would suggest to try it out using gpio-keys. That driver should work on almost any architecture/platform/hardware which supports gpios and is small enough to be a good test candidate. Having had a short look at gpio-keys.c, I think the same problems as with omap_hsmmc would have been occured when someone had tried to use that driver with 3.11-rc2. Regards, Alexander Holler