Re: DFS referrals

[Marcus Moeller <marcus.moeller-OI3hZJvNYWs@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 3033 bytes --]

Hi again,

>>>>> On Mon, 29 Jul 2013 14:50:03 +0200
>>>>> Marcus Moeller <marcus.moeller-OI3hZJvNYWs@public.gmane.org> wrote:
>>>>>
>>>>>> [  124.607810] fs/cifs/cifssmb.c: negprot rc 0
>>>>>> [  124.607814] fs/cifs/connect.c: Security Mode: 0xf Capabilities:
>>>>>> 0x8001f3fc TimeAdjust: -7200
>>>>>> [  124.607817] fs/cifs/sess.c: sess setup type 4
>>>>>> [  124.607826] fs/cifs/cifs_spnego.c: key description =
>>>>>> ver=0x2;host=d.ethz.ch;ip4=82.130.70.6;sec=krb5;uid=0xaf05;creduid=0xaf05;user=mam4tst;pid=0x61a
>>>>>>
>>>>>>
>>>>>> [  124.803185] fs/cifs/sess.c: ssetup freeing small buf
>>>>>> ffff88022c31a000
>>>>>> [  124.803195] CIFS VFS: Send error in SessSetup = -126
>>>>>> [  124.803203] fs/cifs/connect.c: CIFS VFS: leaving
>>>>>> cifs_get_smb_ses (xid = 5) rc = -126
>>>>>> [  124.803212] fs/cifs/fscache.c:
>>>>>> cifs_fscache_release_client_cookie:
>>>>>> (0xffff88022a1b6000/0xffff88022a6430f0)
>>>>>> [  124.803368] fs/cifs/connect.c: CIFS VFS: leaving cifs_mount (xid
>>>>>> = 4) rc = -126
>>>>>> [  124.803374] CIFS VFS: cifs_mount failed w/return code = -126
>>>>>
>>>>> The only failure I see is the one above, and that's because it failed
>>>>> to upcall for the correct key. Are you sure you have krb5 creds as
>>>>> that
>>>>> user?
>>>>
>>>> Yes, creds are there and it also works when mounting from one of the
>>>> servers directly.
>>>>
>>>> Only mounting using the domainname does not work.
>>>>
>>>>
>>>>>> [  131.324798] fs/cifs/cifssmb.c: negprot rc 0
>>>>>> [  131.324804] fs/cifs/connect.c: Security Mode: 0xf Capabilities:
>>>>>> 0x8001f3fc TimeAdjust: -7200
>>>>>> [  131.324808] fs/cifs/sess.c: sess setup type 4
>>>>>> [  131.324821] fs/cifs/cifs_spnego.c: key description =
>>>>>> ver=0x2;host=d.ethz.ch;ip4=172.31.65.62;sec=krb5;uid=0xaf05;creduid=0xaf05;user=mam4tst;pid=0x62c

>>>>>> [  131.384335] fs/cifs/transport.c: For smb_command 115
>>>>>> [  131.384344] fs/cifs/transport.c: Sending smb: smb_len=1666
>>>>>> [  131.387043] fs/cifs/connect.c: RFC1002 header 0xf9
>>>>>> [  131.387055] fs/cifs/misc.c: checkSMB Length: 0xfd,
>>>>>> smb_buf_length: 0xf9
>>>>>> [  131.387095] fs/cifs/transport.c: cifs_sync_mid_result: cmd=115
>>>>>> mid=2 state=4
>>>>>> [  131.387100] fs/cifs/misc.c: Null buffer passed to
>>>>>> cifs_small_buf_release
>>>>>
>>>>> Here' the upcall for a similar set of creds worked fine. The only
>>>>> thing
>>>>> that seems to have changed in the key description is the IP address.
>>>>>
>>>>> Do you have cifs.upcall set up to use the --trust-dns flag? If so,
>>>>> why?
>>>>
>>>> A relict from the past. I have removed it from the config. Thanks for
>>>> pointing out.

Sorry, I was wrong. Without the -t option I am not even able to mount it 
at all. The man page states a few words on that parameter, but I am 
still not sure how it works when -t is not set.

With -t set, the initial problem with the domain lookup works, when 
reverse DNS is configured propably.

Greets
Marcus



[-- Attachment #2: S/MIME Kryptografische Unterschrift --]
[-- Type: application/pkcs7-signature, Size: 2460 bytes --]