From mboxrd@z Thu Jan  1 00:00:00 1970
From: finn@uni-bremen.de (Finn Hoffmann)
Date: Wed, 31 Jul 2013 13:41:23 +0200
Subject: NSA310 + DT
In-Reply-To: <20130731115108.21c043fd@skate>
References: <20130710073706.GA28212@lunn.ch> <51F6A0DC.3020501@uni-bremen.de>
 <20130729192112.GY29916@titan.lakedaemon.net>
 <20130729204315.GK24782@lunn.ch> <51F78DA6.8010307@uni-bremen.de>
 <20130730144752.GR24782@lunn.ch> <20130730172407.3aab15c6@skate>
 <51F7EBB9.7000504@uni-bremen.de> <20130730191943.49f8070c@skate>
 <20130730183610.GT24782@lunn.ch> <51F814A0.2050403@uni-bremen.de>
 <20130730232316.10dc7019@skate> <20130731111414.47e7670b@skate>
 <51F8DC3A.6010007@uni-bremen.de> <20130731115108.21c043fd@skate>
Message-ID: <51F8F7E3.9090404@uni-bremen.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org


Am 31.07.2013 11:51, schrieb Thomas Petazzoni:
> Dear Finn Hoffmann,
>
> On Wed, 31 Jul 2013 11:43:22 +0200, Finn Hoffmann wrote:
>
>> Hi Thomas,
>> here you are.
>> Network is working.
> Excellent, thanks!
>
>> # cat /sys/kernel/debug/mvebu-mbus/devices
>> [00] 00000000e8010000 - 00000000e8020000 : pcie0.0 (remap
>> 0000000000010000) [01] disabled
>> [02] disabled
>> [03] disabled
>> [04] 00000000f4000000 - 00000000f4010000 : nand
>> [05] 00000000f5000000 - 00000000f5010000 : sram
>> [06] 00000000e0000000 - 00000000e0100000 : pcie0.0
>> [07] disabled
> Now this looks good, we have both the PCIe memory and PCIe I/O windows
> created.
>
> I'll clean up the patch and send it, hopefully for the final 3.11.
>
> Thanks again for all your testing!
>
> Best regards,
>
> Thomas
Thomas, thank you for your Work.

I have a question about LED's:
Is it possible to have the powerled blinking while kernel is loading? 
Right now all LED's are turned off when the kernel starts.

I came across one curious thing: With Andrews kernel I had:
$ sensors
adt7476-i2c-0-2e
Adapter: mv64xxx_i2c adapter
in0: +1.82 V (min = +0.00 V, max = +3.31 V)
in1: +1.09 V (min = +0.00 V, max = +2.99 V)
in2: +3.27 V (min = +2.98 V, max = +3.63 V)
in3: +5.12 V (min = +4.53 V, max = +5.52 V)
in4: +11.98 V (min = +0.00 V, max = +15.69 V)
fan1: 4330 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +32.2??C (low = -127.0??C, high = +127.0??C)
(crit = +100.0??C, hyst = +96.0??C)
temp2: +32.5??C (low = -127.0??C, high = +127.0??C)
(crit = +100.0??C, hyst = +96.0??C)
temp3: +41.0??C (low = -127.0??C, high = +127.0??C)
(crit = +100.0??C, hyst = +96.0??C)
cpu0_vid: +0.000 V

normally I have:
# sensors
lm85-i2c-0-2e
Adapter: mv64xxx_i2c adapter
in0: +1.82 V (min = +0.00 V, max = +3.32 V)
Vcore: +1.07 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.25 V (min = +2.97 V, max = +3.63 V)
+5V: +5.05 V (min = +4.50 V, max = +5.50 V)
+12V: +12.12 V (min = +0.00 V, max = +15.94 V)
fan1: 2480 RPM (min = 0 RPM)
temp1: +35.0?C (low = -127.0?C, high = +127.0?C)
temp2: +34.0?C (low = -127.0?C, high = +127.0?C)
temp3: +47.0?C (low = -127.0?C, high = +127.0?C)