Re: How do I receive vlan tags on an AF_PACKET socket in 3.4 kernel?

[Daniel Borkmann <dborkman@redhat.com>]

On 07/31/2013 04:36 PM, Ronny Meeus wrote:
> On Wed, Jul 31, 2013 at 4:16 PM, Eric Dumazet <eric.dumazet@gmail.com> wrote:
>> On Wed, 2013-07-31 at 14:51 +0200, Ronny Meeus wrote:
>>
>>> Thanks for the feedback. High level it is almost clear.
>>>
>>> At implementation level I do not understand how it is supposed to work.
>>> If I use tcpdump to generate a filter for example on vlan 4094 I see
>>> no reference at all to the newly added instructions to get the VLAN.
>>>
>>> ~ # tcpdump -i eth-ntb vlan 4094 -d
>>> tcpdump: WARNING: eth-ntb: no IPv4 address assigned
>>> (000) ldh      [12]
>>> (001) jeq      #0x8100          jt 3    jf 2
>>> (002) jeq      #0x9100          jt 3    jf 7
>>> (003) ldh      [14]
>>> (004) and      #0xfff
>>> (005) jeq      #0xffe           jt 6    jf 7
>>> (006) ret      #65535
>>> (007) ret      #0
>>>
>>> To me it looks like to code above is just checking the bytes in the
>>> raw Ethernet packet at offset 12 and 14.
>>> Since the command above seems to work it looks to me that the
>>> filtering is done in the tcpdump application instead of in the kernel.
>>>
>>> If I use the strace command while starting tcpdump I see that the
>>> SO_ATTACH_FILTER sockopt is passed to the kernel:
>>>
>>> <snip>
>>> setsockopt(3, SOL_SOCKET, SO_ATTACH_FILTER, "\0\1\0\0\20\f\366\340", 8) = 0
>>> fcntl64(3, F_GETFL)                     = 0x2 (flags O_RDWR)
>>> fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK)  = 0
>>> recvfrom(3, 0x7f6f6630, 1, 32, 0, 0)    = -1 EAGAIN (Resource
>>> temporarily unavailable)
>>> fcntl64(3, F_SETFL, O_RDWR)             = 0
>>> setsockopt(3, SOL_SOCKET, SO_ATTACH_FILTER, "\0\10\0\0\20>\210@", 8) = 0
>>> <snip>
>>>
>>> So I'm confused. I would expect to see some commands to read access
>>> the VLAN field in the additional data and compare it to the VLAN
>>> (4094) I want to filter.
>>
>> I assumed from you initial mail you were using a BPF filter, not
>> libpcap, which presumably doesnt use these new 'instructions'
>
> I used the tcpdump tool to generate the filter I need to use in my application.
>
>> Adapting the BPF filter generated by libpcap is a matter of adding 3 or
>> 4 instructions. In your case 2 instructions actually
>>
>> One to load tag id into A
>> One to compare A against immediate value 4094 and conditional jump.
>
> Can you give an real example of a filter that passes all packets that
> have a VLAN 4094 attached and drops all others?

You can use bpfc (git://github.com/borkmann/netsniff-ng.git), it also has
an extensive man page. That should probably do it:

$ cat foo
ld vlant
jneq #4094, drop
ret #-1
drop: ret #0

$ bpfc foo
{ 0x20, 0, 0, 0xfffff02c },
{ 0x15, 0, 1, 0x00000ffe },
{ 0x6, 0, 0, 0xffffffff },
{ 0x6, 0, 0, 0x00000000 },