From: "Michael Kerrisk (man-pages)" <mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Peter Schiffer <pschiffe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Michael Kerrisk
<mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-man <linux-man-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH] proc.5: Document /proc/[pid]/io file
Date: Thu, 01 Aug 2013 13:39:52 +0200 [thread overview]
Message-ID: <51FA4908.2040907@gmail.com> (raw)
In-Reply-To: <51F7DAB3.30008-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On 07/30/13 17:24, Peter Schiffer wrote:
> Attempt to document fields in the /proc/[pid]/io file, based on the
> Documentation/filesystems/proc.txt. The text will probably need some
> grammar corrections.
Hi Peter,
Thanks for the patch. But, not that your mailer munged the
patch, so I had to fix by hand. I've applied it.
Thanks,
Michael
> Signed-off-by: Peter Schiffer <pschiffe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
> man5/proc.5 | 95
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 91 insertions(+), 4 deletions(-)
>
> diff --git a/man5/proc.5 b/man5/proc.5
> index 375a131..6fd4543 100644
> --- a/man5/proc.5
> +++ b/man5/proc.5
> @@ -59,7 +59,7 @@
> .\" to see what information could be imported from that file
> .\" into this file.
> .\"
> -.TH PROC 5 2013-06-27 "Linux" "Linux Programmer's Manual"
> +.TH PROC 5 2013-07-30 "Linux" "Linux Programmer's Manual"
> .SH NAME
> proc \- process information pseudo-file system
> .SH DESCRIPTION
> @@ -350,9 +350,96 @@ file access mode and file status flags (see
> .BR open (2)).
>
> The files in this directory are readable only by the owner of the process.
> -.\" FIXME document /proc/[pid]/io
> -.\" .TP
> -.\" .IR /proc/[pid]/io " (since kernel 2.6.20)"
> +.TP
> +.IR /proc/[pid]/io " (since kernel 2.6.20)"
> +This file contains IO statistics for each running process, for example:
> +.in +4n
> +.nf
> +
> +.RB "#" " cat /proc/3828/io"
> +rchar: 323934931
> +wchar: 323929600
> +syscr: 632687
> +syscw: 632675
> +read_bytes: 0
> +write_bytes: 323932160
> +cancelled_write_bytes: 0
> +.fi
> +.in
> +
> +The fields are as follows:
> +.RS
> +.IP * 2
> +.IR rchar :
> +chars read
> +
> +The number of bytes which this task has caused to be read from storage.
> +This is simply the sum of bytes which this process passed to
> +.BR read (2)
> +and
> +.BR pread (2).
> +It includes things like tty IO and it is unaffected by whether or not
> actual
> +physical disk IO was required (the read might have been satisfied from
> +pagecache).
> +.IP *
> +.IR wchar :
> +chars written
> +
> +The number of bytes which this task has caused, or shall cause to be
> written
> +to disk.
> +Similar caveats apply here as with
> +.IR rchar .
> +.IP *
> +.IR syscr :
> +read syscalls
> +
> +Attempt to count the number of read I/O operations, i.e. syscalls like
> +.BR read (2)
> +and
> +.BR pread (2).
> +.IP *
> +.IR syscw :
> +write syscalls
> +
> +Attempt to count the number of write I/O operations, i.e. syscalls like
> +.BR write (2)
> +and
> +.BR pwrite (2).
> +.IP *
> +.IR read_bytes :
> +bytes read
> +
> +Attempt to count the number of bytes which this process really did cause to
> +be fetched from the storage layer.
> +This is accurate for block-backed filesystems.
> +.IP *
> +.IR write_bytes :
> +bytes written
> +
> +Attempt to count the number of bytes which this process caused to be
> sent to
> +the storage layer.
> +.IP *
> +.IR cancelled_write_bytes :
> +
> +The big inaccuracy here is truncate.
> +If a process writes 1MB to a file and then deletes the file,
> +it will in fact perform no writeout.
> +But it will have been accounted as having caused 1MB of write.
> +In other words: this field represents number of bytes which this process
> +caused to not happen, by truncating pagecache.
> +A task can cause "negative" IO too.
> +If this task truncates some dirty pagecache,
> +some IO which another task has been accounted for
> +(in its write_bytes) will not be happening.
> +.IP
> +.IR Note :
> +
> +At its current implementation state, this is a bit racy on 32-bit systems:
> +if process A reads process B's
> +.I /proc/[pid]/io
> +while process B is updating one of those 64-bit counters,
> +process A could see an intermediate result.
> +.RE
> .TP
> .IR /proc/[pid]/limits " (since kernel 2.6.24)"
> This file displays the soft limit, hard limit, and units of measurement
>
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2013-08-01 11:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-30 15:24 [PATCH] proc.5: Document /proc/[pid]/io file Peter Schiffer
[not found] ` <51F7DAB3.30008-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2013-08-01 11:39 ` Michael Kerrisk (man-pages) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51FA4908.2040907@gmail.com \
--to=mtk.manpages-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=linux-man-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pschiffe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.