fsl-image-gui setup eth0 static

[Joerg Boge <joerg.boge@gmx.de>]

[-- Attachment #1: Type: text/plain, Size: 1321 bytes --]

I want to have static ip

so i changed /etc/network/interfaces

    # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

    # The loopback interface
    auto lo
    iface lo inet loopback

    # Wireless interfaces
    iface wlan0 inet dhcp
             wireless_mode managed
             wireless_essid any
             wpa-driver wext
             wpa-conf /etc/wpa_supplicant.conf

    iface atml0 inet dhcp

    # Wired or wireless interfaces
    auto eth0
    iface eth0 inet static
             address 192.168.2.8
             netmask 255.255.255.0
             network 192.168.2.254
             gateway 192.168.2.1
    iface eth1 inet dhcp

    # Ethernet/RNDIS gadget (g_ether)
    # ... or on host side, usbnet and random hwaddr
    iface usb0 inet static
             address 192.168.7.2
             netmask 255.255.255.0
             network 192.168.7.0
             gateway 192.168.7.1

    # Bluetooth networking
    iface bnep0 inet dhcp



do  ifdown eth0
       ifup eth0

and I can connect to static ip

after reboot   there is no connection to the static ip possible  and a 
_new_ dynamic ip is taken via dhcp.

i do ifdown and ifup again. now i can connect via ssh to static and the 
dynamic ip.

that is normal?


Joerg


[-- Attachment #2: Type: text/html, Size: 2385 bytes --]