fsl-image-gui setup eth0 static

fsl-image-gui setup eth0 static

[Joerg Boge]

[-- Attachment #1: Type: text/plain, Size: 1321 bytes --]

I want to have static ip

so i changed /etc/network/interfaces

    # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

    # The loopback interface
    auto lo
    iface lo inet loopback

    # Wireless interfaces
    iface wlan0 inet dhcp
             wireless_mode managed
             wireless_essid any
             wpa-driver wext
             wpa-conf /etc/wpa_supplicant.conf

    iface atml0 inet dhcp

    # Wired or wireless interfaces
    auto eth0
    iface eth0 inet static
             address 192.168.2.8
             netmask 255.255.255.0
             network 192.168.2.254
             gateway 192.168.2.1
    iface eth1 inet dhcp

    # Ethernet/RNDIS gadget (g_ether)
    # ... or on host side, usbnet and random hwaddr
    iface usb0 inet static
             address 192.168.7.2
             netmask 255.255.255.0
             network 192.168.7.0
             gateway 192.168.7.1

    # Bluetooth networking
    iface bnep0 inet dhcp



do  ifdown eth0
       ifup eth0

and I can connect to static ip

after reboot   there is no connection to the static ip possible  and a 
_new_ dynamic ip is taken via dhcp.

i do ifdown and ifup again. now i can connect via ssh to static and the 
dynamic ip.

that is normal?


Joerg


[-- Attachment #2: Type: text/html, Size: 2385 bytes --]

Re: fsl-image-gui setup eth0 static

[Otavio Salvador]

On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <joerg.boge@gmx.de> wrote:
> I want to have static ip
>
> so i changed /etc/network/interfaces
>
> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>
> # The loopback interface
> auto lo
> iface lo inet loopback
>
> # Wireless interfaces
> iface wlan0 inet dhcp
>         wireless_mode managed
>         wireless_essid any
>         wpa-driver wext
>         wpa-conf /etc/wpa_supplicant.conf
>
> iface atml0 inet dhcp
>
> # Wired or wireless interfaces
> auto eth0
> iface eth0 inet static
>         address 192.168.2.8
>         netmask 255.255.255.0
>         network 192.168.2.254
>         gateway 192.168.2.1
> iface eth1 inet dhcp
>
> # Ethernet/RNDIS gadget (g_ether)
> # ... or on host side, usbnet and random hwaddr
> iface usb0 inet static
>         address 192.168.7.2
>         netmask 255.255.255.0
>         network 192.168.7.0
>         gateway 192.168.7.1
>
> # Bluetooth networking
> iface bnep0 inet dhcp
>
>
>
> do  ifdown eth0
>       ifup eth0
>
> and I can connect to static ip
>
> after reboot   there is no connection to the static ip possible  and a new
> dynamic ip is taken via dhcp.
>
> i do ifdown and ifup again. now i can connect via ssh to static and the
> dynamic ip.
>
> that is normal?

Yes and no.

fsl-image-gui is using connman for network management so you need to
set IP there. Please make your own image for specific needs as this
one is not intended to be used for long time but just as testing/demo.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: fsl-image-gui setup eth0 static

[Joerg Boge]

On 08/04/2013 09:09 PM, Otavio Salvador wrote:
> On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <joerg.boge@gmx.de> wrote:
>> I want to have static ip
>>
>> so i changed /etc/network/interfaces
>>
>> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>>
>> # The loopback interface
>> auto lo
>> iface lo inet loopback
>>
>> # Wireless interfaces
>> iface wlan0 inet dhcp
>>          wireless_mode managed
>>          wireless_essid any
>>          wpa-driver wext
>>          wpa-conf /etc/wpa_supplicant.conf
>>
>> iface atml0 inet dhcp
>>
>> # Wired or wireless interfaces
>> auto eth0
>> iface eth0 inet static
>>          address 192.168.2.8
>>          netmask 255.255.255.0
>>          network 192.168.2.254
>>          gateway 192.168.2.1
>> iface eth1 inet dhcp
>>
>> # Ethernet/RNDIS gadget (g_ether)
>> # ... or on host side, usbnet and random hwaddr
>> iface usb0 inet static
>>          address 192.168.7.2
>>          netmask 255.255.255.0
>>          network 192.168.7.0
>>          gateway 192.168.7.1
>>
>> # Bluetooth networking
>> iface bnep0 inet dhcp
>>
>>
>>
>> do  ifdown eth0
>>        ifup eth0
>>
>> and I can connect to static ip
>>
>> after reboot   there is no connection to the static ip possible  and a new
>> dynamic ip is taken via dhcp.
>>
>> i do ifdown and ifup again. now i can connect via ssh to static and the
>> dynamic ip.
>>
>> that is normal?
> Yes and no.
>
> fsl-image-gui is using connman for network management so you need to
> set IP there. Please make your own image for specific needs as this
> one is not intended to be used for long time but just as testing/demo.
>
I waiting for Task #10 - How to create a custom layer  from Yocto 
Training Home ;)

Re: fsl-image-gui setup eth0 static

[Daiane Angolini]

On 08/04/2013 04:45 PM, Joerg Boge wrote:
> On 08/04/2013 09:09 PM, Otavio Salvador wrote:
>> On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <joerg.boge@gmx.de> wrote:
>>> I want to have static ip
>>>
>>> so i changed /etc/network/interfaces
>>>
>>> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>>>
>>> # The loopback interface
>>> auto lo
>>> iface lo inet loopback
>>>
>>> # Wireless interfaces
>>> iface wlan0 inet dhcp
>>>          wireless_mode managed
>>>          wireless_essid any
>>>          wpa-driver wext
>>>          wpa-conf /etc/wpa_supplicant.conf
>>>
>>> iface atml0 inet dhcp
>>>
>>> # Wired or wireless interfaces
>>> auto eth0
>>> iface eth0 inet static
>>>          address 192.168.2.8
>>>          netmask 255.255.255.0
>>>          network 192.168.2.254
>>>          gateway 192.168.2.1
>>> iface eth1 inet dhcp
>>>
>>> # Ethernet/RNDIS gadget (g_ether)
>>> # ... or on host side, usbnet and random hwaddr
>>> iface usb0 inet static
>>>          address 192.168.7.2
>>>          netmask 255.255.255.0
>>>          network 192.168.7.0
>>>          gateway 192.168.7.1
>>>
>>> # Bluetooth networking
>>> iface bnep0 inet dhcp
>>>
>>>
>>>
>>> do  ifdown eth0
>>>        ifup eth0
>>>
>>> and I can connect to static ip
>>>
>>> after reboot   there is no connection to the static ip possible  and
>>> a new
>>> dynamic ip is taken via dhcp.
>>>
>>> i do ifdown and ifup again. now i can connect via ssh to static and the
>>> dynamic ip.
>>>
>>> that is normal?
>> Yes and no.
>>
>> fsl-image-gui is using connman for network management so you need to
>> set IP there. Please make your own image for specific needs as this
>> one is not intended to be used for long time but just as testing/demo.
>>
> I waiting for Task #10 - How to create a custom layer  from Yocto
> Training Home ;)
>

I'm baking it right now :D

If you have other topic idea, please, let me know
-- 
Daiane

Re: fsl-image-gui setup eth0 static

[Joerg boge]

Am 05.08.2013 18:22, schrieb Daiane Angolini:
> On 08/04/2013 04:45 PM, Joerg Boge wrote:
>> On 08/04/2013 09:09 PM, Otavio Salvador wrote:
>>> On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <joerg.boge@gmx.de> wrote:
>>>> I want to have static ip
>>>>
>>>> so i changed /etc/network/interfaces
>>>>
>>>> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>>>>
>>>> # The loopback interface
>>>> auto lo
>>>> iface lo inet loopback
>>>>
>>>> # Wireless interfaces
>>>> iface wlan0 inet dhcp
>>>>          wireless_mode managed
>>>>          wireless_essid any
>>>>          wpa-driver wext
>>>>          wpa-conf /etc/wpa_supplicant.conf
>>>>
>>>> iface atml0 inet dhcp
>>>>
>>>> # Wired or wireless interfaces
>>>> auto eth0
>>>> iface eth0 inet static
>>>>          address 192.168.2.8
>>>>          netmask 255.255.255.0
>>>>          network 192.168.2.254
>>>>          gateway 192.168.2.1
>>>> iface eth1 inet dhcp
>>>>
>>>> # Ethernet/RNDIS gadget (g_ether)
>>>> # ... or on host side, usbnet and random hwaddr
>>>> iface usb0 inet static
>>>>          address 192.168.7.2
>>>>          netmask 255.255.255.0
>>>>          network 192.168.7.0
>>>>          gateway 192.168.7.1
>>>>
>>>> # Bluetooth networking
>>>> iface bnep0 inet dhcp
>>>>
>>>>
>>>>
>>>> do  ifdown eth0
>>>>        ifup eth0
>>>>
>>>> and I can connect to static ip
>>>>
>>>> after reboot   there is no connection to the static ip possible  and
>>>> a new
>>>> dynamic ip is taken via dhcp.
>>>>
>>>> i do ifdown and ifup again. now i can connect via ssh to static and 
>>>> the
>>>> dynamic ip.
>>>>
>>>> that is normal?
>>> Yes and no.
>>>
>>> fsl-image-gui is using connman for network management so you need to
>>> set IP there. Please make your own image for specific needs as this
>>> one is not intended to be used for long time but just as testing/demo.
>>>
>> I waiting for Task #10 - How to create a custom layer  from Yocto
>> Training Home ;)
>>
>
> I'm baking it right now :D
>
> If you have other topic idea, please, let me know
A How to create machine layer will be useful

Good baking ;)

Joerg

Re: fsl-image-gui setup eth0 static

[Joerg Boge]

On 08/04/2013 09:09 PM, Otavio Salvador wrote:
> On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <joerg.boge@gmx.de> wrote:
>> I want to have static ip
>>
>> so i changed /etc/network/interfaces
>>
>> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>>
>> # The loopback interface
>> auto lo
>> iface lo inet loopback
>>
>> # Wireless interfaces
>> iface wlan0 inet dhcp
>>          wireless_mode managed
>>          wireless_essid any
>>          wpa-driver wext
>>          wpa-conf /etc/wpa_supplicant.conf
>>
>> iface atml0 inet dhcp
>>
>> # Wired or wireless interfaces
>> auto eth0
>> iface eth0 inet static
>>          address 192.168.2.8
>>          netmask 255.255.255.0
>>          network 192.168.2.254
>>          gateway 192.168.2.1
>> iface eth1 inet dhcp
>>
>> # Ethernet/RNDIS gadget (g_ether)
>> # ... or on host side, usbnet and random hwaddr
>> iface usb0 inet static
>>          address 192.168.7.2
>>          netmask 255.255.255.0
>>          network 192.168.7.0
>>          gateway 192.168.7.1
>>
>> # Bluetooth networking
>> iface bnep0 inet dhcp
>>
>>
>>
>> do  ifdown eth0
>>        ifup eth0
>>
>> and I can connect to static ip
>>
>> after reboot   there is no connection to the static ip possible  and a new
>> dynamic ip is taken via dhcp.
>>
>> i do ifdown and ifup again. now i can connect via ssh to static and the
>> dynamic ip.
>>
>> that is normal?
> Yes and no.
>
> fsl-image-gui is using connman for network management so you need to
> set IP there. Please make your own image for specific needs as this
> one is not intended to be used for long time but just as testing/demo.
>

I goggled something out about connman.

So to set up it with static ip "connman-tests" are needed

so will be nice it will be added in the future

Re: fsl-image-gui setup eth0 static

[Otavio Salvador]

On Sun, Aug 4, 2013 at 6:10 PM, Joerg Boge <joerg.boge@gmx.de> wrote:
> On 08/04/2013 09:09 PM, Otavio Salvador wrote:
>>
>> On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <joerg.boge@gmx.de> wrote:
>>>
>>> I want to have static ip
>>>
>>> so i changed /etc/network/interfaces
>>>
>>> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>>>
>>> # The loopback interface
>>> auto lo
>>> iface lo inet loopback
>>>
>>> # Wireless interfaces
>>> iface wlan0 inet dhcp
>>>          wireless_mode managed
>>>          wireless_essid any
>>>          wpa-driver wext
>>>          wpa-conf /etc/wpa_supplicant.conf
>>>
>>> iface atml0 inet dhcp
>>>
>>> # Wired or wireless interfaces
>>> auto eth0
>>> iface eth0 inet static
>>>          address 192.168.2.8
>>>          netmask 255.255.255.0
>>>          network 192.168.2.254
>>>          gateway 192.168.2.1
>>> iface eth1 inet dhcp
>>>
>>> # Ethernet/RNDIS gadget (g_ether)
>>> # ... or on host side, usbnet and random hwaddr
>>> iface usb0 inet static
>>>          address 192.168.7.2
>>>          netmask 255.255.255.0
>>>          network 192.168.7.0
>>>          gateway 192.168.7.1
>>>
>>> # Bluetooth networking
>>> iface bnep0 inet dhcp
>>>
>>>
>>>
>>> do  ifdown eth0
>>>        ifup eth0
>>>
>>> and I can connect to static ip
>>>
>>> after reboot   there is no connection to the static ip possible  and a
>>> new
>>> dynamic ip is taken via dhcp.
>>>
>>> i do ifdown and ifup again. now i can connect via ssh to static and the
>>> dynamic ip.
>>>
>>> that is normal?
>>
>> Yes and no.
>>
>> fsl-image-gui is using connman for network management so you need to
>> set IP there. Please make your own image for specific needs as this
>> one is not intended to be used for long time but just as testing/demo.
>>
>
> I goggled something out about connman.
>
> So to set up it with static ip "connman-tests" are needed
>
> so will be nice it will be added in the future

You can do it in the GUI AFAIK.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750