Re: fsl-image-gui setup eth0 static

[Joerg boge <joerg.boge@gmx.de>]

Am 05.08.2013 18:22, schrieb Daiane Angolini:
> On 08/04/2013 04:45 PM, Joerg Boge wrote:
>> On 08/04/2013 09:09 PM, Otavio Salvador wrote:
>>> On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <joerg.boge@gmx.de> wrote:
>>>> I want to have static ip
>>>>
>>>> so i changed /etc/network/interfaces
>>>>
>>>> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>>>>
>>>> # The loopback interface
>>>> auto lo
>>>> iface lo inet loopback
>>>>
>>>> # Wireless interfaces
>>>> iface wlan0 inet dhcp
>>>>          wireless_mode managed
>>>>          wireless_essid any
>>>>          wpa-driver wext
>>>>          wpa-conf /etc/wpa_supplicant.conf
>>>>
>>>> iface atml0 inet dhcp
>>>>
>>>> # Wired or wireless interfaces
>>>> auto eth0
>>>> iface eth0 inet static
>>>>          address 192.168.2.8
>>>>          netmask 255.255.255.0
>>>>          network 192.168.2.254
>>>>          gateway 192.168.2.1
>>>> iface eth1 inet dhcp
>>>>
>>>> # Ethernet/RNDIS gadget (g_ether)
>>>> # ... or on host side, usbnet and random hwaddr
>>>> iface usb0 inet static
>>>>          address 192.168.7.2
>>>>          netmask 255.255.255.0
>>>>          network 192.168.7.0
>>>>          gateway 192.168.7.1
>>>>
>>>> # Bluetooth networking
>>>> iface bnep0 inet dhcp
>>>>
>>>>
>>>>
>>>> do  ifdown eth0
>>>>        ifup eth0
>>>>
>>>> and I can connect to static ip
>>>>
>>>> after reboot   there is no connection to the static ip possible  and
>>>> a new
>>>> dynamic ip is taken via dhcp.
>>>>
>>>> i do ifdown and ifup again. now i can connect via ssh to static and 
>>>> the
>>>> dynamic ip.
>>>>
>>>> that is normal?
>>> Yes and no.
>>>
>>> fsl-image-gui is using connman for network management so you need to
>>> set IP there. Please make your own image for specific needs as this
>>> one is not intended to be used for long time but just as testing/demo.
>>>
>> I waiting for Task #10 - How to create a custom layer  from Yocto
>> Training Home ;)
>>
>
> I'm baking it right now :D
>
> If you have other topic idea, please, let me know
A How to create machine layer will be useful

Good baking ;)

Joerg