From: Taras Kondratiuk <taras@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/4] ARM: OMAP4470: Add Elpida EDB8164B3PF memory configuration
Date: Tue, 6 Aug 2013 18:57:56 +0300 [thread overview]
Message-ID: <52011D04.5040802@ti.com> (raw)
In-Reply-To: <52010673.30106@ti.com>
On 08/06/2013 05:21 PM, Lokesh Vutla wrote:
> Hi Taras,
> On Tuesday 06 August 2013 05:48 PM, Taras Kondratiuk wrote:
>> From: Lubomir Popov <lpopov@mm-sol.com>
>>
>> OMAP4470 SDP SoM has EDB8164B3PF PoP memory on board.
>> This memory has 4Gb x 2CS = 8Gb configuration.
>> Add configuration for runtime calculation and precalculated cases.
>>
>> Patch is based on a draft Lubomir's patch [1].
>>
>> [1] http://lists.denx.de/pipermail/u-boot/2013-April/150851.html
> Just curious to know, Have you tried SDRAM_AUTO_DETECTION ?
> Rest looks fine to me.
If you mean SYS_AUTOMATIC_SDRAM_DETECTION then yes I've tried it and it
works.
The only minor issue is that detection is called twice during boot:
for dmm_init() and for do_sdram_init().
In case you need additional details I've put boot log with debug enabled
below.
U-Boot SPL 2013.07-00116-gd7325e5-dirty (Aug 06 2013 - 18:20:56)
OMAP4470 ES1.0
>>sdram_init()
in_sdram = 0
get_mr: EMIF1 cs 0 mr 00000000 val 0x0
get_mr: EMIF1 cs 0 mr 00000004 val 0x3
get_mr: EMIF1 cs 0 mr 00000005 val 0x3
get_mr: EMIF1 cs 0 mr 00000006 val 0x0
get_mr: EMIF1 cs 0 mr 00000007 val 0x0
get_mr: EMIF1 cs 0 mr 00000008 val 0x18
EMIF1 CS0 Elpida LPDDR2-S4 512 MB
get_mr: EMIF1 cs 1 mr 80000000 val 0x3
get_mr: EMIF2 cs 0 mr 00000000 val 0x0
get_mr: EMIF2 cs 0 mr 00000004 val 0x3
get_mr: EMIF2 cs 0 mr 00000005 val 0x3
get_mr: EMIF2 cs 0 mr 00000006 val 0x0
get_mr: EMIF2 cs 0 mr 00000007 val 0x0
get_mr: EMIF2 cs 0 mr 00000008 val 0x18
EMIF2 CS0 Elpida LPDDR2-S4 512 MB
get_mr: EMIF2 cs 1 mr 80000000 val 0x3
emif1_size 0x20000000 emif2_size 0x20000000
>>do_sdram_init() 4c000000
get_mr: EMIF1 cs 0 mr 00000000 val 0x0
get_mr: EMIF1 cs 0 mr 00000004 val 0x3
get_mr: EMIF1 cs 0 mr 00000005 val 0x3
get_mr: EMIF1 cs 0 mr 00000006 val 0x0
get_mr: EMIF1 cs 0 mr 00000007 val 0x0
get_mr: EMIF1 cs 0 mr 00000008 val 0x18
EMIF1 CS0 Elpida LPDDR2-S4 512 MB
get_mr: EMIF1 cs 1 mr 80000000 val 0x3
emif: timings table: 400000000
emif: addressing table index 6
regs->sdram_config_init - 0x80000eb2
regs->sdram_config - 0x80001ab2
regs->ref_ctrl - 0x00000618
regs->sdram_tim1 - 0x10eb0662
regs->sdram_tim2 - 0x20370dd2
regs->sdram_tim3 - 0x00b1c33f
regs->read_idle_ctrl - 0x000501ff
regs->temp_alert_config - 0x58016893
regs->zq_config - 0x500b3214
regs->emif_ddr_phy_ctlr_1 - 0x049ff418
regs->emif_ddr_phy_ctlr_1_init - 0x049ffff5
get_mr: EMIF1 cs 0 mr 00000000 val 0x0
<<do_sdram_init() 4c000000
>>do_sdram_init() 4d000000
get_mr: EMIF2 cs 0 mr 00000000 val 0x0
get_mr: EMIF2 cs 0 mr 00000004 val 0x3
get_mr: EMIF2 cs 0 mr 00000005 val 0x3
get_mr: EMIF2 cs 0 mr 00000006 val 0x0
get_mr: EMIF2 cs 0 mr 00000007 val 0x0
get_mr: EMIF2 cs 0 mr 00000008 val 0x18
EMIF2 CS0 Elpida LPDDR2-S4 512 MB
get_mr: EMIF2 cs 1 mr 80000000 val 0x3
emif: timings table: 400000000
emif: addressing table index 6
regs->sdram_config_init - 0x80000eb2
regs->sdram_config - 0x80001ab2
regs->ref_ctrl - 0x00000618
regs->sdram_tim1 - 0x10eb0662
regs->sdram_tim2 - 0x20370dd2
regs->sdram_tim3 - 0x00b1c33f
regs->read_idle_ctrl - 0x000501ff
regs->temp_alert_config - 0x58016893
regs->zq_config - 0x500b3214
regs->emif_ddr_phy_ctlr_1 - 0x049ff418
regs->emif_ddr_phy_ctlr_1_init - 0x049ffff5
get_mr: EMIF2 cs 0 mr 00000000 val 0x0
<<do_sdram_init() 4d000000
get_ram_size() successful<<sdram_init()
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
--
BR
Taras Kondratiuk | GlobalLogic
next prev parent reply other threads:[~2013-08-06 15:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-06 12:18 [U-Boot] [PATCH 0/4] ARM: OMAP4: Add OMAP4470 support Taras Kondratiuk
2013-08-06 12:18 ` [U-Boot] [PATCH 1/4] ARM: OMAP4470: Add OMAP4470 identification Taras Kondratiuk
2013-08-06 12:18 ` [U-Boot] [PATCH 2/4] ARM: OMAP4470: Add voltage and dpll data Taras Kondratiuk
2013-08-06 12:18 ` [U-Boot] [PATCH 3/4] ARM: OMAP4470: Add Elpida EDB8164B3PF memory configuration Taras Kondratiuk
2013-08-06 14:21 ` Lokesh Vutla
2013-08-06 15:57 ` Taras Kondratiuk [this message]
2013-08-06 16:31 ` Lokesh Vutla
2013-08-06 12:18 ` [U-Boot] [PATCH 4/4] ARM: OMAP4460: sdp: Limit TPS mux config to 4460 Taras Kondratiuk
2013-08-28 18:25 ` [U-Boot] [PATCH 0/4] ARM: OMAP4: Add OMAP4470 support Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52011D04.5040802@ti.com \
--to=taras@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.