diff for duplicates of <52027086.1090608@wwwdotorg.org>

diff --git a/a/1.txt b/N1/1.txt
index ec9912a..16c75da 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -7,14 +7,14 @@ On 08/07/2013 03:35 AM, Wei Ni wrote:
 >>>>>>> Adding the power control support to power on/off the vdd rail.
 >>>>>>> And make sure that power is enabled before accessing the device.
 >>>>>>>
->>>>>>> Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
+>>>>>>> Signed-off-by: Wei Ni <wni@nvidia.com>
 >>>>>>> ---
 >>>>>>>   drivers/hwmon/lm90.c |   52 ++++++++++++++++++++++++++++++++++++++++++++++++++
 >>>>>> [...]
 >>>>>>> +	if (!data->lm90_reg) {
 >>>>>>> +		data->lm90_reg = regulator_get(&client->dev, "vdd");
 >>>>>>> +		if (IS_ERR_OR_NULL(data->lm90_reg)) {
->>>>>>> +			if (PTR_ERR(data->lm90_reg) == -ENODEV)
+>>>>>>> +			if (PTR_ERR(data->lm90_reg) = -ENODEV)
 >>>>>>> +				dev_info(&client->dev,
 >>>>>>> +					 "No regulator found for vdd. Assuming vdd is always powered.");
 >>>>>>> +			else
@@ -64,3 +64,8 @@ delay is needed, it is.
 
 It's probably working because in your tests the supply just happens to
 be on already.
+
+_______________________________________________
+lm-sensors mailing list
+lm-sensors@lm-sensors.org
+http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
diff --git a/a/content_digest b/N1/content_digest
index 0a03910..55bf951 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -4,9 +4,9 @@
  "ref\01375865105.562600640@f434.i.mail.ru\0"
  "ref\0520214C9.1010200@nvidia.com\0"
  "ref\0520214C9.1010200-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org\0"
- "From\0Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>\0"
- "Subject\0Re: [PATCH 1/2] hwmon: (lm90) Add power control\0"
- "Date\0Wed, 07 Aug 2013 10:06:30 -0600\0"
+ "From\0Stephen Warren <swarren@wwwdotorg.org>\0"
+ "Subject\0Re: [lm-sensors] [PATCH 1/2] hwmon: (lm90) Add power control\0"
+ "Date\0Wed, 07 Aug 2013 16:06:30 +0000\0"
  "To\0Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\0"
  "Cc\0Alexander Shiyan <shc_work-JGs/UdohzUI@public.gmane.org>"
   Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
@@ -27,14 +27,14 @@
  ">>>>>>> Adding the power control support to power on/off the vdd rail.\n"
  ">>>>>>> And make sure that power is enabled before accessing the device.\n"
  ">>>>>>>\n"
- ">>>>>>> Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\n"
+ ">>>>>>> Signed-off-by: Wei Ni <wni@nvidia.com>\n"
  ">>>>>>> ---\n"
  ">>>>>>>   drivers/hwmon/lm90.c |   52 ++++++++++++++++++++++++++++++++++++++++++++++++++\n"
  ">>>>>> [...]\n"
  ">>>>>>> +\tif (!data->lm90_reg) {\n"
  ">>>>>>> +\t\tdata->lm90_reg = regulator_get(&client->dev, \"vdd\");\n"
  ">>>>>>> +\t\tif (IS_ERR_OR_NULL(data->lm90_reg)) {\n"
- ">>>>>>> +\t\t\tif (PTR_ERR(data->lm90_reg) == -ENODEV)\n"
+ ">>>>>>> +\t\t\tif (PTR_ERR(data->lm90_reg) = -ENODEV)\n"
  ">>>>>>> +\t\t\t\tdev_info(&client->dev,\n"
  ">>>>>>> +\t\t\t\t\t \"No regulator found for vdd. Assuming vdd is always powered.\");\n"
  ">>>>>>> +\t\t\telse\n"
@@ -83,6 +83,11 @@
  "delay is needed, it is.\n"
  "\n"
  "It's probably working because in your tests the supply just happens to\n"
- be on already.
+ "be on already.\n"
+ "\n"
+ "_______________________________________________\n"
+ "lm-sensors mailing list\n"
+ "lm-sensors@lm-sensors.org\n"
+ http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
 
-0257b48fe9a4d7bb600606664fa2e2558b668ff10795593993688770e08b8d53
+877c7c4071c9fb702299fe854547a101b45305997e472bd9c6509d9273d5616a
