From: Guenter Roeck <linux@roeck-us.net>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] Unsuported ITE chipset 0x8771
Date: Thu, 08 Aug 2013 05:19:17 +0000 [thread overview]
Message-ID: <52032A55.40309@roeck-us.net> (raw)
In-Reply-To: <6CFD278BAABA444AAA6A1BAC172498CD@adminDator>
On 08/07/2013 09:41 PM, Sebastian Sjoholm wrote:
> Hi,
>
> I was reading the old post regarding the unsupported ITE chipset, and did a printout from my boards as well, I don't know if it helps.
>
Experimental support for IT8771E and IT8772E was added to the it87 driver
with Linux version 3.9. What kernel version are you running ?
Thanks,
Guenter
> # isadump -k 0x87,0x01,0x55,0x55 0x2e 0x2f 4
> WARNING! Running this program can cause system crashes, data loss and worse!
> I will probe address register 0x2e and data register 0x2f.
> Probing bank 4 using bank register 0x07.
> Continue? [Y/n] y
> 0 1 2 3 4 5 6 7 8 9 a b c d e f
> 00: 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 87 71 00 00 00 00 ff 0e 22 82 00 40 03 00 00 00
> 30: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 02 90 02 30 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 02 00 00 04 04 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 40 00 00 20 00 f0 00 01 00 00 00 00 00 00 00
> # isadump 0x295 0x296
> WARNING! Running this program can cause system crashes, data loss and worse!
> I will probe address register 0x295 and data register 0x296.
> Continue? [Y/n] y
> 0 1 2 3 4 5 6 7 8 9 a b c d e f
> 00: 19 02 ff 01 37 ff 07 37 ff 07 49 0f 00 82 ff 00
> 10: ff d2 5f 3b c7 80 00 00 00 ff 00 ff 9f 6f 6f 6f
> 20: 2f ba f2 8a ba f4 ba 8d 88 35 2e f8 80 f0 00 00
> 30: 7f fe af ef 0e 9f b9 ff 0d df 7b 2f 7e 78 ae 9f
> 40: df eb 6f b5 fd fc 5f 40 ad 6a d4 00 ff ff ff ff
> 50: ff 38 7f 7f 7f 40 00 00 90 00 01 12 60 00 00 00
> 60: 00 14 46 6a 14 41 0f ff 00 7f 7f ff 00 00 0f ff
> 70: 7f 7f 7f 80 00 00 0f ff ff ff ff ff ff ff ff ff
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 3c 02 04
> 90: ff 00 00 00 ff 00 00 00 40 00 00 00 00 b6 02 20
> a0: fb f7 f7 f7 f7 f7 f7 ff ff ff ff ff ff ff ff ff
> b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> # modprobe it87 force_id=0x8721
> # sensors
> radeon-pci-0008
> Adapter: PCI adapter
> temp1: +62.0°C
>
> k10temp-pci-00c3
> Adapter: PCI adapter
> temp1: +62.5°C (high = +70.0°C)
> (crit = +100.0°C, hyst = +97.0°C)
>
> it8721-isa-0290
> Adapter: ISA adapter
> in0: +0.56 V (min = +3.05 V, max = +1.52 V) ALARM
> in1: +2.23 V (min = +2.87 V, max = +2.10 V) ALARM
> in2: +2.90 V (min = +1.91 V, max = +0.17 V) ALARM
> +3.3V: +3.31 V (min = +0.00 V, max = +4.44 V) ALARM
> in4: +2.23 V (min = +2.68 V, max = +0.16 V) ALARM
> in5: +2.92 V (min = +0.56 V, max = +1.48 V) ALARM
> in6: +2.23 V (min = +1.44 V, max = +1.51 V) ALARM
> 3VSB: +3.38 V (min = +3.82 V, max = +4.18 V) ALARM
> Vbat: +3.26 V
> fan1: 5192 RPM (min = 0 RPM)
> fan2: 0 RPM (min = 16 RPM) ALARM
> temp1: +53.0°C (low = -21.0°C, high = -33.0°C) ALARM sensor = thermistor
> temp2: +46.0°C (low = -75.0°C, high = +111.0°C) sensor = thermistor
> temp3: -8.0°C (low = -4.0°C, high = -3.0°C) sensor = thermistor
> intrusion0: OK
>
> I have total 5 of these boards, if requested I can printout from all of them.
>
> Regards,
> Sebastian
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
prev parent reply other threads:[~2013-08-08 5:19 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-10 18:34 [lm-sensors] Unsuported ITE chipset 0x8771 Ask Me
2012-02-13 10:54 ` Tomàs Deltell Bonell
2012-02-13 11:38 ` Tomàs Deltell
2012-02-13 11:38 ` Tomàs Deltell Bonell
2012-02-15 8:19 ` Jean Delvare
2012-02-15 13:08 ` Tomàs Deltell Bonell
2012-02-15 13:55 ` Jean Delvare
2012-02-26 15:50 ` Tomàs Deltell Bonell
2012-03-01 13:21 ` Jean Delvare
2012-07-15 0:18 ` Dennis Hohmann
2012-07-17 1:13 ` Guenter Roeck
2013-08-08 4:41 ` Sebastian Sjoholm
2013-08-08 5:19 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52032A55.40309@roeck-us.net \
--to=linux@roeck-us.net \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.