diff for duplicates of <52036920.4050808@nvidia.com>

diff --git a/a/1.txt b/N1/1.txt
index 5eec74f..f5ec63c 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -4,7 +4,7 @@ On 08/08/2013 04:42 PM, Guenter Roeck wrote:
 >> Adding the power control support to power on/off the vdd rail.
 >> And make sure that power is enabled before accessing the device.
 >>
->> Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
+>> Signed-off-by: Wei Ni <wni@nvidia.com>
 >> ---
 >>   drivers/hwmon/lm90.c |   49 +++++++++++++++++++++++++++++++++++++++++++++++++
 >>   1 file changed, 49 insertions(+)
@@ -100,7 +100,7 @@ Oh, yes, you are right, I will do it.
 > If the regulator subsystem is not configured, you especially don't need or want
 > to pollute the log with an error message.
 > 
->> +		if (PTR_ERR(data->lm90_reg) == -ENODEV)
+>> +		if (PTR_ERR(data->lm90_reg) = -ENODEV)
 >> +			dev_info(&client->dev,
 >> +				 "No regulator found for vdd. Assuming vdd is always powered.");
 >> +		else
@@ -121,7 +121,7 @@ if (!IS_ERR(data->lm90_reg)) {
         return ret;
     }
 } else {
-    if (PTR_ERR(data->lm90_reg) == -EPROBE_DEFER)
+    if (PTR_ERR(data->lm90_reg) = -EPROBE_DEFER)
         return -EPRPBE_DEFER;
 
         data->lm90_reg = !!IS_ERR(data->lm90_reg);
@@ -143,7 +143,7 @@ error values.
 >> +
 >>   	/* Set the device type */
 >>   	data->kind = id->driver_data;
->>   	if (data->kind == adm1032) {
+>>   	if (data->kind = adm1032) {
 >> @@ -1473,6 +1515,10 @@ exit_remove_files:
 >>   	lm90_remove_files(client, data);
 >>   exit_restore:
@@ -166,4 +166,10 @@ error values.
 >>   	return 0;
 >>   }
 >>
->
+> 
+
+
+_______________________________________________
+lm-sensors mailing list
+lm-sensors@lm-sensors.org
+http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
diff --git a/a/content_digest b/N1/content_digest
index 878d8bd..7e56bee 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -2,9 +2,9 @@
  "ref\01375944991-29182-2-git-send-email-wni@nvidia.com\0"
  "ref\0520359E9.1000600@roeck-us.net\0"
  "ref\0520359E9.1000600-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org\0"
- "From\0Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\0"
- "Subject\0Re: [PATCH v2 1/3] hwmon: (lm90) Add power control\0"
- "Date\0Thu, 8 Aug 2013 17:47:12 +0800\0"
+ "From\0Wei Ni <wni@nvidia.com>\0"
+ "Subject\0Re: [lm-sensors] [PATCH v2 1/3] hwmon: (lm90) Add power control\0"
+ "Date\0Thu, 08 Aug 2013 09:47:12 +0000\0"
  "To\0Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>\0"
  "Cc\0khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>"
   swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
@@ -21,7 +21,7 @@
  ">> Adding the power control support to power on/off the vdd rail.\n"
  ">> And make sure that power is enabled before accessing the device.\n"
  ">>\n"
- ">> Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\n"
+ ">> Signed-off-by: Wei Ni <wni@nvidia.com>\n"
  ">> ---\n"
  ">>   drivers/hwmon/lm90.c |   49 +++++++++++++++++++++++++++++++++++++++++++++++++\n"
  ">>   1 file changed, 49 insertions(+)\n"
@@ -117,7 +117,7 @@
  "> If the regulator subsystem is not configured, you especially don't need or want\n"
  "> to pollute the log with an error message.\n"
  "> \n"
- ">> +\t\tif (PTR_ERR(data->lm90_reg) == -ENODEV)\n"
+ ">> +\t\tif (PTR_ERR(data->lm90_reg) = -ENODEV)\n"
  ">> +\t\t\tdev_info(&client->dev,\n"
  ">> +\t\t\t\t \"No regulator found for vdd. Assuming vdd is always powered.\");\n"
  ">> +\t\telse\n"
@@ -138,7 +138,7 @@
  "        return ret;\n"
  "    }\n"
  "} else {\n"
- "    if (PTR_ERR(data->lm90_reg) == -EPROBE_DEFER)\n"
+ "    if (PTR_ERR(data->lm90_reg) = -EPROBE_DEFER)\n"
  "        return -EPRPBE_DEFER;\n"
  "\n"
  "        data->lm90_reg = !!IS_ERR(data->lm90_reg);\n"
@@ -160,7 +160,7 @@
  ">> +\n"
  ">>   \t/* Set the device type */\n"
  ">>   \tdata->kind = id->driver_data;\n"
- ">>   \tif (data->kind == adm1032) {\n"
+ ">>   \tif (data->kind = adm1032) {\n"
  ">> @@ -1473,6 +1515,10 @@ exit_remove_files:\n"
  ">>   \tlm90_remove_files(client, data);\n"
  ">>   exit_restore:\n"
@@ -183,6 +183,12 @@
  ">>   \treturn 0;\n"
  ">>   }\n"
  ">>\n"
- >
+ "> \n"
+ "\n"
+ "\n"
+ "_______________________________________________\n"
+ "lm-sensors mailing list\n"
+ "lm-sensors@lm-sensors.org\n"
+ http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
 
-a68e409a3711e9700452fe2c04cfd27aa8880886de01da25fb0f905fd03c513f
+1285fcb3a490a297ad8391d36ad52cb09a5a0e70fba16d9bacd9f6d3cbaf6f72
