From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Michael Trimarchi <michael@amarulasolutions.com>
Cc: alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Jarkko Nikula <jarkko.nikula@bitmer.com>
Subject: Re: [RFC PATCH] ASoC: omap-mcbsp: Add support for highter rate up to 384000
Date: Thu, 8 Aug 2013 13:51:25 +0300 [thread overview]
Message-ID: <5203782D.1080008@ti.com> (raw)
In-Reply-To: <20130807182841.GA7823@panicking>
On 08/07/2013 09:28 PM, Michael Trimarchi wrote:
> Add support for highter rate up to 384000Khz. There are codecs in the
> market that can play up to this frequency.
> Test was done just with:
>
> #define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000)
>
> playing wav file 32bit/192000Khz stereo. Some glitch has observed
> but this should depend on the selected min buffer bytes that was
> left untouched in aplay and in the omap-pcm driver.
>
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> ---
> sound/soc/omap/omap-mcbsp.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
> index 7483efb..1e95f6a 100644
> --- a/sound/soc/omap/omap-mcbsp.c
> +++ b/sound/soc/omap/omap-mcbsp.c
> @@ -39,7 +39,9 @@
> #include "mcbsp.h"
> #include "omap-mcbsp.h"
>
> -#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000)
> +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000 | \
I think only this change is enough for what you want to achieve.
> + SNDRV_PCM_RATE_CONTINUOUS | \
> + SNDRV_PCM_RATE_KNOT)
The _KNOT is for sure not needed and I would not set the CONTINUOUS either.
>
> #define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \
> xhandler_get, xhandler_put) \
> @@ -574,11 +576,15 @@ static struct snd_soc_dai_driver omap_mcbsp_dai = {
> .channels_max = 16,
> .rates = OMAP_MCBSP_RATES,
> .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
> + .rate_min = 8000,
> + .rate_max = 384000,
Why you want to limit the rates here?
> },
> .capture = {
> .channels_min = 1,
> .channels_max = 16,
> .rates = OMAP_MCBSP_RATES,
> + .rate_min = 8000,
> + .rate_max = 384000,
Same here, do not set these.
> .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
> },
> .ops = &mcbsp_dai_ops,
>
--
Péter
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2013-08-08 10:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-07 18:28 [RFC PATCH] ASoC: omap-mcbsp: Add support for highter rate up to 384000 Michael Trimarchi
2013-08-08 10:51 ` Peter Ujfalusi [this message]
2013-08-08 11:04 ` Michael Trimarchi
2013-08-09 5:18 ` Peter Ujfalusi
2013-08-09 7:43 ` Michael Trimarchi
2013-08-10 7:53 ` Michael Trimarchi
2013-08-12 15:36 ` Peter Ujfalusi
2013-08-12 15:57 ` Michael Trimarchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5203782D.1080008@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=jarkko.nikula@bitmer.com \
--cc=lgirdwood@gmail.com \
--cc=michael@amarulasolutions.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.