diff for duplicates of <52037F9A.7070802@roeck-us.net>

diff --git a/a/1.txt b/N1/1.txt
index 8deec51..5bfaa15 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -5,7 +5,7 @@ On 08/08/2013 02:47 AM, Wei Ni wrote:
 >>> Adding the power control support to power on/off the vdd rail.
 >>> And make sure that power is enabled before accessing the device.
 >>>
->>> Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
+>>> Signed-off-by: Wei Ni <wni@nvidia.com>
 >>> ---
 >>>    drivers/hwmon/lm90.c |   49 +++++++++++++++++++++++++++++++++++++++++++++++++
 >>>    1 file changed, 49 insertions(+)
@@ -108,7 +108,7 @@ directly in those functions. Again no need for the additional function.
 >> If the regulator subsystem is not configured, you especially don't need or want
 >> to pollute the log with an error message.
 >>
->>> +		if (PTR_ERR(data->lm90_reg) == -ENODEV)
+>>> +		if (PTR_ERR(data->lm90_reg) = -ENODEV)
 >>> +			dev_info(&client->dev,
 >>> +				 "No regulator found for vdd. Assuming vdd is always powered.");
 >>> +		else
@@ -132,7 +132,7 @@ directly in those functions. Again no need for the additional function.
 
 Handle the error in the if case.
 
->      if (PTR_ERR(data->lm90_reg) == -EPROBE_DEFER)
+>      if (PTR_ERR(data->lm90_reg) = -EPROBE_DEFER)
 >          return -EPRPBE_DEFER;
 >
 >          data->lm90_reg = !!IS_ERR(data->lm90_reg);
@@ -159,7 +159,7 @@ Matter of opinion if you want to check for IS_ERR or NULL later on.
 >>> +
 >>>    	/* Set the device type */
 >>>    	data->kind = id->driver_data;
->>>    	if (data->kind == adm1032) {
+>>>    	if (data->kind = adm1032) {
 >>> @@ -1473,6 +1515,10 @@ exit_remove_files:
 >>>    	lm90_remove_files(client, data);
 >>>    exit_restore:
@@ -186,3 +186,9 @@ Matter of opinion if you want to check for IS_ERR or NULL later on.
 >
 >
 >
+
+
+_______________________________________________
+lm-sensors mailing list
+lm-sensors@lm-sensors.org
+http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
diff --git a/a/content_digest b/N1/content_digest
index 518cee7..6297b16 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -3,9 +3,9 @@
  "ref\0520359E9.1000600@roeck-us.net\0"
  "ref\052036920.4050808@nvidia.com\0"
  "ref\052036920.4050808-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org\0"
- "From\0Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>\0"
- "Subject\0Re: [PATCH v2 1/3] hwmon: (lm90) Add power control\0"
- "Date\0Thu, 08 Aug 2013 04:23:06 -0700\0"
+ "From\0Guenter Roeck <linux@roeck-us.net>\0"
+ "Subject\0Re: [lm-sensors] [PATCH v2 1/3] hwmon: (lm90) Add power control\0"
+ "Date\0Thu, 08 Aug 2013 11:23:06 +0000\0"
  "To\0Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\0"
  "Cc\0khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>"
   swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
@@ -23,7 +23,7 @@
  ">>> Adding the power control support to power on/off the vdd rail.\n"
  ">>> And make sure that power is enabled before accessing the device.\n"
  ">>>\n"
- ">>> Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\n"
+ ">>> Signed-off-by: Wei Ni <wni@nvidia.com>\n"
  ">>> ---\n"
  ">>>    drivers/hwmon/lm90.c |   49 +++++++++++++++++++++++++++++++++++++++++++++++++\n"
  ">>>    1 file changed, 49 insertions(+)\n"
@@ -126,7 +126,7 @@
  ">> If the regulator subsystem is not configured, you especially don't need or want\n"
  ">> to pollute the log with an error message.\n"
  ">>\n"
- ">>> +\t\tif (PTR_ERR(data->lm90_reg) == -ENODEV)\n"
+ ">>> +\t\tif (PTR_ERR(data->lm90_reg) = -ENODEV)\n"
  ">>> +\t\t\tdev_info(&client->dev,\n"
  ">>> +\t\t\t\t \"No regulator found for vdd. Assuming vdd is always powered.\");\n"
  ">>> +\t\telse\n"
@@ -150,7 +150,7 @@
  "\n"
  "Handle the error in the if case.\n"
  "\n"
- ">      if (PTR_ERR(data->lm90_reg) == -EPROBE_DEFER)\n"
+ ">      if (PTR_ERR(data->lm90_reg) = -EPROBE_DEFER)\n"
  ">          return -EPRPBE_DEFER;\n"
  ">\n"
  ">          data->lm90_reg = !!IS_ERR(data->lm90_reg);\n"
@@ -177,7 +177,7 @@
  ">>> +\n"
  ">>>    \t/* Set the device type */\n"
  ">>>    \tdata->kind = id->driver_data;\n"
- ">>>    \tif (data->kind == adm1032) {\n"
+ ">>>    \tif (data->kind = adm1032) {\n"
  ">>> @@ -1473,6 +1515,10 @@ exit_remove_files:\n"
  ">>>    \tlm90_remove_files(client, data);\n"
  ">>>    exit_restore:\n"
@@ -203,6 +203,12 @@
  ">>\n"
  ">\n"
  ">\n"
- >
+ ">\n"
+ "\n"
+ "\n"
+ "_______________________________________________\n"
+ "lm-sensors mailing list\n"
+ "lm-sensors@lm-sensors.org\n"
+ http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
 
-eba3c759f23399b5136e4b16fd8d6a4fe87f87294c62ad4fa956480f0387d1ef
+f87b825853bc4fcf03dc638248fb733753c5807c3cb3fbc49b17e0779999aa9d
