diff for duplicates of <52048936.9040809@nvidia.com> diff --git a/a/1.txt b/N1/1.txt index fdab9d9..b269c1d 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -18,8 +18,7 @@ On 08/09/2013 05:33 AM, Guenter Roeck wrote: >>>> --- a/arch/arm/boot/dts/tegra114-dalmore.dts >>>> +++ b/arch/arm/boot/dts/tegra114-dalmore.dts >>>> @@ -738,6 +738,14 @@ ->>>> realtek,ldo1-en-gpios = ->>>> <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; +>>>> realtek,ldo1-en-gpios >>>> <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; >>>> }; >>>> + >>>> + nct1008 { @@ -44,4 +43,10 @@ And I will send out patches to change all other "nct1008" nodes. > > Guenter -> +> + + +_______________________________________________ +lm-sensors mailing list +lm-sensors@lm-sensors.org +http://lists.lm-sensors.org/mailman/listinfo/lm-sensors diff --git a/a/content_digest b/N1/content_digest index 8f9526a..5d299ff 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -4,8 +4,8 @@ "ref\052040236.2080701@wwwdotorg.org\0" "ref\052040EB9.2050908@roeck-us.net\0" "From\0Wei Ni <wni@nvidia.com>\0" - "Subject\0Re: [PATCH v2 2/3] ARM: dt: t114 dalmore: add dt entry for nct1008\0" - "Date\0Fri, 9 Aug 2013 14:16:22 +0800\0" + "Subject\0Re: [lm-sensors] [PATCH v2 2/3] ARM: dt: t114 dalmore: add dt entry for nct1008\0" + "Date\0Fri, 09 Aug 2013 06:16:22 +0000\0" "To\0Guenter Roeck <linux@roeck-us.net>\0" "Cc\0Stephen Warren <swarren@wwwdotorg.org>" Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> @@ -37,8 +37,7 @@ ">>>> --- a/arch/arm/boot/dts/tegra114-dalmore.dts\n" ">>>> +++ b/arch/arm/boot/dts/tegra114-dalmore.dts\n" ">>>> @@ -738,6 +738,14 @@\n" - ">>>> realtek,ldo1-en-gpios =\n" - ">>>> <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;\n" + ">>>> realtek,ldo1-en-gpios >>>> <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;\n" ">>>> };\n" ">>>> +\n" ">>>> + nct1008 {\n" @@ -63,6 +62,12 @@ "\n" "> \n" "> Guenter\n" - > + "> \n" + "\n" + "\n" + "_______________________________________________\n" + "lm-sensors mailing list\n" + "lm-sensors@lm-sensors.org\n" + http://lists.lm-sensors.org/mailman/listinfo/lm-sensors -d72f5c5187de2df0b8a916e705c13489651cea94f76ca9219c9db850f11338d3 +108cd8b433bb35ac45b74639813bdea1489fd8bba27a84e63489d3ed5bcbeecf
diff --git a/a/1.txt b/N2/1.txt index fdab9d9..aa427c2 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -36,7 +36,7 @@ On 08/09/2013 05:33 AM, Guenter Roeck wrote: > > On the other side, one should not use a bad example as an argument or excuse > to make the same mistake again (though I keep hearing it all the time ... ). -> I for my part tend to use something like temp-sensor or temp-sensor@1c. +> I for my part tend to use something like temp-sensor or temp-sensor at 1c. > Advantage of that kind of node name is that it auto-describes the node. Ok, so I will set the node name as "temp-sensor" diff --git a/a/content_digest b/N2/content_digest index 8f9526a..c96ca54 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -3,18 +3,10 @@ "ref\052040146.7060703@cogentembedded.com\0" "ref\052040236.2080701@wwwdotorg.org\0" "ref\052040EB9.2050908@roeck-us.net\0" - "From\0Wei Ni <wni@nvidia.com>\0" - "Subject\0Re: [PATCH v2 2/3] ARM: dt: t114 dalmore: add dt entry for nct1008\0" + "From\0wni@nvidia.com (Wei Ni)\0" + "Subject\0[PATCH v2 2/3] ARM: dt: t114 dalmore: add dt entry for nct1008\0" "Date\0Fri, 9 Aug 2013 14:16:22 +0800\0" - "To\0Guenter Roeck <linux@roeck-us.net>\0" - "Cc\0Stephen Warren <swarren@wwwdotorg.org>" - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - khali@linux-fr.org <khali@linux-fr.org> - linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> - lm-sensors@lm-sensors.org <lm-sensors@lm-sensors.org> - Matthew Longnecker <MLongnecker@nvidia.com> - linux-tegra@vger.kernel.org <linux-tegra@vger.kernel.org> - " linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 08/09/2013 05:33 AM, Guenter Roeck wrote:\n" @@ -55,7 +47,7 @@ "> \n" "> On the other side, one should not use a bad example as an argument or excuse\n" "> to make the same mistake again (though I keep hearing it all the time ... ).\n" - "> I for my part tend to use something like temp-sensor or temp-sensor@1c.\n" + "> I for my part tend to use something like temp-sensor or temp-sensor at 1c.\n" "> Advantage of that kind of node name is that it auto-describes the node.\n" "\n" "Ok, so I will set the node name as \"temp-sensor\"\n" @@ -65,4 +57,4 @@ "> Guenter\n" > -d72f5c5187de2df0b8a916e705c13489651cea94f76ca9219c9db850f11338d3 +d2e23afc77d200e73697cf06f4f7779f3b43b1eb1a63d3910b1e0669963e935f
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.