From: Mark Jackson <mpfj-list@newflow.co.uk>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] Add NanoBone board support
Date: Sun, 11 Aug 2013 09:31:00 +0100 [thread overview]
Message-ID: <52074BC4.7060606@newflow.co.uk> (raw)
In-Reply-To: <5175313F.2020909@newflow.co.uk>
On 22/04/13 13:46, Mark Jackson wrote:
> NanoBone Specification:
> -----------------------
> CPU:
> TI AM335x
>
> Memory:
> 256MB DDR3
> 64MB NOR flash
> 256MB NAND flash
> 128KB FRAM
>
> Ethernet:
> 2 x 10/100 connected to SMSC LAN8710 PHY
>
> USB:
> 1 x USB2.0 Type A
>
> I2C:
> 2Kbit EEPROM (Microchip 24AA02)
> RTC (Maxim DS1338)
> GPIO Expander (Microchip MCP23017)
>
> Expansion connector:
> 6 x UART
> 1 x MMC/SD
> 1 x USB2.0
>
> Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
> ---
> Changes in v2:
> - Tweaked after comments from Tom Rini
>
> MAINTAINERS | 4 +
> board/newflow/nanobone/Makefile | 46 ++++++
> board/newflow/nanobone/board.c | 304
> +++++++++++++++++++++++++++++++++++++++
> board/newflow/nanobone/board.h | 24 ++++
> board/newflow/nanobone/mux.c | 203 ++++++++++++++++++++++++++
> boards.cfg | 1 +
> include/configs/nanobone.h | 285 ++++++++++++++++++++++++++++++++++++
> 7 files changed, 867 insertions(+)
> create mode 100644 board/newflow/nanobone/Makefile
> create mode 100644 board/newflow/nanobone/board.c
> create mode 100644 board/newflow/nanobone/board.h
> create mode 100644 board/newflow/nanobone/mux.c
> create mode 100644 include/configs/nanobone.h
Any chance this board can be added ?
Regards
Mark J.
next prev parent reply other threads:[~2013-08-11 8:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-22 12:46 [U-Boot] [PATCH v2] Add NanoBone board support Mark Jackson
2013-04-25 20:30 ` Tom Rini
2013-08-11 8:31 ` Mark Jackson [this message]
2013-08-11 18:34 ` Tom Rini
2013-08-12 8:30 ` Mark Jackson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52074BC4.7060606@newflow.co.uk \
--to=mpfj-list@newflow.co.uk \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.