All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Maier <m1278468@allmail.net>
To: Eric Sandeen <sandeen@sandeen.net>
Cc: xfs@oss.sgi.com
Subject: Re: Failure growing xfs with linux 3.10.5
Date: Mon, 12 Aug 2013 18:50:55 +0200	[thread overview]
Message-ID: <5209126F.5020204@allmail.net> (raw)
In-Reply-To: <5207D9C4.7020102@sandeen.net>

Eric Sandeen wrote:
> On 8/11/13 2:11 AM, Michael Maier wrote:
>> Hello!
>>
>> I think I'm facing the same problem as already described here:
>> http://thread.gmane.org/gmane.comp.file-systems.xfs.general/54428
> 
> Maybe you can try the tracing Dave suggested in that thread?

I sent you a trace.




Meanwhile, I faced another problem on another xfs-file system with linux
3.10.5 which I never saw before. During writing a few bytes to disc, I
got "disc full" and the writing failed.

At the same time, df reported 69G of free space! I ran xfs_repair -n and
got:


xfs_repair -n /dev/mapper/raid0-daten2
Phase 1 - find and verify superblock...
Phase 2 - using internal log
        - scan filesystem freespace and inode maps...
sb_ifree 591, counted 492
^^^^^^^^^^^^^^^^^^^^^^^^^
What does this mean? How can I get rid of it w/o loosing data? This file
system was created a few days ago and never resized.


        - found root inode chunk
Phase 3 - for each AG...
        - scan (but don't clear) agi unlinked lists...
        - process known inodes and perform inode discovery...
        - agno = 0
        - agno = 1
        - agno = 2
        - agno = 3
        - agno = 4
        - agno = 5
        - agno = 6
        - agno = 7
        - agno = 8
        - agno = 9
        - agno = 10
        - agno = 11
        - agno = 12
        - agno = 13
        - agno = 14
        - agno = 15
        - process newly discovered inodes...
Phase 4 - check for duplicate blocks...
        - setting up duplicate extent list...
        - check for inodes claiming duplicate blocks...
        - agno = 0
        - agno = 5
        - agno = 1
        - agno = 4
        - agno = 2
        - agno = 7
        - agno = 3
        - agno = 6
        - agno = 8
        - agno = 9
        - agno = 10
        - agno = 11
        - agno = 12
        - agno = 13
        - agno = 14
        - agno = 15
No modify flag set, skipping phase 5
Phase 6 - check inode connectivity...



        - traversing filesystem ...
        - traversal finished ...
        - moving disconnected inodes to lost+found ...
Phase 7 - verify link counts...
No modify flag set, skipping filesystem flush and exiting.


Thanks,
regards,
Michael

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  reply	other threads:[~2013-08-12 16:51 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-11  7:11 Failure growing xfs with linux 3.10.5 Michael Maier
2013-08-11 18:36 ` Eric Sandeen
2013-08-12 16:50   ` Michael Maier [this message]
2013-08-13  0:54     ` Dave Chinner
2013-08-13 14:55       ` Michael Maier
2013-08-14  5:43         ` Dave Chinner
2013-08-14 15:16           ` Michael Maier
2013-08-15  0:58             ` Dave Chinner
2013-08-15 18:14               ` Michael Maier
     [not found]   ` <52090C6C.6060604@allmail.net>
2013-08-13  0:04     ` Dave Chinner
2013-08-13 15:30       ` Michael Maier
2013-08-14  5:53         ` Stan Hoeppner
2013-08-14 15:05           ` Michael Maier
2013-08-14 17:31             ` Stan Hoeppner
2013-08-14 18:13               ` Michael Maier
2013-08-14 22:20                 ` Stan Hoeppner
2013-08-15 17:05                   ` Michael Maier
2013-08-14  6:20         ` Dave Chinner
2013-08-14 16:20           ` Michael Maier
2013-08-14 16:37             ` Eric Sandeen
2013-08-15 17:18             ` Eric Sandeen
2013-08-15 17:55               ` Michael Maier
2013-08-15 18:14                 ` Eric Sandeen
2013-08-15 18:35                   ` Michael Maier
2013-08-15 18:42                     ` Eric Sandeen
2013-08-14 16:51           ` Eric Sandeen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5209126F.5020204@allmail.net \
    --to=m1278468@allmail.net \
    --cc=sandeen@sandeen.net \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.