From: Daniel Wagner <wagi@monom.org>
To: Arend van Spriel <arend@broadcom.com>
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: brcsmac kernel panic
Date: Mon, 12 Aug 2013 22:11:02 +0200 [thread overview]
Message-ID: <52094156.7010905@monom.org> (raw)
In-Reply-To: <5208BB2D.2000705@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 972 bytes --]
Hi Arend,
On 08/12/2013 12:38 PM, Arend van Spriel wrote:
> On 08/11/2013 06:21 PM, Daniel Wagner wrote:
>> I just updated my laptop (MacBook Air 2012) from 3.11-rc3+ to 3.11-rc4+
>> and since then brcsmac crashes short after enabling it. Unfortunately, I
>> did also change some config flags in the area of cpufreq (enabling
>> p-state driver) so the configuration is not exactly the same. Before I
>> try to figure out what I have changed, I am posting the picture of the
>> crash. Maybe it is something obvious.
>>
>> v3.11-rc4-197-gd92581f
>> http://www.monom.org/misc/brcmsmac/v3.11-rc4.config
>> http://www.monom.org/misc/brcmsmac/IMAG0064.jpg
>
> Thanks, Daniel
>
> I was looking at this issue two weeks ago and just got back from my
> vacation. Can you apply the patch and send me a kernel log?
Sure, the patch does the trick, the panic is gone.
> Sharing pictures, huh. What about this one :-p
No no, that isn't me, that is someone else! :P
cheers,
daniel
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 131779 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-rc4+ (wagi@helium) (gcc version 4.8.1 20130603 (Red Hat 4.8.1-1) (GCC) ) #38 SMP Sun Aug 11 17:46:03 CEST 2013
[ 0.000000] Command line: initrd=\initramfs-3.11.0-rc4+.img root=UUID=5ba0be6c-1f3f-45c4-8047-7dfed933d5ba ro
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000008ad11fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ad12000-0x000000008ad52fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008ad53000-0x000000008ad68fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ad69000-0x000000008ad8efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008ad8f000-0x000000008ae3afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ae3b000-0x000000008ae8efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ae8f000-0x000000008aecdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008aece000-0x000000008aefefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008aeff000-0x000000008af91fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008af92000-0x000000008affefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable
[ 0.000000] e820: update [mem 0x87d74190-0x87d841cf] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008e000-0x000000000008ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x0000000087d7418f] usable
[ 0.000000] reserve setup_data: [mem 0x0000000087d74190-0x0000000087d841cf] usable
[ 0.000000] reserve setup_data: [mem 0x0000000087d841d0-0x000000008ad11fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008ad12000-0x000000008ad52fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008ad53000-0x000000008ad68fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008ad69000-0x000000008ad8efff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000008ad8f000-0x000000008ae3afff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008ae3b000-0x000000008ae8efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008ae8f000-0x000000008aecdfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008aece000-0x000000008aefefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008aeff000-0x000000008af91fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008af92000-0x000000008affefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008afff000-0x000000008affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008b000000-0x000000008f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000026f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0x8ad8e000 ACPI 2.0=0x8ad8e014 SMBIOS=0x8ad19000
[ 0.000000] efi: mem00: type=7, attr=0x80000000000000f, range=[0x0000000000000000-0x000000000008e000) (0MB)
[ 0.000000] efi: mem01: type=0, attr=0x80000000000000f, range=[0x000000000008e000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem02: type=2, attr=0x80000000000000f, range=[0x0000000000090000-0x000000000009a000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0x80000000000000f, range=[0x000000000009a000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x000000000226f000) (18MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x000000000226f000-0x0000000020000000) (477MB)
[ 0.000000] efi: mem07: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
[ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000040005000-0x000000007de6c000) (990MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007de6c000-0x000000007eefb000) (16MB)
[ 0.000000] efi: mem12: type=1, attr=0xf, range=[0x000000007eefb000-0x000000007f3c4000) (4MB)
[ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x000000007f3c4000-0x000000007f88d000) (4MB)
[ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x000000007f88d000-0x0000000087d24000) (132MB)
[ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x0000000087d24000-0x0000000087d74000) (0MB)
[ 0.000000] efi: mem16: type=2, attr=0xf, range=[0x0000000087d74000-0x0000000087d86000) (0MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x0000000087d86000-0x0000000087d8b000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x0000000087d8b000-0x0000000087d8c000) (0MB)
[ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x0000000087d8c000-0x0000000087da2000) (0MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x0000000087da2000-0x0000000087dae000) (0MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x0000000087dae000-0x0000000087db6000) (0MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x0000000087db6000-0x00000000880ef000) (3MB)
[ 0.000000] efi: mem23: type=3, attr=0xf, range=[0x00000000880ef000-0x0000000088206000) (1MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x0000000088206000-0x00000000882ef000) (0MB)
[ 0.000000] efi: mem25: type=3, attr=0xf, range=[0x00000000882ef000-0x0000000088312000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x0000000088312000-0x0000000088346000) (0MB)
[ 0.000000] efi: mem27: type=3, attr=0xf, range=[0x0000000088346000-0x000000008837b000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000008837b000-0x000000008841b000) (0MB)
[ 0.000000] efi: mem29: type=3, attr=0xf, range=[0x000000008841b000-0x0000000088420000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x0000000088420000-0x0000000088423000) (0MB)
[ 0.000000] efi: mem31: type=2, attr=0xf, range=[0x0000000088423000-0x0000000088424000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x0000000088424000-0x0000000088426000) (0MB)
[ 0.000000] efi: mem33: type=3, attr=0xf, range=[0x0000000088426000-0x0000000088427000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x0000000088427000-0x0000000088428000) (0MB)
[ 0.000000] efi: mem35: type=3, attr=0xf, range=[0x0000000088428000-0x000000008842b000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x000000008842b000-0x000000008842c000) (0MB)
[ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x000000008842c000-0x0000000088432000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x0000000088432000-0x0000000088438000) (0MB)
[ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x0000000088438000-0x000000008843c000) (0MB)
[ 0.000000] efi: mem40: type=2, attr=0xf, range=[0x000000008843c000-0x000000008843d000) (0MB)
[ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x000000008843d000-0x000000008843e000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x000000008843e000-0x0000000088442000) (0MB)
[ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x0000000088442000-0x0000000088444000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x0000000088444000-0x0000000088446000) (0MB)
[ 0.000000] efi: mem45: type=2, attr=0xf, range=[0x0000000088446000-0x0000000088447000) (0MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x0000000088447000-0x0000000088466000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000088466000-0x0000000088467000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000088467000-0x000000008846c000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x000000008846c000-0x000000008846f000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x000000008846f000-0x0000000088473000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x0000000088473000-0x000000008847b000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x000000008847b000-0x000000008848f000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x000000008848f000-0x0000000088490000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x0000000088490000-0x000000008849b000) (0MB)
[ 0.000000] efi: mem55: type=2, attr=0xf, range=[0x000000008849b000-0x000000008849c000) (0MB)
[ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x000000008849c000-0x00000000884a2000) (0MB)
[ 0.000000] efi: mem57: type=3, attr=0xf, range=[0x00000000884a2000-0x00000000884ad000) (0MB)
[ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x00000000884ad000-0x00000000884ae000) (0MB)
[ 0.000000] efi: mem59: type=3, attr=0xf, range=[0x00000000884ae000-0x00000000884b3000) (0MB)
[ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x00000000884b3000-0x00000000884f9000) (0MB)
[ 0.000000] efi: mem61: type=3, attr=0xf, range=[0x00000000884f9000-0x00000000884fa000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x00000000884fa000-0x00000000884fb000) (0MB)
[ 0.000000] efi: mem63: type=2, attr=0xf, range=[0x00000000884fb000-0x00000000884fc000) (0MB)
[ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x00000000884fc000-0x0000000089542000) (16MB)
[ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x0000000089542000-0x0000000089547000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x0000000089547000-0x000000008967d000) (1MB)
[ 0.000000] efi: mem67: type=2, attr=0xf, range=[0x000000008967d000-0x000000008967e000) (0MB)
[ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x000000008967e000-0x0000000089696000) (0MB)
[ 0.000000] efi: mem69: type=3, attr=0xf, range=[0x0000000089696000-0x000000008969f000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x000000008969f000-0x00000000896bb000) (0MB)
[ 0.000000] efi: mem71: type=3, attr=0xf, range=[0x00000000896bb000-0x00000000896bd000) (0MB)
[ 0.000000] efi: mem72: type=2, attr=0xf, range=[0x00000000896bd000-0x00000000896be000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x00000000896be000-0x00000000896c2000) (0MB)
[ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x00000000896c2000-0x00000000896c9000) (0MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000896c9000-0x00000000896cc000) (0MB)
[ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x00000000896cc000-0x00000000896cd000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000896cd000-0x00000000896ce000) (0MB)
[ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x00000000896ce000-0x00000000896cf000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x00000000896cf000-0x00000000896d3000) (0MB)
[ 0.000000] efi: mem80: type=3, attr=0xf, range=[0x00000000896d3000-0x00000000896d8000) (0MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x00000000896d8000-0x00000000896e0000) (0MB)
[ 0.000000] efi: mem82: type=2, attr=0xf, range=[0x00000000896e0000-0x00000000896e1000) (0MB)
[ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x00000000896e1000-0x00000000896ed000) (0MB)
[ 0.000000] efi: mem84: type=3, attr=0xf, range=[0x00000000896ed000-0x00000000896f1000) (0MB)
[ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x00000000896f1000-0x00000000896f7000) (0MB)
[ 0.000000] efi: mem86: type=3, attr=0xf, range=[0x00000000896f7000-0x0000000089703000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x0000000089703000-0x0000000089706000) (0MB)
[ 0.000000] efi: mem88: type=3, attr=0xf, range=[0x0000000089706000-0x0000000089707000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x0000000089707000-0x0000000089708000) (0MB)
[ 0.000000] efi: mem90: type=2, attr=0xf, range=[0x0000000089708000-0x0000000089709000) (0MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x0000000089709000-0x000000008970c000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x000000008970c000-0x000000008970e000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x000000008970e000-0x000000008973c000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x000000008973c000-0x000000008973f000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x000000008973f000-0x0000000089743000) (0MB)
[ 0.000000] efi: mem96: type=2, attr=0xf, range=[0x0000000089743000-0x0000000089744000) (0MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x0000000089744000-0x0000000089773000) (0MB)
[ 0.000000] efi: mem98: type=3, attr=0xf, range=[0x0000000089773000-0x0000000089782000) (0MB)
[ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x0000000089782000-0x0000000089791000) (0MB)
[ 0.000000] efi: mem100: type=3, attr=0xf, range=[0x0000000089791000-0x000000008979b000) (0MB)
[ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x000000008979b000-0x000000008979c000) (0MB)
[ 0.000000] efi: mem102: type=3, attr=0xf, range=[0x000000008979c000-0x00000000897a6000) (0MB)
[ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x00000000897a6000-0x00000000897aa000) (0MB)
[ 0.000000] efi: mem104: type=3, attr=0xf, range=[0x00000000897aa000-0x00000000897bb000) (0MB)
[ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x00000000897bb000-0x00000000897bc000) (0MB)
[ 0.000000] efi: mem106: type=2, attr=0xf, range=[0x00000000897bc000-0x00000000897bd000) (0MB)
[ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x00000000897bd000-0x00000000897c0000) (0MB)
[ 0.000000] efi: mem108: type=3, attr=0xf, range=[0x00000000897c0000-0x00000000897c4000) (0MB)
[ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x00000000897c4000-0x00000000897c5000) (0MB)
[ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x00000000897c5000-0x00000000897c6000) (0MB)
[ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x00000000897c6000-0x00000000897ca000) (0MB)
[ 0.000000] efi: mem112: type=3, attr=0xf, range=[0x00000000897ca000-0x00000000897cb000) (0MB)
[ 0.000000] efi: mem113: type=2, attr=0xf, range=[0x00000000897cb000-0x00000000897cc000) (0MB)
[ 0.000000] efi: mem114: type=4, attr=0xf, range=[0x00000000897cc000-0x00000000897cd000) (0MB)
[ 0.000000] efi: mem115: type=3, attr=0xf, range=[0x00000000897cd000-0x00000000897cf000) (0MB)
[ 0.000000] efi: mem116: type=4, attr=0xf, range=[0x00000000897cf000-0x00000000897d0000) (0MB)
[ 0.000000] efi: mem117: type=3, attr=0xf, range=[0x00000000897d0000-0x00000000897d5000) (0MB)
[ 0.000000] efi: mem118: type=4, attr=0xf, range=[0x00000000897d5000-0x00000000897d8000) (0MB)
[ 0.000000] efi: mem119: type=2, attr=0xf, range=[0x00000000897d8000-0x00000000897d9000) (0MB)
[ 0.000000] efi: mem120: type=4, attr=0xf, range=[0x00000000897d9000-0x00000000897da000) (0MB)
[ 0.000000] efi: mem121: type=3, attr=0xf, range=[0x00000000897da000-0x00000000897db000) (0MB)
[ 0.000000] efi: mem122: type=4, attr=0xf, range=[0x00000000897db000-0x00000000897dc000) (0MB)
[ 0.000000] efi: mem123: type=3, attr=0xf, range=[0x00000000897dc000-0x00000000897df000) (0MB)
[ 0.000000] efi: mem124: type=4, attr=0xf, range=[0x00000000897df000-0x00000000897e3000) (0MB)
[ 0.000000] efi: mem125: type=3, attr=0xf, range=[0x00000000897e3000-0x00000000897e4000) (0MB)
[ 0.000000] efi: mem126: type=4, attr=0xf, range=[0x00000000897e4000-0x00000000897e5000) (0MB)
[ 0.000000] efi: mem127: type=2, attr=0xf, range=[0x00000000897e5000-0x00000000897e6000) (0MB)
[ 0.000000] efi: mem128: type=4, attr=0xf, range=[0x00000000897e6000-0x00000000897e7000) (0MB)
[ 0.000000] efi: mem129: type=3, attr=0xf, range=[0x00000000897e7000-0x00000000897e8000) (0MB)
[ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x00000000897e8000-0x00000000897e9000) (0MB)
[ 0.000000] efi: mem131: type=3, attr=0xf, range=[0x00000000897e9000-0x00000000897f7000) (0MB)
[ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x00000000897f7000-0x00000000897f8000) (0MB)
[ 0.000000] efi: mem133: type=3, attr=0xf, range=[0x00000000897f8000-0x00000000897f9000) (0MB)
[ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x00000000897f9000-0x00000000897fa000) (0MB)
[ 0.000000] efi: mem135: type=3, attr=0xf, range=[0x00000000897fa000-0x0000000089801000) (0MB)
[ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x0000000089801000-0x0000000089805000) (0MB)
[ 0.000000] efi: mem137: type=3, attr=0xf, range=[0x0000000089805000-0x000000008980b000) (0MB)
[ 0.000000] efi: mem138: type=4, attr=0xf, range=[0x000000008980b000-0x000000008980e000) (0MB)
[ 0.000000] efi: mem139: type=2, attr=0xf, range=[0x000000008980e000-0x000000008980f000) (0MB)
[ 0.000000] efi: mem140: type=4, attr=0xf, range=[0x000000008980f000-0x0000000089817000) (0MB)
[ 0.000000] efi: mem141: type=3, attr=0xf, range=[0x0000000089817000-0x000000008981c000) (0MB)
[ 0.000000] efi: mem142: type=4, attr=0xf, range=[0x000000008981c000-0x0000000089825000) (0MB)
[ 0.000000] efi: mem143: type=3, attr=0xf, range=[0x0000000089825000-0x000000008983e000) (0MB)
[ 0.000000] efi: mem144: type=4, attr=0xf, range=[0x000000008983e000-0x0000000089840000) (0MB)
[ 0.000000] efi: mem145: type=3, attr=0xf, range=[0x0000000089840000-0x000000008984e000) (0MB)
[ 0.000000] efi: mem146: type=4, attr=0xf, range=[0x000000008984e000-0x000000008984f000) (0MB)
[ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x000000008984f000-0x0000000089852000) (0MB)
[ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x0000000089852000-0x0000000089855000) (0MB)
[ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x0000000089855000-0x0000000089864000) (0MB)
[ 0.000000] efi: mem150: type=4, attr=0xf, range=[0x0000000089864000-0x0000000089866000) (0MB)
[ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x0000000089866000-0x000000008986a000) (0MB)
[ 0.000000] efi: mem152: type=4, attr=0xf, range=[0x000000008986a000-0x000000008986c000) (0MB)
[ 0.000000] efi: mem153: type=2, attr=0xf, range=[0x000000008986c000-0x000000008986d000) (0MB)
[ 0.000000] efi: mem154: type=4, attr=0xf, range=[0x000000008986d000-0x000000008986e000) (0MB)
[ 0.000000] efi: mem155: type=3, attr=0xf, range=[0x000000008986e000-0x0000000089872000) (0MB)
[ 0.000000] efi: mem156: type=4, attr=0xf, range=[0x0000000089872000-0x0000000089873000) (0MB)
[ 0.000000] efi: mem157: type=2, attr=0xf, range=[0x0000000089873000-0x0000000089874000) (0MB)
[ 0.000000] efi: mem158: type=4, attr=0xf, range=[0x0000000089874000-0x000000008987b000) (0MB)
[ 0.000000] efi: mem159: type=3, attr=0xf, range=[0x000000008987b000-0x000000008988a000) (0MB)
[ 0.000000] efi: mem160: type=4, attr=0xf, range=[0x000000008988a000-0x0000000089891000) (0MB)
[ 0.000000] efi: mem161: type=3, attr=0xf, range=[0x0000000089891000-0x00000000898bc000) (0MB)
[ 0.000000] efi: mem162: type=4, attr=0xf, range=[0x00000000898bc000-0x00000000898c1000) (0MB)
[ 0.000000] efi: mem163: type=3, attr=0xf, range=[0x00000000898c1000-0x00000000898c5000) (0MB)
[ 0.000000] efi: mem164: type=4, attr=0xf, range=[0x00000000898c5000-0x00000000898c7000) (0MB)
[ 0.000000] efi: mem165: type=2, attr=0xf, range=[0x00000000898c7000-0x00000000898c8000) (0MB)
[ 0.000000] efi: mem166: type=4, attr=0xf, range=[0x00000000898c8000-0x00000000898c9000) (0MB)
[ 0.000000] efi: mem167: type=3, attr=0xf, range=[0x00000000898c9000-0x00000000898d3000) (0MB)
[ 0.000000] efi: mem168: type=4, attr=0xf, range=[0x00000000898d3000-0x00000000898d4000) (0MB)
[ 0.000000] efi: mem169: type=3, attr=0xf, range=[0x00000000898d4000-0x00000000898d7000) (0MB)
[ 0.000000] efi: mem170: type=4, attr=0xf, range=[0x00000000898d7000-0x00000000898db000) (0MB)
[ 0.000000] efi: mem171: type=2, attr=0xf, range=[0x00000000898db000-0x00000000898dc000) (0MB)
[ 0.000000] efi: mem172: type=4, attr=0xf, range=[0x00000000898dc000-0x00000000898de000) (0MB)
[ 0.000000] efi: mem173: type=3, attr=0xf, range=[0x00000000898de000-0x00000000898e5000) (0MB)
[ 0.000000] efi: mem174: type=4, attr=0xf, range=[0x00000000898e5000-0x00000000898e9000) (0MB)
[ 0.000000] efi: mem175: type=3, attr=0xf, range=[0x00000000898e9000-0x00000000898ea000) (0MB)
[ 0.000000] efi: mem176: type=4, attr=0xf, range=[0x00000000898ea000-0x00000000898eb000) (0MB)
[ 0.000000] efi: mem177: type=2, attr=0xf, range=[0x00000000898eb000-0x00000000898ec000) (0MB)
[ 0.000000] efi: mem178: type=4, attr=0xf, range=[0x00000000898ec000-0x00000000898ee000) (0MB)
[ 0.000000] efi: mem179: type=3, attr=0xf, range=[0x00000000898ee000-0x00000000898f0000) (0MB)
[ 0.000000] efi: mem180: type=4, attr=0xf, range=[0x00000000898f0000-0x00000000898f2000) (0MB)
[ 0.000000] efi: mem181: type=2, attr=0xf, range=[0x00000000898f2000-0x00000000898f3000) (0MB)
[ 0.000000] efi: mem182: type=4, attr=0xf, range=[0x00000000898f3000-0x00000000898f4000) (0MB)
[ 0.000000] efi: mem183: type=3, attr=0xf, range=[0x00000000898f4000-0x00000000898f5000) (0MB)
[ 0.000000] efi: mem184: type=4, attr=0xf, range=[0x00000000898f5000-0x00000000898f9000) (0MB)
[ 0.000000] efi: mem185: type=3, attr=0xf, range=[0x00000000898f9000-0x00000000898fa000) (0MB)
[ 0.000000] efi: mem186: type=4, attr=0xf, range=[0x00000000898fa000-0x00000000898fc000) (0MB)
[ 0.000000] efi: mem187: type=3, attr=0xf, range=[0x00000000898fc000-0x000000008990b000) (0MB)
[ 0.000000] efi: mem188: type=4, attr=0xf, range=[0x000000008990b000-0x000000008990f000) (0MB)
[ 0.000000] efi: mem189: type=3, attr=0xf, range=[0x000000008990f000-0x0000000089910000) (0MB)
[ 0.000000] efi: mem190: type=4, attr=0xf, range=[0x0000000089910000-0x0000000089911000) (0MB)
[ 0.000000] efi: mem191: type=2, attr=0xf, range=[0x0000000089911000-0x0000000089912000) (0MB)
[ 0.000000] efi: mem192: type=4, attr=0xf, range=[0x0000000089912000-0x0000000089914000) (0MB)
[ 0.000000] efi: mem193: type=3, attr=0xf, range=[0x0000000089914000-0x0000000089915000) (0MB)
[ 0.000000] efi: mem194: type=4, attr=0xf, range=[0x0000000089915000-0x000000008991c000) (0MB)
[ 0.000000] efi: mem195: type=3, attr=0xf, range=[0x000000008991c000-0x000000008991e000) (0MB)
[ 0.000000] efi: mem196: type=4, attr=0xf, range=[0x000000008991e000-0x0000000089923000) (0MB)
[ 0.000000] efi: mem197: type=2, attr=0xf, range=[0x0000000089923000-0x0000000089924000) (0MB)
[ 0.000000] efi: mem198: type=3, attr=0xf, range=[0x0000000089924000-0x0000000089925000) (0MB)
[ 0.000000] efi: mem199: type=4, attr=0xf, range=[0x0000000089925000-0x0000000089928000) (0MB)
[ 0.000000] efi: mem200: type=3, attr=0xf, range=[0x0000000089928000-0x0000000089929000) (0MB)
[ 0.000000] efi: mem201: type=4, attr=0xf, range=[0x0000000089929000-0x000000008992d000) (0MB)
[ 0.000000] efi: mem202: type=3, attr=0xf, range=[0x000000008992d000-0x0000000089932000) (0MB)
[ 0.000000] efi: mem203: type=4, attr=0xf, range=[0x0000000089932000-0x0000000089961000) (0MB)
[ 0.000000] efi: mem204: type=3, attr=0xf, range=[0x0000000089961000-0x0000000089974000) (0MB)
[ 0.000000] efi: mem205: type=4, attr=0xf, range=[0x0000000089974000-0x000000008998f000) (0MB)
[ 0.000000] efi: mem206: type=3, attr=0xf, range=[0x000000008998f000-0x0000000089992000) (0MB)
[ 0.000000] efi: mem207: type=4, attr=0xf, range=[0x0000000089992000-0x0000000089993000) (0MB)
[ 0.000000] efi: mem208: type=2, attr=0xf, range=[0x0000000089993000-0x0000000089994000) (0MB)
[ 0.000000] efi: mem209: type=4, attr=0xf, range=[0x0000000089994000-0x00000000899be000) (0MB)
[ 0.000000] efi: mem210: type=3, attr=0xf, range=[0x00000000899be000-0x00000000899d2000) (0MB)
[ 0.000000] efi: mem211: type=4, attr=0xf, range=[0x00000000899d2000-0x00000000899ea000) (0MB)
[ 0.000000] efi: mem212: type=2, attr=0xf, range=[0x00000000899ea000-0x00000000899eb000) (0MB)
[ 0.000000] efi: mem213: type=4, attr=0xf, range=[0x00000000899eb000-0x00000000899ef000) (0MB)
[ 0.000000] efi: mem214: type=3, attr=0xf, range=[0x00000000899ef000-0x00000000899f4000) (0MB)
[ 0.000000] efi: mem215: type=4, attr=0xf, range=[0x00000000899f4000-0x00000000899fc000) (0MB)
[ 0.000000] efi: mem216: type=2, attr=0xf, range=[0x00000000899fc000-0x00000000899fd000) (0MB)
[ 0.000000] efi: mem217: type=4, attr=0xf, range=[0x00000000899fd000-0x00000000899fe000) (0MB)
[ 0.000000] efi: mem218: type=3, attr=0xf, range=[0x00000000899fe000-0x00000000899ff000) (0MB)
[ 0.000000] efi: mem219: type=4, attr=0xf, range=[0x00000000899ff000-0x0000000089a00000) (0MB)
[ 0.000000] efi: mem220: type=3, attr=0xf, range=[0x0000000089a00000-0x0000000089a01000) (0MB)
[ 0.000000] efi: mem221: type=4, attr=0xf, range=[0x0000000089a01000-0x0000000089a02000) (0MB)
[ 0.000000] efi: mem222: type=3, attr=0xf, range=[0x0000000089a02000-0x0000000089a03000) (0MB)
[ 0.000000] efi: mem223: type=4, attr=0xf, range=[0x0000000089a03000-0x0000000089a14000) (0MB)
[ 0.000000] efi: mem224: type=3, attr=0xf, range=[0x0000000089a14000-0x0000000089a19000) (0MB)
[ 0.000000] efi: mem225: type=4, attr=0xf, range=[0x0000000089a19000-0x0000000089a1a000) (0MB)
[ 0.000000] efi: mem226: type=3, attr=0xf, range=[0x0000000089a1a000-0x0000000089a1c000) (0MB)
[ 0.000000] efi: mem227: type=4, attr=0xf, range=[0x0000000089a1c000-0x0000000089a1e000) (0MB)
[ 0.000000] efi: mem228: type=3, attr=0xf, range=[0x0000000089a1e000-0x0000000089a2f000) (0MB)
[ 0.000000] efi: mem229: type=4, attr=0xf, range=[0x0000000089a2f000-0x0000000089a32000) (0MB)
[ 0.000000] efi: mem230: type=3, attr=0xf, range=[0x0000000089a32000-0x0000000089a3e000) (0MB)
[ 0.000000] efi: mem231: type=2, attr=0xf, range=[0x0000000089a3e000-0x0000000089a3f000) (0MB)
[ 0.000000] efi: mem232: type=3, attr=0xf, range=[0x0000000089a3f000-0x0000000089a40000) (0MB)
[ 0.000000] efi: mem233: type=4, attr=0xf, range=[0x0000000089a40000-0x0000000089a42000) (0MB)
[ 0.000000] efi: mem234: type=3, attr=0xf, range=[0x0000000089a42000-0x0000000089a44000) (0MB)
[ 0.000000] efi: mem235: type=4, attr=0xf, range=[0x0000000089a44000-0x0000000089a45000) (0MB)
[ 0.000000] efi: mem236: type=3, attr=0xf, range=[0x0000000089a45000-0x0000000089a46000) (0MB)
[ 0.000000] efi: mem237: type=2, attr=0xf, range=[0x0000000089a46000-0x0000000089a47000) (0MB)
[ 0.000000] efi: mem238: type=3, attr=0xf, range=[0x0000000089a47000-0x0000000089a49000) (0MB)
[ 0.000000] efi: mem239: type=4, attr=0xf, range=[0x0000000089a49000-0x0000000089e6a000) (4MB)
[ 0.000000] efi: mem240: type=3, attr=0xf, range=[0x0000000089e6a000-0x0000000089e6f000) (0MB)
[ 0.000000] efi: mem241: type=2, attr=0xf, range=[0x0000000089e6f000-0x0000000089e70000) (0MB)
[ 0.000000] efi: mem242: type=3, attr=0xf, range=[0x0000000089e70000-0x0000000089e78000) (0MB)
[ 0.000000] efi: mem243: type=4, attr=0xf, range=[0x0000000089e78000-0x0000000089e7a000) (0MB)
[ 0.000000] efi: mem244: type=2, attr=0xf, range=[0x0000000089e7a000-0x0000000089e7b000) (0MB)
[ 0.000000] efi: mem245: type=4, attr=0xf, range=[0x0000000089e7b000-0x0000000089e7c000) (0MB)
[ 0.000000] efi: mem246: type=3, attr=0xf, range=[0x0000000089e7c000-0x0000000089e81000) (0MB)
[ 0.000000] efi: mem247: type=4, attr=0xf, range=[0x0000000089e81000-0x0000000089e82000) (0MB)
[ 0.000000] efi: mem248: type=3, attr=0xf, range=[0x0000000089e82000-0x0000000089e85000) (0MB)
[ 0.000000] efi: mem249: type=4, attr=0xf, range=[0x0000000089e85000-0x0000000089eaa000) (0MB)
[ 0.000000] efi: mem250: type=3, attr=0xf, range=[0x0000000089eaa000-0x0000000089eab000) (0MB)
[ 0.000000] efi: mem251: type=4, attr=0xf, range=[0x0000000089eab000-0x0000000089eae000) (0MB)
[ 0.000000] efi: mem252: type=3, attr=0xf, range=[0x0000000089eae000-0x0000000089eaf000) (0MB)
[ 0.000000] efi: mem253: type=4, attr=0xf, range=[0x0000000089eaf000-0x000000008a0db000) (2MB)
[ 0.000000] efi: mem254: type=2, attr=0xf, range=[0x000000008a0db000-0x000000008a0dc000) (0MB)
[ 0.000000] efi: mem255: type=4, attr=0xf, range=[0x000000008a0dc000-0x000000008acfa000) (12MB)
[ 0.000000] efi: mem256: type=2, attr=0xf, range=[0x000000008acfa000-0x000000008acfb000) (0MB)
[ 0.000000] efi: mem257: type=4, attr=0xf, range=[0x000000008acfb000-0x000000008ad03000) (0MB)
[ 0.000000] efi: mem258: type=7, attr=0xf, range=[0x000000008ad03000-0x000000008ad12000) (0MB)
[ 0.000000] efi: mem259: type=10, attr=0xf, range=[0x000000008ad12000-0x000000008ad53000) (0MB)
[ 0.000000] efi: mem260: type=7, attr=0xf, range=[0x000000008ad53000-0x000000008ad69000) (0MB)
[ 0.000000] efi: mem261: type=9, attr=0xf, range=[0x000000008ad69000-0x000000008ad8f000) (0MB)
[ 0.000000] efi: mem262: type=7, attr=0xf, range=[0x000000008ad8f000-0x000000008ae3b000) (0MB)
[ 0.000000] efi: mem263: type=6, attr=0x800000000000000f, range=[0x000000008ae3b000-0x000000008ae8f000) (0MB)
[ 0.000000] efi: mem264: type=7, attr=0xf, range=[0x000000008ae8f000-0x000000008aece000) (0MB)
[ 0.000000] efi: mem265: type=5, attr=0x800000000000000f, range=[0x000000008aece000-0x000000008aeff000) (0MB)
[ 0.000000] efi: mem266: type=7, attr=0xf, range=[0x000000008aeff000-0x000000008af92000) (0MB)
[ 0.000000] efi: mem267: type=0, attr=0xf, range=[0x000000008af92000-0x000000008afff000) (0MB)
[ 0.000000] efi: mem268: type=2, attr=0xf, range=[0x000000008afff000-0x000000008b000000) (0MB)
[ 0.000000] efi: mem269: type=7, attr=0xf, range=[0x0000000100000000-0x000000026f600000) (5878MB)
[ 0.000000] efi: mem270: type=0, attr=0x8000000000000000, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem271: type=0, attr=0x8000000000000000, range=[0x000000008b000000-0x000000008fa00000) (74MB)
[ 0.000000] efi: mem272: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem273: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem274: type=11, attr=0x8000000000000000, range=[0x00000000ffe70000-0x00000000ffea0000) (0MB)
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookAir5,2/Mac-2E6FAB96566FE58C, BIOS MBA51.88Z.00EF.B02.1211271028 11/27/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x26f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0A0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 090000000 mask FF0000000 uncachable
[ 0.000000] 3 base 08C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 08B000000 mask FFF000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x8b000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000090000] 90000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02fc2000, 0x02fc2fff] PGTABLE
[ 0.000000] BRK [0x02fc3000, 0x02fc3fff] PGTABLE
[ 0.000000] BRK [0x02fc4000, 0x02fc4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x26f400000-0x26f5fffff]
[ 0.000000] [mem 0x26f400000-0x26f5fffff] page 2M
[ 0.000000] BRK [0x02fc5000, 0x02fc5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x26c000000-0x26f3fffff]
[ 0.000000] [mem 0x26c000000-0x26f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x26bffffff]
[ 0.000000] [mem 0x200000000-0x26bffffff] page 2M
[ 0.000000] BRK [0x02fc6000, 0x02fc6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x40005000-0x8ad11fff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0x8abfffff] page 2M
[ 0.000000] [mem 0x8ac00000-0x8ad11fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8ad53000-0x8ad68fff]
[ 0.000000] [mem 0x8ad53000-0x8ad68fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8ad8f000-0x8ae3afff]
[ 0.000000] [mem 0x8ad8f000-0x8ae3afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8ae8f000-0x8aecdfff]
[ 0.000000] [mem 0x8ae8f000-0x8aecdfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8aeff000-0x8af91fff]
[ 0.000000] [mem 0x8aeff000-0x8af91fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8afff000-0x8affffff]
[ 0.000000] [mem 0x8afff000-0x8affffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7de6c000-0x7eefafff]
[ 0.000000] ACPI: RSDP 000000008ad8e014 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 000000008ad8e1c0 000B4 (v01 APPLE Apple00 00000000 01000013)
[ 0.000000] ACPI: FACP 000000008ad8c000 000F4 (v04 APPLE Apple00 00000000 Loki 0000005F)
[ 0.000000] ACPI: DSDT 000000008ad82000 04708 (v01 APPLE MacBookA 00050001 INTL 20100915)
[ 0.000000] ACPI: FACS 000000008ad1c000 00040
[ 0.000000] ACPI: HPET 000000008ad8b000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 000000008ad8a000 000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 000000008ad88000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 000000008ad87000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 000000008ad7f000 001EE (v01 APPLE SataAhci 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad7e000 00024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad78000 00D74 (v01 APPLE UsbSdPpt 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad77000 00159 (v02 APPLE IGHda 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad75000 00032 (v01 APPLE SsdtS3 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad73000 015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad72000 00FAA (v01 APPLE PcieTbt 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad6d000 00615 (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad6c000 00B3D (v01 PmRef CpuPm 00003000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad6b000 00315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad6a000 0037A (v01 PmRef ApTst 00003000 INTL 20100915)
[ 0.000000] ACPI: DMAR 000000008ad69000 00088 (v01 APPLE IVB 00000001 AAPL 00000001)
[ 0.000000] ACPI: MCFG 000000008ad89000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x26f5fffff]
[ 0.000000] NODE_DATA [mem 0x26f5e3000-0x26f5f6fff]
[ 0.000000] [ffffea0000000000-ffffea0009bfffff] PMD -> [ffff880266c00000-ffff88026ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x26f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008dfff]
[ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0x8ad11fff]
[ 0.000000] node 0: [mem 0x8ad53000-0x8ad68fff]
[ 0.000000] node 0: [mem 0x8ad8f000-0x8ae3afff]
[ 0.000000] node 0: [mem 0x8ae8f000-0x8aecdfff]
[ 0.000000] node 0: [mem 0x8aeff000-0x8af91fff]
[ 0.000000] node 0: [mem 0x8afff000-0x8affffff]
[ 0.000000] node 0: [mem 0x100000000-0x26f5fffff]
[ 0.000000] On node 0 totalpages: 2073155
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8819 pages used for memmap
[ 0.000000] DMA32 zone: 564390 pages, LIFO batch:31
[ 0.000000] Normal zone: 23512 pages used for memmap
[ 0.000000] Normal zone: 1504768 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87d74000-0x87d74fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87d84000-0x87d84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ad12000-0x8ad52fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ad69000-0x8ad8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ae3b000-0x8ae8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8aece000-0x8aefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8af92000-0x8affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8b000000-0x8f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8fa00000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffe6ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe70000-0xffe9ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffea0000-0xffffffff]
[ 0.000000] e820: [mem 0x8fa00000-0xe00f7fff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88026f200000 s81216 r8192 d21184 u262144
[ 0.000000] pcpu-alloc: s81216 r8192 d21184 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2040734
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-3.11.0-rc4+.img root=UUID=5ba0be6c-1f3f-45c4-8047-7dfed933d5ba ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 7876940K/8292620K available (6337K kernel code, 959K rwdata, 2796K rodata, 1320K init, 1532K bss, 415680K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-127.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2494.212 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.42 BogoMIPS (lpj=2494212)
[ 0.000008] pid_max: default: 32768 minimum: 301
[ 0.000044] init_memory_mapping: [mem 0x8ae3b000-0x8ae8efff]
[ 0.000048] [mem 0x8ae3b000-0x8ae8efff] page 4k
[ 0.000062] init_memory_mapping: [mem 0x8aece000-0x8aefefff]
[ 0.000065] [mem 0x8aece000-0x8aefefff] page 4k
[ 0.000109] init_memory_mapping: [mem 0x8b000000-0x8f9fffff]
[ 0.000112] [mem 0x8b000000-0x8f9fffff] page 2M
[ 0.031098] Security Framework initialized
[ 0.031106] SELinux: Initializing.
[ 0.031117] SELinux: Starting in permissive mode
[ 0.031794] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.034424] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.035572] Mount-cache hash table entries: 256
[ 0.035779] Initializing cgroup subsys memory
[ 0.035790] Initializing cgroup subsys devices
[ 0.035793] Initializing cgroup subsys freezer
[ 0.035796] Initializing cgroup subsys net_cls
[ 0.035801] Initializing cgroup subsys blkio
[ 0.035804] Initializing cgroup subsys perf_event
[ 0.035831] CPU: Physical Processor ID: 0
[ 0.035834] CPU: Processor Core ID: 0
[ 0.036317] mce: CPU supports 7 MCE banks
[ 0.036331] CPU0: Thermal monitoring enabled (TM1)
[ 0.036342] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.036484] Freeing SMP alternatives memory: 24K (ffffffff81e3b000 - ffffffff81e41000)
[ 0.036489] ACPI: Core revision 20130517
[ 0.043718] ACPI: All ACPI Tables successfully acquired
[ 0.053090] ftrace: allocating 24495 entries in 96 pages
[ 0.067295] dmar: Host address width 36
[ 0.067299] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.067311] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.067314] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.067321] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.067324] dmar: RMRR base: 0x0000008b800000 end: 0x0000008f9fffff
[ 0.067397] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.067399] HPET id 0 under DRHD base 0xfed91000
[ 0.067401] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled
[ 0.067404] Not enable interrupt remapping
[ 0.067406] Failed to enable irq remapping. You are vulnerable to irq-injection attacks.
[ 0.067861] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077875] smpboot: CPU0: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09)
[ 0.077886] TSC deadline timer enabled
[ 0.077898] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.077908] ... version: 3
[ 0.077910] ... bit width: 48
[ 0.077911] ... generic registers: 4
[ 0.077913] ... value mask: 0000ffffffffffff
[ 0.077915] ... max period: 0000ffffffffffff
[ 0.077917] ... fixed-purpose events: 3
[ 0.077919] ... event mask: 000000070000000f
[ 0.093289] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.079558] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.121145] Brought up 4 CPUs
[ 0.121151] smpboot: Total of 4 processors activated (19953.69 BogoMIPS)
[ 0.125420] devtmpfs: initialized
[ 0.125592] PM: Registering ACPI NVS region [mem 0x8ad12000-0x8ad52fff] (266240 bytes)
[ 0.126505] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.126535] RTC time: 22:01:33, date: 08/12/13
[ 0.126582] NET: Registered protocol family 16
[ 0.126686] ACPI: bus type PCI registered
[ 0.126690] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.126757] PCI: MMCONFIG for domain 0000 [bus 00-99] at [mem 0xe0000000-0xe99fffff] (base 0xe0000000)
[ 0.126761] PCI: not using MMCONFIG
[ 0.126764] PCI: Using configuration type 1 for base access
[ 0.127648] bio: create slab <bio-0> at 0
[ 0.127778] ACPI: Added _OSI(Module Device)
[ 0.127781] ACPI: Added _OSI(Processor Device)
[ 0.127783] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.127786] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.129163] ACPI: EC: EC description table is found, configuring boot EC
[ 0.133932] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 2.142091] ACPI: SSDT 000000008ad17190 008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
[ 2.142456] ACPI: Dynamic OEM Table Load:
[ 2.142460] ACPI: SSDT (null) 008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
[ 2.144092] ACPI: SSDT 000000008ad18710 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
[ 2.144498] ACPI: Dynamic OEM Table Load:
[ 2.144501] ACPI: SSDT (null) 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
[ 2.145944] ACPI: SSDT 000000008ad16d90 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 2.146299] ACPI: Dynamic OEM Table Load:
[ 2.146302] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 2.148425] ACPI: Interpreter enabled
[ 2.148432] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 2.148439] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 2.148455] ACPI: (supports S0 S3 S4 S5)
[ 2.148457] ACPI: Using IOAPIC for interrupt routing
[ 2.148479] PCI: MMCONFIG for domain 0000 [bus 00-99] at [mem 0xe0000000-0xe99fffff] (base 0xe0000000)
[ 2.151073] PCI: MMCONFIG at [mem 0xe0000000-0xe99fffff] reserved in ACPI motherboard resources
[ 2.179861] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.179995] ACPI: No dock devices found.
[ 2.691117] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.691415] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge
[ 2.691499] PCI host bridge to bus 0000:00
[ 2.691504] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.691507] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 2.691510] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 2.691513] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 2.691516] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 2.691519] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 2.691522] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 2.691524] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 2.691527] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 2.691530] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 2.691533] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 2.691536] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 2.691539] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 2.691542] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 2.691545] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 2.691547] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 2.691550] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 2.691553] pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff]
[ 2.691556] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 2.691567] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 2.691671] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 2.691684] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa03fffff 64bit]
[ 2.691691] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 2.691696] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 2.691805] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 2.691831] pci 0000:00:14.0: reg 0x10: [mem 0xa0600000-0xa060ffff 64bit]
[ 2.691909] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 2.691950] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 2.691994] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 2.692020] pci 0000:00:16.0: reg 0x10: [mem 0xa0617100-0xa061710f 64bit]
[ 2.692104] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.692189] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 2.692213] pci 0000:00:1a.0: reg 0x10: [mem 0xa0616c00-0xa0616fff]
[ 2.692311] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 2.692351] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2.692394] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 2.692413] pci 0000:00:1b.0: reg 0x10: [mem 0xa0610000-0xa0613fff 64bit]
[ 2.692489] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.692528] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 2.692575] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 2.692710] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.692795] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 2.692926] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 2.692977] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 2.693019] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 2.693150] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 2.693204] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 2.693249] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 2.693274] pci 0000:00:1d.0: reg 0x10: [mem 0xa0616800-0xa0616bff]
[ 2.693372] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.693413] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2.693450] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[ 2.693631] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 2.693653] pci 0000:00:1f.2: reg 0x10: [io 0x2098-0x209f]
[ 2.693664] pci 0000:00:1f.2: reg 0x14: [io 0x20bc-0x20bf]
[ 2.693674] pci 0000:00:1f.2: reg 0x18: [io 0x2090-0x2097]
[ 2.693682] pci 0000:00:1f.2: reg 0x1c: [io 0x20b8-0x20bb]
[ 2.693691] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
[ 2.693702] pci 0000:00:1f.2: reg 0x24: [mem 0xa0616000-0xa06167ff]
[ 2.693753] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.693820] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 2.693838] pci 0000:00:1f.3: reg 0x10: [mem 0xa0617000-0xa06170ff 64bit]
[ 2.693861] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 2.694022] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.694033] pci 0000:00:1c.0: bridge window [mem 0xa0500000-0xa05fffff]
[ 2.694201] pci 0000:02:00.0: [14e4:4353] type 00 class 0x028000
[ 2.694232] pci 0000:02:00.0: reg 0x10: [mem 0xa0400000-0xa0403fff 64bit]
[ 2.694392] pci 0000:02:00.0: supports D1 D2
[ 2.694393] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.694438] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 2.696702] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 2.696710] pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa04fffff]
[ 2.696817] pci 0000:00:1c.4: PCI bridge to [bus 03-99]
[ 2.696825] pci 0000:00:1c.4: bridge window [io 0x3000-0x5fff]
[ 2.696831] pci 0000:00:1c.4: bridge window [mem 0xa0700000-0xac9fffff]
[ 2.696839] pci 0000:00:1c.4: bridge window [mem 0xaca00000-0xb89fffff 64bit pref]
[ 2.696931] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 2.697050] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 2.697520] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.697589] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.697659] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.697727] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.697791] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.697851] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.697913] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.697972] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.699214] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 2.699224] ACPI: \_SB_.PCI0: notify handler is installed
[ 2.699278] Found 1 acpi root devices
[ 2.699300] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 2.699384] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.699389] vgaarb: loaded
[ 2.699390] vgaarb: bridge control possible 0000:00:02.0
[ 2.699475] SCSI subsystem initialized
[ 2.699478] ACPI: bus type ATA registered
[ 2.699521] libata version 3.00 loaded.
[ 2.699542] ACPI: bus type USB registered
[ 2.699558] usbcore: registered new interface driver usbfs
[ 2.699567] usbcore: registered new interface driver hub
[ 2.699592] usbcore: registered new device driver usb
[ 2.699668] PCI: Using ACPI for IRQ routing
[ 2.707954] PCI: pci_cache_line_size set to 64 bytes
[ 2.708044] e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff]
[ 2.708046] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 2.708048] e820: reserve RAM buffer [mem 0x87d74190-0x87ffffff]
[ 2.708049] e820: reserve RAM buffer [mem 0x8ad12000-0x8bffffff]
[ 2.708052] e820: reserve RAM buffer [mem 0x8ad69000-0x8bffffff]
[ 2.708054] e820: reserve RAM buffer [mem 0x8ae3b000-0x8bffffff]
[ 2.708057] e820: reserve RAM buffer [mem 0x8aece000-0x8bffffff]
[ 2.708059] e820: reserve RAM buffer [mem 0x8af92000-0x8bffffff]
[ 2.708060] e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff]
[ 2.708062] e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff]
[ 2.708146] NetLabel: Initializing
[ 2.708149] NetLabel: domain hash size = 128
[ 2.708151] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.708161] NetLabel: unlabeled traffic allowed by default
[ 2.708186] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.708193] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.710231] Switched to clocksource hpet
[ 2.715484] pnp: PnP ACPI init
[ 2.715499] ACPI: bus type PNP registered
[ 2.715556] pnp 00:00: [dma 4]
[ 2.715580] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.715602] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.715745] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 2.715750] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 2.715780] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.715817] system 00:04: [io 0x1000-0x100f] has been reserved
[ 2.715821] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 2.715824] system 00:04: [io 0x0500-0x057f] has been reserved
[ 2.715828] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.715850] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.715881] pnp 00:06: Plug and Play ACPI device, IDs APP0001 (active)
[ 2.716130] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.716134] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.716137] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.716140] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.716144] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
[ 2.716147] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.716150] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 2.716153] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.716157] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
[ 2.716160] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
[ 2.716164] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.718362] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[ 2.718368] system 00:08: [mem 0x40000000-0x401fffff] could not be reserved
[ 2.718373] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.718384] pnp: PnP ACPI: found 9 devices
[ 2.718388] ACPI: bus type PNP unregistered
[ 2.725147] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.725159] pci 0000:00:1c.0: bridge window [mem 0xa0500000-0xa05fffff]
[ 2.725173] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 2.725180] pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa04fffff]
[ 2.725194] pci 0000:00:1c.4: PCI bridge to [bus 03-99]
[ 2.725199] pci 0000:00:1c.4: bridge window [io 0x3000-0x5fff]
[ 2.725207] pci 0000:00:1c.4: bridge window [mem 0xa0700000-0xac9fffff]
[ 2.725214] pci 0000:00:1c.4: bridge window [mem 0xaca00000-0xb89fffff 64bit pref]
[ 2.725230] pci 0000:00:1c.0: enabling device (0000 -> 0002)
[ 2.725455] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.725458] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.725460] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.725462] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 2.725464] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 2.725466] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 2.725468] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 2.725469] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 2.725471] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 2.725473] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 2.725475] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 2.725477] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 2.725479] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 2.725481] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 2.725483] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 2.725484] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 2.725486] pci_bus 0000:00: resource 20 [mem 0x8fa00000-0xfeafffff]
[ 2.725488] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[ 2.725490] pci_bus 0000:01: resource 1 [mem 0xa0500000-0xa05fffff]
[ 2.725493] pci_bus 0000:02: resource 1 [mem 0xa0400000-0xa04fffff]
[ 2.725495] pci_bus 0000:03: resource 0 [io 0x3000-0x5fff]
[ 2.725496] pci_bus 0000:03: resource 1 [mem 0xa0700000-0xac9fffff]
[ 2.725498] pci_bus 0000:03: resource 2 [mem 0xaca00000-0xb89fffff 64bit pref]
[ 2.725536] NET: Registered protocol family 2
[ 2.725762] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.725996] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.726130] TCP: Hash tables configured (established 65536 bind 65536)
[ 2.726151] TCP: reno registered
[ 2.726169] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.726205] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.726306] NET: Registered protocol family 1
[ 2.726318] pci 0000:00:02.0: Boot video device
[ 2.726329] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 2.726394] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 2.726397] pci 0000:00:14.0: PCI INT A: no GSI
[ 2.726508] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 2.726859] PCI: CLS 256 bytes, default 64
[ 2.726916] Unpacking initramfs...
[ 3.072326] Freeing initrd memory: 16956K (ffff88007de6c000 - ffff88007eefb000)
[ 3.072339] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.072344] software IO TLB [mem 0x79e6c000-0x7de6c000] (64MB) mapped at [ffff880079e6c000-ffff88007de6bfff]
[ 3.075663] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 3.076135] Initialise module verification
[ 3.076183] audit: initializing netlink socket (disabled)
[ 3.076199] type=2000 audit(1376344895.049:1): initialized
[ 3.111579] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.113021] VFS: Disk quotas dquot_6.5.2
[ 3.113065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.113495] msgmni has been set to 15777
[ 3.113556] SELinux: Registering netfilter hooks
[ 3.114330] alg: No test for stdrng (krng)
[ 3.114343] NET: Registered protocol family 38
[ 3.114349] Key type asymmetric registered
[ 3.114352] Asymmetric key parser 'x509' registered
[ 3.114386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.114429] io scheduler noop registered
[ 3.114433] io scheduler deadline registered
[ 3.114465] io scheduler cfq registered (default)
[ 3.114589] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 3.114720] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 3.114834] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 3.114958] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 3.114968] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 3.114993] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 3.114996] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.115005] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 3.115029] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 3.115038] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 3.115049] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.115064] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.115131] efifb: probing for efifb
[ 3.116208] efifb: framebuffer at 0x90000000, mapped to 0xffffc9000a980000, using 5400k, total 5400k
[ 3.116212] efifb: mode is 1440x900x32, linelength=6144, pages=1
[ 3.116214] efifb: scrolling: redraw
[ 3.116217] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.120011] Console: switching to colour frame buffer device 180x56
[ 3.123466] fb0: EFI VGA frame buffer device
[ 3.123492] intel_idle: MWAIT substates: 0x21120
[ 3.123494] intel_idle: v0.4 model 0x3A
[ 3.123495] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.123598] ACPI: AC Adapter [ADP1] (on-line)
[ 3.123731] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 3.123786] ACPI: Lid Switch [LID0]
[ 3.123836] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.123876] ACPI: Power Button [PWRB]
[ 3.123924] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.123964] ACPI: Sleep Button [SLPB]
[ 3.124009] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.124045] ACPI: Power Button [PWRF]
[ 3.124100] ACPI: Requesting acpi_cpufreq
[ 3.126002] GHES: HEST is not enabled!
[ 3.126089] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.127516] Non-volatile memory driver v1.3
[ 3.127539] Linux agpgart interface v0.103
[ 3.128364] loop: module loaded
[ 3.128481] mei_me 0000:00:16.0: setting latency timer to 64
[ 3.128520] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 3.131527] ahci 0000:00:1f.2: version 3.0
[ 3.131697] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 3.131797] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 3.131841] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 3.131888] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.132291] scsi0 : ahci
[ 3.132387] scsi1 : ahci
[ 3.132463] scsi2 : ahci
[ 3.132562] scsi3 : ahci
[ 3.132703] scsi4 : ahci
[ 3.132870] scsi5 : ahci
[ 3.132961] ata1: SATA max UDMA/133 abar m2048@0xa0616000 port 0xa0616100 irq 44
[ 3.133011] ata2: DUMMY
[ 3.134204] ata3: DUMMY
[ 3.135418] ata4: DUMMY
[ 3.136539] ata5: DUMMY
[ 3.137656] ata6: DUMMY
[ 3.138949] libphy: Fixed MDIO Bus: probed
[ 3.140159] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.141292] ehci-pci: EHCI PCI platform driver
[ 3.142619] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 3.142628] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.143810] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.144944] ehci-pci 0000:00:1a.0: debug port 2
[ 3.150083] ehci-pci 0000:00:1a.0: cache line size of 256 is not supported
[ 3.150102] ehci-pci 0000:00:1a.0: irq 23, io mem 0xa0616c00
[ 3.156760] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.157903] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.159039] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.160272] usb usb1: Product: EHCI Host Controller
[ 3.161361] usb usb1: Manufacturer: Linux 3.11.0-rc4+ ehci_hcd
[ 3.162610] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.163887] hub 1-0:1.0: USB hub found
[ 3.164990] hub 1-0:1.0: 2 ports detected
[ 3.166356] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 3.166363] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.167342] ACPI: Battery Slot [BAT0] (battery present)
[ 3.168634] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.169702] ehci-pci 0000:00:1d.0: debug port 2
[ 3.174676] ehci-pci 0000:00:1d.0: cache line size of 256 is not supported
[ 3.174691] ehci-pci 0000:00:1d.0: irq 22, io mem 0xa0616800
[ 3.180782] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.181830] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.182876] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.183913] usb usb2: Product: EHCI Host Controller
[ 3.184934] usb usb2: Manufacturer: Linux 3.11.0-rc4+ ehci_hcd
[ 3.185949] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.187052] hub 2-0:1.0: USB hub found
[ 3.188040] hub 2-0:1.0: 2 ports detected
[ 3.189092] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.190076] ohci-pci: OHCI PCI platform driver
[ 3.191044] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.192123] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 3.193124] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 3.194130] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 3.194134] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.195144] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 3.196233] xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
[ 3.196257] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
[ 3.196310] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.197303] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.198282] usb usb3: Product: xHCI Host Controller
[ 3.199252] usb usb3: Manufacturer: Linux 3.11.0-rc4+ xhci_hcd
[ 3.200213] usb usb3: SerialNumber: 0000:00:14.0
[ 3.201265] xHCI xhci_add_endpoint called for root hub
[ 3.201266] xHCI xhci_check_bandwidth called for root hub
[ 3.201288] hub 3-0:1.0: USB hub found
[ 3.202278] hub 3-0:1.0: 4 ports detected
[ 3.203427] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.204486] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 3.205549] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.206581] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.207605] usb usb4: Product: xHCI Host Controller
[ 3.208637] usb usb4: Manufacturer: Linux 3.11.0-rc4+ xhci_hcd
[ 3.209688] usb usb4: SerialNumber: 0000:00:14.0
[ 3.210831] xHCI xhci_add_endpoint called for root hub
[ 3.210832] xHCI xhci_check_bandwidth called for root hub
[ 3.210851] hub 4-0:1.0: USB hub found
[ 3.211926] hub 4-0:1.0: 4 ports detected
[ 3.218870] usbcore: registered new interface driver usbserial
[ 3.219947] usbcore: registered new interface driver usbserial_generic
[ 3.221007] usbserial: USB Serial support registered for generic
[ 3.222089] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.444087] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.445673] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3.447226] ata1.00: ATA-8: APPLE SSD SM256E, CXM09A1Q, max UDMA/133
[ 3.448684] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.450425] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3.451996] ata1.00: configured for UDMA/133
[ 3.453570] scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM256E CXM0 PQ: 0 ANSI: 5
[ 3.454812] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 3.454829] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.457813] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.459390] sd 0:0:0:0: [sda] Write Protect is off
[ 3.460883] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.460906] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.464348] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 3.466498] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.074812] tsc: Refined TSC clocksource calibration: 2494.340 MHz
[ 4.325290] i8042: No controller found
[ 4.326519] mousedev: PS/2 mouse device common for all mice
[ 4.327939] rtc_cmos 00:05: RTC can wake from S4
[ 4.329232] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 4.330413] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 4.331662] device-mapper: uevent: version 1.0.3
[ 4.332907] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 4.334138] Intel P-state driver initializing.
[ 4.335339] Intel pstate controlling: cpu 0
[ 4.336148] Intel pstate controlling: cpu 1
[ 4.336898] Intel pstate controlling: cpu 2
[ 4.337645] Intel pstate controlling: cpu 3
[ 4.338435] cpuidle: using governor ladder
[ 4.339226] cpuidle: using governor menu
[ 4.340178] EFI Variables Facility v0.08 2004-May-17
[ 4.528338] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.642854] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.644115] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.645618] hub 1-1:1.0: USB hub found
[ 4.646855] hub 1-1:1.0: 6 ports detected
[ 4.669476] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.670190] usbcore: registered new interface driver usbhid
[ 4.670891] usbhid: USB HID core driver
[ 4.671580] drop_monitor: Initializing network drop monitor service
[ 4.672310] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.673041] TCP: cubic registered
[ 4.673756] Initializing XFRM netlink socket
[ 4.674515] NET: Registered protocol family 10
[ 4.675299] mip6: Mobile IPv6
[ 4.675968] NET: Registered protocol family 17
[ 4.676950] PM: Hibernation image not present or could not be loaded.
[ 4.676953] Loading module verification certificates
[ 4.678283] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: ae70c02fcc230b8be0e192a6571672ddcbf92a93'
[ 4.678985] registered taskstats version 1
[ 4.680288] Magic number: 9:210:47
[ 4.681090] rtc_cmos 00:05: setting system clock to 2013-08-12 22:01:37 UTC (1376344897)
[ 4.682546] Freeing unused kernel memory: 1320K (ffffffff81cf1000 - ffffffff81e3b000)
[ 4.683251] Write protecting the kernel read-only data: 12288k
[ 4.686787] Freeing unused kernel memory: 1844K (ffff880002633000 - ffff880002800000)
[ 4.689418] Freeing unused kernel memory: 1300K (ffff880002abb000 - ffff880002c00000)
[ 4.692024] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 4.750589] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.867131] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.867894] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.868907] hub 2-1:1.0: USB hub found
[ 4.869762] hub 2-1:1.0: 8 ports detected
[ 4.944974] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 5.052974] usb 1-1.1: New USB device found, idVendor=05ac, idProduct=8510
[ 5.053724] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.054470] usb 1-1.1: Product: FaceTime HD Camera (Built-in)
[ 5.055215] usb 1-1.1: Manufacturer: Apple Inc.
[ 5.055951] usb 1-1.1: SerialNumber: CCGC6H0EB0DWC8C0
[ 5.077794] Switched to clocksource tsc
[ 5.147189] usb 2-1.8: new high-speed USB device number 3 using ehci-pci
[ 5.234541] usb 2-1.8: New USB device found, idVendor=0424, idProduct=2513
[ 5.235280] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.236187] hub 2-1.8:1.0: USB hub found
[ 5.237043] hub 2-1.8:1.0: 3 ports detected
[ 5.273096] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 5.273926] systemd[1]: Running in initial RAM disk.
[ 5.276998] systemd[1]: Set hostname to <helium>.
[ 5.281872] systemd[1]: Expecting device dev-disk-by\x2duuid-5ba0be6c\x2d1f3f\x2d45c4\x2d8047\x2d7dfed933d5ba.device...
[ 5.283531] systemd[1]: Expecting device dev-disk-by\x2duuid-1b190b67\x2dc50a\x2d41e3\x2dbbd7\x2d23b1bcd04daf.device...
[ 5.285209] systemd[1]: Expecting device dev-disk-by\x2duuid-3e316c7d\x2d0409\x2d4d25\x2d9041\x2ddc1bcbac9543.device...
[ 5.286943] systemd[1]: Starting Timers.
[ 5.288685] systemd[1]: Reached target Timers.
[ 5.289559] systemd[1]: Starting udev Kernel Socket.
[ 5.291317] systemd[1]: Listening on udev Kernel Socket.
[ 5.292182] systemd[1]: Starting udev Control Socket.
[ 5.293936] systemd[1]: Listening on udev Control Socket.
[ 5.294779] systemd[1]: Starting Journal Socket.
[ 5.296559] systemd[1]: Listening on Journal Socket.
[ 5.297516] systemd[1]: Started dracut cmdline hook.
[ 5.298461] systemd[1]: Starting dracut pre-udev hook...
[ 5.300561] systemd[1]: Started Load Kernel Modules.
[ 5.301429] systemd[1]: Starting Sockets.
[ 5.303166] systemd[1]: Reached target Sockets.
[ 5.304005] systemd[1]: Starting Setup Virtual Console...
[ 5.305971] systemd[1]: Starting Journal Service...
[ 5.309491] systemd[1]: Started Journal Service.
[ 5.314909] systemd[1]: Starting Swap.
[ 5.317525] systemd[1]: Reached target Swap.
[ 5.318482] systemd[1]: Starting Local File Systems.
[ 5.320334] systemd[1]: Reached target Local File Systems.
[ 5.322404] systemd[1]: Started Setup Virtual Console.
[ 5.329301] systemd-udevd[134]: starting version 204
[ 5.414004] [drm] Initialized drm 1.1.0 20060810
[ 5.508638] [drm] Memory usable by graphics device = 2048M
[ 5.509466] checking generic (90000000 546000) vs hw (90000000 10000000)
[ 5.509467] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 5.510282] Console: switching to colour dummy device 80x25
[ 5.510373] i915 0000:00:02.0: setting latency timer to 64
[ 5.511606] usb 2-1.8.1: new full-speed USB device number 4 using ehci-pci
[ 5.542578] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 5.542584] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.542586] [drm] Driver supports precise vblank timestamp query.
[ 5.542597] ACPI Warning: \_SB_.PCI0.IGPU._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[ 5.542625] ACPI Warning: \_SB_.PCI0.IGPU._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[ 5.542663] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.598671] usb 2-1.8.1: New USB device found, idVendor=0a5c, idProduct=4500
[ 5.598676] usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.598679] usb 2-1.8.1: Product: BRCM20702 Hub
[ 5.598681] usb 2-1.8.1: Manufacturer: Apple Inc.
[ 5.598955] hub 2-1.8.1:1.0: USB hub found
[ 5.599042] hub 2-1.8.1:1.0: 3 ports detected
[ 5.652691] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 5.663410] fbcon: inteldrmfb (fb0) is primary device
[ 5.672835] usb 2-1.8.2: new full-speed USB device number 5 using ehci-pci
[ 5.765908] usb 2-1.8.2: New USB device found, idVendor=05ac, idProduct=024c
[ 5.765911] usb 2-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.765914] usb 2-1.8.2: Product: Apple Internal Keyboard / Trackpad
[ 5.765916] usb 2-1.8.2: Manufacturer: Apple Inc.
[ 5.771973] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/input/input4
[ 5.772283] apple 0003:05AC:024C.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input0
[ 5.912440] apple 0003:05AC:024C.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input1
[ 5.986160] usb 2-1.8.3: new high-speed USB device number 6 using ehci-pci
[ 6.078236] usb 2-1.8.3: New USB device found, idVendor=05ac, idProduct=8404
[ 6.078241] usb 2-1.8.3: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 6.078244] usb 2-1.8.3: Product: Card Reader
[ 6.078246] usb 2-1.8.3: Manufacturer: Apple
[ 6.078249] usb 2-1.8.3: SerialNumber: 000000000310
[ 6.097796] usb-storage 2-1.8.3:1.0: USB Mass Storage device detected
[ 6.097844] scsi6 : usb-storage 2-1.8.3:1.0
[ 6.097909] usbcore: registered new interface driver usb-storage
[ 6.152539] usb 2-1.8.1.1: new full-speed USB device number 7 using ehci-pci
[ 6.241312] usb 2-1.8.1.1: New USB device found, idVendor=05ac, idProduct=820a
[ 6.241316] usb 2-1.8.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.243383] input: HID 05ac:820a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.1/2-1.8.1.1:1.0/input/input5
[ 6.243463] hid-generic 0003:05AC:820A.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1d.0-1.8.1.1/input0
[ 6.316717] usb 2-1.8.1.2: new full-speed USB device number 8 using ehci-pci
[ 6.394846] usb 2-1.8.1.2: New USB device found, idVendor=05ac, idProduct=820b
[ 6.394849] usb 2-1.8.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.397248] input: HID 05ac:820b as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.2/2-1.8.1.2:1.0/input/input6
[ 6.397559] hid-generic 0003:05AC:820B.0004: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1d.0-1.8.1.2/input0
[ 6.470894] usb 2-1.8.1.3: new full-speed USB device number 9 using ehci-pci
[ 6.550491] usb 2-1.8.1.3: New USB device found, idVendor=05ac, idProduct=821f
[ 6.550495] usb 2-1.8.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.550498] usb 2-1.8.1.3: Product: Bluetooth USB Host Controller
[ 6.550500] usb 2-1.8.1.3: Manufacturer: Apple Inc.
[ 6.738160] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 7.122812] scsi 6:0:0:0: Direct-Access APPLE SD Card Reader 2.00 PQ: 0 ANSI: 0
[ 7.123705] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 7.125352] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 8.124551] Console: switching to colour frame buffer device 180x56
[ 8.142603] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.142605] i915 0000:00:02.0: registered panic notifier
[ 8.147872] acpi device:07: registered as cooling_device5
[ 8.149848] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 8.151513] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 8.153276] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.171626] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 8.223021] systemd-journald[118]: Received SIGTERM
[ 8.469441] SELinux: 2048 avtab hash slots, 94592 rules.
[ 8.479665] SELinux: 2048 avtab hash slots, 94592 rules.
[ 8.675181] SELinux: 8 users, 82 roles, 4527 types, 254 bools, 1 sens, 1024 cats
[ 8.675184] SELinux: 83 classes, 94592 rules
[ 8.678814] SELinux: Completing initialization.
[ 8.678816] SELinux: Setting up existing superblocks.
[ 8.678821] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 8.678824] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 8.678830] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 8.678834] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 8.678839] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.678868] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 8.679503] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 8.679506] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 8.679916] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 8.679920] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 8.679922] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 8.679933] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 8.679937] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 8.679947] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 8.679955] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 8.680145] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 8.680147] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.680158] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.680210] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.680239] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.680243] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 8.680245] SELinux: initialized (dev efivarfs, type efivarfs), uses genfs_contexts
[ 8.680253] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.680256] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.680267] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.680271] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.680273] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.680276] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.680278] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.680282] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.680288] SELinux: initialized (dev sda8, type ext4), uses xattr
[ 8.690240] type=1403 audit(1376337701.504:2): policy loaded auid=4294967295 ses=4294967295
[ 8.696294] systemd[1]: Successfully loaded SELinux policy in 347.015ms.
[ 8.706811] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 8.725398] systemd[1]: Relabelled /dev and /run in 12.876ms.
[ 8.774107] LVM: Logical Volume autoactivation enabled.
[ 8.774111] LVM: Activation generator successfully completed.
[ 8.850009] systemd-readahead[213]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 8.857229] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 8.865920] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 8.871691] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 8.875066] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.897126] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 8.899224] systemd-udevd[230]: starting version 204
[ 8.930961] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 8.979767] EXT4-fs (sda8): re-mounted. Opts: (null)
[ 9.055414] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08
[ 9.056371] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 9.057257] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 9.058122] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 9.058138] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 9.068670] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[ 9.071039] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[ 9.072693] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.104658] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 9.105913] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.107290] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 9.108664] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.112868] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 9.114035] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.115410] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.119061] bcma: bus0: Bus registered
[ 9.133681] input: bcm5974 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.2/input/input9
[ 9.135363] usbcore: registered new interface driver bcm5974
[ 9.137814] media: Linux media interface: v0.10
[ 9.172539] Linux video capture interface: v2.00
[ 9.223395] applesmc: key=424 fan=1 temp=31 index=30 acc=0 lux=2 kbd=1
[ 9.244254] Bluetooth: Core ver 2.16
[ 9.245883] NET: Registered protocol family 31
[ 9.247428] Bluetooth: HCI device and connection manager initialized
[ 9.249137] Bluetooth: HCI socket layer initialized
[ 9.250951] Bluetooth: L2CAP socket layer initialized
[ 9.252674] Bluetooth: SCO socket layer initialized
[ 9.276162] iTCO_vendor_support: vendor-support=0
[ 9.286595] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 9.287731] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 9.294755] usbcore: registered new interface driver btusb
[ 9.339751] usb 2-1.8.1.1: USB disconnect, device number 7
[ 9.352359] uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Built-in) (05ac:8510)
[ 9.364068] input: FaceTime HD Camera (Built-in) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input10
[ 9.391651] Adding 10190844k swap on /dev/sda6. Priority:-1 extents:1 across:10190844k SSFS
[ 9.422178] cfg80211: Calling CRDA to update world regulatory domain
[ 9.425715] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 9.427286] cfg80211: World regulatory domain updated:
[ 9.427286] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.427288] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.427289] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.427290] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.427291] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.427292] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.436486] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 9.465872] usbcore: registered new interface driver uvcvideo
[ 9.467080] USB Video Class driver (1.1.1)
[ 9.474489] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:speaker
[ 9.474493] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.474495] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
[ 9.474496] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
[ 9.474497] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
[ 9.474499] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0xd
[ 9.481658] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 9.482943] SELinux: initialized (dev sda5, type ext4), uses xattr
[ 9.490904] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 9.491093] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.491199] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.491269] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.491335] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.496184] SELinux: initialized (dev sda7, type ext4), uses xattr
[ 9.584445] usb 2-1.8.1.2: USB disconnect, device number 8
[ 9.628454] SELinux: initialized (dev sda4, type hfsplus), uses genfs_contexts
[ 9.654581] type=1305 audit(1376337702.467:3): audit_pid=364 old=0 auid=4294967295 ses=4294967295
subj=system_u:system_r:auditd_t:s0 res=1
[ 9.803255] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17
[ 9.829096] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.836347] systemd-logind[401]: Watching system buttons on /dev/input/event3 (Power Button)
[ 9.836423] systemd-logind[401]: Watching system buttons on /dev/input/event7 (Video Bus)
[ 9.836488] systemd-logind[401]: Watching system buttons on /dev/input/event1 (Power Button)
[ 9.836582] systemd-logind[401]: Watching system buttons on /dev/input/event0 (Lid Switch)
[ 9.836675] systemd-logind[401]: Watching system buttons on /dev/input/event2 (Sleep Button)
[ 9.861578] cfg80211: Calling CRDA for country: DE
[ 9.861609] systemd-udevd[259]: renamed network interface wlan0 to wlp2s0
[ 9.865372] cfg80211: Regulatory domain changed to country: DE
[ 9.866027] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.866710] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.867395] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.868048] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.868714] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 9.869355] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 9.941044] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.974753] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 10.030316] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.031351] Bluetooth: BNEP filters: protocol multicast
[ 10.032384] Bluetooth: BNEP socket layer initialized
[ 10.108081] Bluetooth: RFCOMM TTY layer initialized
[ 10.109120] Bluetooth: RFCOMM socket layer initialized
[ 10.110107] Bluetooth: RFCOMM ver 1.11
[ 10.149938] Netfilter messages via NETLINK v0.30.
[ 10.283807] nfnl_acct: registering with nfnetlink.
[ 10.284975] netlink: 20 bytes leftover after parsing attributes.
[ 10.310702] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 10.310716] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 10.312867] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.607019] wlp2s0: authenticate with 24:65:11:b9:d8:b1
[ 14.618187] wlp2s0: send auth to 24:65:11:b9:d8:b1 (try 1/3)
[ 14.620147] wlp2s0: authenticated
[ 14.620984] wlp2s0: associate with 24:65:11:b9:d8:b1 (try 1/3)
[ 14.623476] wlp2s0: RX AssocResp from 24:65:11:b9:d8:b1 (capab=0x431 status=0 aid=2)
[ 14.624001] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 14.624004] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 14.624013] wlp2s0: associated
[ 14.624023] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 15.668236] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 20.047431] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 20.047435] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 20.052604] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 20.052608] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 20.060881] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 20.060885] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 55.693944] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 55.693973] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 65.045849] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 65.045854] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 65.045855] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 65.045856] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 65.049597] brcmsmac bcma0:0: phyerr 0x10, rate 0x6e6e
[ 65.049606] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 67.371909] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 67.371944] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 67.375192] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 67.375202] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 68.655417] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.655422] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.655424] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 68.655426] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.656073] brcmsmac bcma0:0: phyerr 0x10, rate 0x6e6e
[ 68.656084] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 68.656123] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.656124] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.656126] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 68.656127] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.659322] brcmsmac bcma0:0: phyerr 0x10, rate 0x6e6e
[ 68.659355] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 68.659367] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.659369] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.659371] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 68.659373] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.662517] brcmsmac bcma0:0: phyerr 0x10, rate 0x6e6e
[ 68.662526] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 68.662541] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.662544] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.662547] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 68.662550] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.665234] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.665242] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.665246] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 68.665248] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.667681] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.667689] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 68.667692] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 68.667695] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.654618] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.654621] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.654623] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 69.654624] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.655034] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 69.655036] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 69.655045] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.655046] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.655048] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 69.655049] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.655626] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 69.655630] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 69.655643] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.655645] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.655646] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 69.655648] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.656640] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 69.656644] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 69.659266] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.659269] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.659270] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 69.659271] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.659709] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.659711] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 69.659712] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 69.659713] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 70.338378] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 70.338389] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 71.100021] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 71.100030] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 71.100033] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 71.100035] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 71.100561] brcmsmac bcma0:0: phyerr 0x10, rate 0x6e6e
[ 71.100564] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 71.100577] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 71.100579] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 71.100580] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 71.100582] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 71.104846] brcmsmac bcma0:0: phyerr 0x10, rate 0x6e6e
[ 71.104849] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 71.104861] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 71.104862] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 71.104863] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 71.104864] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 71.116964] brcmsmac bcma0:0: phyerr 0x10, rate 0x6e6e
[ 71.116977] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 71.693295] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 71.693307] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 71.694194] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 71.694203] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 71.695304] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 71.695314] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 72.047690] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 72.047702] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 72.048526] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 72.048534] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 72.049094] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 72.049101] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 74.875934] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 74.875938] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 74.876634] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 74.876637] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 74.877349] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 74.877351] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 84.114683] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.114698] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.114702] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.114705] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.115295] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 84.115304] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 84.115325] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.115328] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.115331] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.115333] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.115947] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 84.115954] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 84.115975] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.115977] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.115980] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.115983] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.116664] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 84.116667] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 84.116676] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.116678] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.116680] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.116682] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.117187] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.117192] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.117195] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.117198] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.117714] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.117720] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.117723] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.117725] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.442483] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.442496] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.442500] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.442503] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.442900] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 84.442907] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 84.442920] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.442923] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.442926] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.442928] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.443386] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 84.443393] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 84.443406] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.443409] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.443412] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.443414] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.443933] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 84.443939] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 84.443949] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.443952] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.443955] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.443957] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.444336] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.444342] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.444345] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.444347] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.444765] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.444771] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.444773] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 84.444776] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 84.599227] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 84.599260] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 84.600908] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 84.600936] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 85.884821] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 85.884832] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 85.884834] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 85.884836] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 85.885271] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 85.885277] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 85.885290] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 85.885292] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 85.885293] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 85.885295] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 85.886779] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 85.886806] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 85.886831] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 85.886833] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 85.886835] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 85.886838] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 85.889394] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 85.889420] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 86.368373] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 86.368377] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 86.369291] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 86.369294] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 86.370567] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 86.370569] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 88.062441] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 88.062477] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 88.063571] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 88.063598] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 88.293587] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.293597] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.293599] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 88.293601] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.294023] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 88.294027] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 88.294037] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.294039] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.294040] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 88.294042] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.294470] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 88.294474] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 88.294486] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.294488] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.294489] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 88.294491] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.295081] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 88.295099] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 88.295118] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.295131] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.295133] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 88.295134] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.298015] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.298043] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.298058] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 88.298060] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 88.519081] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 88.519093] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 88.521113] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 88.521122] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 90.222368] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 90.222382] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 90.223616] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 90.223624] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 90.224150] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 90.224157] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 91.265996] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 91.266005] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 91.266007] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 91.266009] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 91.266447] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 91.266453] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 91.266465] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 91.266467] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 91.266469] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 91.266470] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 91.270901] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 91.270935] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 91.633002] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 91.633013] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 91.634597] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 91.634604] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 91.972511] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 91.972520] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 91.973208] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 91.973236] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 91.976329] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 91.976362] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 92.622446] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 92.622458] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 92.626425] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 92.626434] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 92.630246] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 92.630255] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 94.300194] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 94.300212] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 94.300215] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 94.300217] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 94.300892] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 94.300921] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 94.300934] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 94.300936] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 94.300938] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 94.300940] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 94.301660] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 94.301688] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 94.589704] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 94.589709] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 94.675435] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 94.675444] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 94.675994] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 94.675999] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 94.676863] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 94.676868] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 98.222237] brcmsmac bcma0:0: phyerr 0x10, rate 0xa0a
[ 98.222251] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 98.227080] brcmsmac bcma0:0: phyerr 0x10, rate 0xa0a
[ 98.227087] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 98.234612] brcmsmac bcma0:0: phyerr 0x10, rate 0xa0a
[ 98.234620] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 100.252756] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.252765] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.252767] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 100.252769] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.253161] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 100.253165] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 100.253177] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.253179] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.253181] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 100.253182] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.253746] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 100.253750] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 100.253762] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.253764] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.253765] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 100.253767] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.254306] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 100.254310] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 100.254317] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.254318] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.254320] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 100.254322] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.254919] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.254921] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.254922] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 100.254923] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.255406] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.255407] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 100.255409] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 100.255410] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 105.862454] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 105.862458] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 105.863614] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 105.863616] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 105.864632] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 105.864635] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 113.664396] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.664400] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.664401] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 113.664402] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.664953] brcmsmac bcma0:0: phyerr 0x10, rate 0x6e6e
[ 113.664955] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 113.664964] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.664965] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.664966] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 113.664967] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.667733] brcmsmac bcma0:0: phyerr 0x10, rate 0x6e6e
[ 113.667769] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 113.667781] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.667783] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.667785] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 113.667787] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.674128] brcmsmac bcma0:0: phyerr 0x10, rate 0x6e6e
[ 113.674161] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 113.674187] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.674190] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.674192] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 113.674194] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.679303] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.679327] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.679330] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 113.679332] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.680555] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.680580] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 113.680582] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 113.680584] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 120.544498] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 120.544527] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 120.545461] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 120.545488] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 120.546547] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 120.546564] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 169.922332] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 169.922367] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 169.923230] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 169.923263] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 170.500260] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.500273] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.500277] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 170.500279] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.500717] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 170.500727] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 170.500738] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.500740] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.500742] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 170.500744] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.501449] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 170.501452] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 170.501462] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.501463] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.501464] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 170.501465] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.501936] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 170.501938] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 170.501946] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.501947] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 170.501948] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 170.501949] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 171.469294] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 171.469334] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 171.470312] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 171.470345] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 171.471546] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 171.471579] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 172.028852] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.028865] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.028869] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 172.028871] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.029332] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 172.029338] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 172.029350] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.029353] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.029356] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 172.029358] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.029842] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 172.029848] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 172.029861] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.029864] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.029866] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 172.029869] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.030960] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 172.030968] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 172.030981] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.030984] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 172.030987] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 172.030990] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 173.924741] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 173.924746] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 173.925318] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 173.925324] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 173.925957] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 173.925984] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 174.915637] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 174.915648] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 174.915652] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 174.915654] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 174.916232] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 174.916239] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 174.916252] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 174.916255] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 174.916258] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 174.916261] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 174.918468] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 174.918475] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 175.695446] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 175.695459] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 175.702047] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 175.702071] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 178.334594] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 178.334625] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 178.337995] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 178.338026] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 178.342781] brcmsmac bcma0:0: phyerr 0x10, rate 0x1414
[ 178.342809] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10)
[ 181.591018] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 181.591031] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 184.286560] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 184.286579] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 184.286585] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 184.286589] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 184.306942] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 184.306956] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 188.757767] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 188.757777] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 188.759566] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 188.759599] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 189.083797] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 189.083809] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 189.088675] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 189.088683] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 189.784658] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 189.784673] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 189.784677] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 189.784682] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 189.785097] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 189.785104] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 189.785119] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 189.785121] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 189.785124] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 189.785126] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 189.785999] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 189.786007] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 189.786021] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 189.786025] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 189.786027] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 189.786030] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 189.787000] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 189.787003] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 197.362481] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 197.362508] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 197.366589] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 197.366600] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 197.835236] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 197.835250] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 197.840771] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 197.840781] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 198.339768] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 198.339782] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 198.339785] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 198.339787] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 198.340187] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 198.340193] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 198.340206] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 198.340208] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 198.340210] brcmsmac bcma0:0: wl0: invalid mcs: 110
[ 198.340213] brcmsmac bcma0:0: wl0: WAR: using rate of 1 mbps
[ 198.342052] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e6e
[ 198.342063] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 199.067537] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 199.067547] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 199.069192] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 199.069227] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 199.070524] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 199.070558] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 199.859393] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 199.859405] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 199.862268] brcmsmac bcma0:0: phyerr 0x1, rate 0xa0a
[ 199.862278] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 458.912193] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 458.912221] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 458.913029] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 458.913054] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[ 458.913887] brcmsmac bcma0:0: phyerr 0x1, rate 0x1414
[ 458.913919] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
next prev parent reply other threads:[~2013-08-12 20:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-11 16:21 brcsmac kernel panic Daniel Wagner
2013-08-12 10:38 ` Arend van Spriel
2013-08-12 20:11 ` Daniel Wagner [this message]
2013-08-13 13:41 ` Arend van Spriel
2013-08-13 13:55 ` Daniel Wagner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52094156.7010905@monom.org \
--to=wagi@monom.org \
--cc=arend@broadcom.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.