From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mmc: sdhci: use the SDHCI_QUIRK_USE_WIDE8 for samsung SoC
Date: Tue, 13 Aug 2013 17:52:33 +0900 [thread overview]
Message-ID: <5209F3D1.4010406@samsung.com> (raw)
In-Reply-To: <51E8FC81.40209@samsung.com>
Dear Pantelis,
Welcome to take care of u-boot-mmc.
Could you merge this patch?
Best Regards,
Jaehoon Chung
On 07/19/2013 05:44 PM, Jaehoon Chung wrote:
> Samsung SoC is supported the WIDE8, even if Controller version is v2.0.
> So add the SDHCI_QUIRK_USE_WIDE8 for Samsung-SoC.
>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/mmc/s5p_sdhci.c | 4 +++-
> drivers/mmc/sdhci.c | 13 +++++++------
> include/sdhci.h | 3 +++
> 3 files changed, 13 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
> index e50ff92..97e153e 100644
> --- a/drivers/mmc/s5p_sdhci.c
> +++ b/drivers/mmc/s5p_sdhci.c
> @@ -84,7 +84,7 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width)
>
> host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
> SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
> - SDHCI_QUIRK_WAIT_SEND_CMD;
> + SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8;
> host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
> host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
>
> @@ -93,6 +93,8 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width)
> host->index = index;
>
> host->host_caps = MMC_MODE_HC;
> + if (bus_width == 8)
> + host->host_caps |= MMC_MODE_8BIT;
>
> return add_sdhci(host, 52000000, 400000);
> }
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> index c5631bf..9bf3052 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -270,7 +270,7 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
> if (clock == 0)
> return 0;
>
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) {
> + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
> /* Version 3.00 divisors must be a multiple of 2. */
> if (mmc->f_max <= clock)
> div = 1;
> @@ -363,10 +363,11 @@ void sdhci_set_ios(struct mmc *mmc)
> ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> if (mmc->bus_width == 8) {
> ctrl &= ~SDHCI_CTRL_4BITBUS;
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
> + if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
> + (host->quirks & SDHCI_QUIRK_USE_WIDE8))
> ctrl |= SDHCI_CTRL_8BITBUS;
> } else {
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
> + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
> ctrl &= ~SDHCI_CTRL_8BITBUS;
> if (mmc->bus_width == 4)
> ctrl |= SDHCI_CTRL_4BITBUS;
> @@ -453,7 +454,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
> if (max_clk)
> mmc->f_max = max_clk;
> else {
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
> + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
> mmc->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK)
> >> SDHCI_CLOCK_BASE_SHIFT;
> else
> @@ -468,7 +469,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
> if (min_clk)
> mmc->f_min = min_clk;
> else {
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
> + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
> mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_300;
> else
> mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_200;
> @@ -486,7 +487,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
> mmc->voltages |= host->voltages;
>
> mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) {
> + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
> if (caps & SDHCI_CAN_DO_8BIT)
> mmc->host_caps |= MMC_MODE_8BIT;
> }
> diff --git a/include/sdhci.h b/include/sdhci.h
> index cffbe53..f3f8219 100644
> --- a/include/sdhci.h
> +++ b/include/sdhci.h
> @@ -208,6 +208,8 @@
> #define SDHCI_SPEC_200 1
> #define SDHCI_SPEC_300 2
>
> +#define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK)
> +
> /*
> * End of controller registers.
> */
> @@ -226,6 +228,7 @@
> #define SDHCI_QUIRK_NO_CD (1 << 5)
> #define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6)
> #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1 << 7)
> +#define SDHCI_QUIRK_USE_WIDE8 (1 << 8)
>
> /* to make gcc happy */
> struct sdhci_host;
>
next prev parent reply other threads:[~2013-08-13 8:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-19 8:44 [U-Boot] [PATCH] mmc: sdhci: use the SDHCI_QUIRK_USE_WIDE8 for samsung SoC Jaehoon Chung
2013-08-13 8:52 ` Jaehoon Chung [this message]
2013-08-13 9:01 ` Pantelis Antoniou
2013-08-13 11:37 ` Jaehoon Chung
2013-09-05 18:09 ` Pantelis Antoniou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5209F3D1.4010406@samsung.com \
--to=jh80.chung@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.