* [PATCH v2 0/5] ARM: OMAP: DTS/HWMOD/defconfig changes for USB3 @ 2013-07-16 12:50 ` Felipe Balbi 0 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: Tony Lindgren Cc: Linux OMAP Mailing List, Linux ARM Kernel Mailing List, Linux Kernel Mailing List, Benoit Cousson, Kishon Vijay Abraham I, Felipe Balbi With these patches (plus a few others on the driver side which will be going upstream soon) I could get functional USB3 with my omap5-uevm platform. Changes since v1: - split ocp2scp dts and hwmod data into separate patches - reorganize the series in order to group DTS, hwmod and defconfig changes Benoit Cousson (1): arm: omap5: hwmod: add missing ocp2scp hwmod data Felipe Balbi (4): arm: omap5: dts: fix reg property size arm: omap5: dts: fix ocp2scp DTS data arm: omap5: dts: add palmas-usb node arm: omap2plus_defconfig: enable dwc3 and dependencies arch/arm/boot/dts/omap5-uevm.dts | 10 +++++++ arch/arm/boot/dts/omap5.dtsi | 9 +++--- arch/arm/configs/omap2plus_defconfig | 9 ++++++ arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+), 4 deletions(-) -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v2 0/5] ARM: OMAP: DTS/HWMOD/defconfig changes for USB3 @ 2013-07-16 12:50 ` Felipe Balbi 0 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: linux-arm-kernel With these patches (plus a few others on the driver side which will be going upstream soon) I could get functional USB3 with my omap5-uevm platform. Changes since v1: - split ocp2scp dts and hwmod data into separate patches - reorganize the series in order to group DTS, hwmod and defconfig changes Benoit Cousson (1): arm: omap5: hwmod: add missing ocp2scp hwmod data Felipe Balbi (4): arm: omap5: dts: fix reg property size arm: omap5: dts: fix ocp2scp DTS data arm: omap5: dts: add palmas-usb node arm: omap2plus_defconfig: enable dwc3 and dependencies arch/arm/boot/dts/omap5-uevm.dts | 10 +++++++ arch/arm/boot/dts/omap5.dtsi | 9 +++--- arch/arm/configs/omap2plus_defconfig | 9 ++++++ arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+), 4 deletions(-) -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v2 1/5] arm: omap5: dts: fix reg property size 2013-07-16 12:50 ` Felipe Balbi @ 2013-07-16 12:50 ` Felipe Balbi -1 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: Tony Lindgren Cc: Linux OMAP Mailing List, Linux ARM Kernel Mailing List, Linux Kernel Mailing List, Benoit Cousson, Kishon Vijay Abraham I, Felipe Balbi USB3 block has a 64KiB space, another 64KiB is used for the wrapper. Without this change, resource_size() will get confused and driver won't probe because size will be negative. Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/boot/dts/omap5.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e643620..5c99f19 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -637,7 +637,7 @@ omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; - reg = <0x4a020000 0x1000>; + reg = <0x4a020000 0x10000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; @@ -645,7 +645,7 @@ ranges; dwc3@4a030000 { compatible = "synopsys,dwc3"; - reg = <0x4a030000 0x1000>; + reg = <0x4a030000 0x10000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; usb-phy = <&usb2_phy>, <&usb3_phy>; tx-fifo-resize; -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v2 1/5] arm: omap5: dts: fix reg property size @ 2013-07-16 12:50 ` Felipe Balbi 0 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: linux-arm-kernel USB3 block has a 64KiB space, another 64KiB is used for the wrapper. Without this change, resource_size() will get confused and driver won't probe because size will be negative. Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/boot/dts/omap5.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e643620..5c99f19 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -637,7 +637,7 @@ omap_dwc3 at 4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; - reg = <0x4a020000 0x1000>; + reg = <0x4a020000 0x10000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; @@ -645,7 +645,7 @@ ranges; dwc3 at 4a030000 { compatible = "synopsys,dwc3"; - reg = <0x4a030000 0x1000>; + reg = <0x4a030000 0x10000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; usb-phy = <&usb2_phy>, <&usb3_phy>; tx-fifo-resize; -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v2 2/5] arm: omap5: dts: fix ocp2scp DTS data 2013-07-16 12:50 ` Felipe Balbi (?) @ 2013-07-16 12:50 ` Felipe Balbi -1 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: Tony Lindgren Cc: Linux Kernel Mailing List, Felipe Balbi, Kishon Vijay Abraham I, Benoit Cousson, Linux OMAP Mailing List, Linux ARM Kernel Mailing List this patch fixes the DTS data for ocp2scp node by adding the missing reg property. Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/boot/dts/omap5.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 5c99f19..4e41409 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -652,10 +652,11 @@ }; }; - ocp2scp { + ocp2scp@4a080000 { compatible = "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; + reg = <0x4a080000 0x20>; ranges; ti,hwmods = "ocp2scp1"; usb2_phy: usb2phy@4a084000 { -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v2 2/5] arm: omap5: dts: fix ocp2scp DTS data @ 2013-07-16 12:50 ` Felipe Balbi 0 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: Tony Lindgren Cc: Linux OMAP Mailing List, Linux ARM Kernel Mailing List, Linux Kernel Mailing List, Benoit Cousson, Kishon Vijay Abraham I, Felipe Balbi this patch fixes the DTS data for ocp2scp node by adding the missing reg property. Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/boot/dts/omap5.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 5c99f19..4e41409 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -652,10 +652,11 @@ }; }; - ocp2scp { + ocp2scp@4a080000 { compatible = "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; + reg = <0x4a080000 0x20>; ranges; ti,hwmods = "ocp2scp1"; usb2_phy: usb2phy@4a084000 { -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v2 2/5] arm: omap5: dts: fix ocp2scp DTS data @ 2013-07-16 12:50 ` Felipe Balbi 0 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: linux-arm-kernel this patch fixes the DTS data for ocp2scp node by adding the missing reg property. Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/boot/dts/omap5.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 5c99f19..4e41409 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -652,10 +652,11 @@ }; }; - ocp2scp { + ocp2scp at 4a080000 { compatible = "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; + reg = <0x4a080000 0x20>; ranges; ti,hwmods = "ocp2scp1"; usb2_phy: usb2phy at 4a084000 { -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v2 3/5] arm: omap5: dts: add palmas-usb node 2013-07-16 12:50 ` Felipe Balbi @ 2013-07-16 12:50 ` Felipe Balbi -1 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: Tony Lindgren Cc: Linux OMAP Mailing List, Linux ARM Kernel Mailing List, Linux Kernel Mailing List, Benoit Cousson, Kishon Vijay Abraham I, Felipe Balbi Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b7267..badceb8 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -272,6 +272,11 @@ interrupt-controller; #interrupt-cells = <2>; + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb"; + ti,wakeup; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -450,6 +455,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4e41409..1659246 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3@4a020000 { + usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v2 3/5] arm: omap5: dts: add palmas-usb node @ 2013-07-16 12:50 ` Felipe Balbi 0 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: linux-arm-kernel Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b7267..badceb8 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -272,6 +272,11 @@ interrupt-controller; #interrupt-cells = <2>; + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb"; + ti,wakeup; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -450,6 +455,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4e41409..1659246 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3 at 4a020000 { + usb3: omap_dwc3 at 4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v2 4/5] arm: omap5: hwmod: add missing ocp2scp hwmod data 2013-07-16 12:50 ` Felipe Balbi @ 2013-07-16 12:50 ` Felipe Balbi -1 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: Tony Lindgren Cc: Linux OMAP Mailing List, Linux ARM Kernel Mailing List, Linux Kernel Mailing List, Benoit Cousson, Kishon Vijay Abraham I, Felipe Balbi From: Benoit Cousson <benoit.cousson@linaro.org> without that hwmod data, USB3 will not in OMAP5 boards. Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index f37ae96..542eddd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1114,6 +1114,42 @@ static struct omap_hwmod omap54xx_mpu_hwmod = { }; /* + * 'ocp2scp' class + * bridge to transform ocp interface protocol to scp (serial control port) + * protocol + */ + +static struct omap_hwmod_class_sysconfig omap54xx_ocp2scp_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = { + .name = "ocp2scp", + .sysc = &omap54xx_ocp2scp_sysc, +}; + +/* ocp2scp1 */ +static struct omap_hwmod omap54xx_ocp2scp1_hwmod = { + .name = "ocp2scp1", + .class = &omap54xx_ocp2scp_hwmod_class, + .clkdm_name = "l3init_clkdm", + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* * 'timer' class * general purpose timer module with accurate 1ms tick * This class contains several variants: ['timer_1ms', 'timer'] @@ -1919,6 +1955,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_cfg -> ocp2scp1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_ocp2scp1_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_wkup -> timer1 */ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = { .master = &omap54xx_l4_wkup_hwmod, @@ -2121,6 +2165,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_per__mmc4, &omap54xx_l4_per__mmc5, &omap54xx_l4_cfg__mpu, + &omap54xx_l4_cfg__ocp2scp1, &omap54xx_l4_wkup__timer1, &omap54xx_l4_per__timer2, &omap54xx_l4_per__timer3, -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v2 4/5] arm: omap5: hwmod: add missing ocp2scp hwmod data @ 2013-07-16 12:50 ` Felipe Balbi 0 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: linux-arm-kernel From: Benoit Cousson <benoit.cousson@linaro.org> without that hwmod data, USB3 will not in OMAP5 boards. Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index f37ae96..542eddd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1114,6 +1114,42 @@ static struct omap_hwmod omap54xx_mpu_hwmod = { }; /* + * 'ocp2scp' class + * bridge to transform ocp interface protocol to scp (serial control port) + * protocol + */ + +static struct omap_hwmod_class_sysconfig omap54xx_ocp2scp_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = { + .name = "ocp2scp", + .sysc = &omap54xx_ocp2scp_sysc, +}; + +/* ocp2scp1 */ +static struct omap_hwmod omap54xx_ocp2scp1_hwmod = { + .name = "ocp2scp1", + .class = &omap54xx_ocp2scp_hwmod_class, + .clkdm_name = "l3init_clkdm", + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* * 'timer' class * general purpose timer module with accurate 1ms tick * This class contains several variants: ['timer_1ms', 'timer'] @@ -1919,6 +1955,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_cfg -> ocp2scp1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_ocp2scp1_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_wkup -> timer1 */ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = { .master = &omap54xx_l4_wkup_hwmod, @@ -2121,6 +2165,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_per__mmc4, &omap54xx_l4_per__mmc5, &omap54xx_l4_cfg__mpu, + &omap54xx_l4_cfg__ocp2scp1, &omap54xx_l4_wkup__timer1, &omap54xx_l4_per__timer2, &omap54xx_l4_per__timer3, -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v2 5/5] arm: omap2plus_defconfig: enable dwc3 and dependencies 2013-07-16 12:50 ` Felipe Balbi @ 2013-07-16 12:50 ` Felipe Balbi -1 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: Tony Lindgren Cc: Linux OMAP Mailing List, Linux ARM Kernel Mailing List, Linux Kernel Mailing List, Benoit Cousson, Kishon Vijay Abraham I, Felipe Balbi DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/configs/omap2plus_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 5339e6a..aed3cce 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -81,6 +81,7 @@ CONFIG_CMA=y CONFIG_CONNECTOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_OMAP_OCP2SCP=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y @@ -167,9 +168,11 @@ CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -222,10 +225,14 @@ CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y +CONFIG_USB_DWC3=m +CONFIG_USB_DWC3_OMAP=m CONFIG_USB_TEST=y CONFIG_USB_PHY=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GADGET=y +CONFIG_OMAP_USB2=y +CONFIG_OMAP_USB3=y CONFIG_USB_GADGET_DEBUG=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y @@ -258,6 +265,8 @@ CONFIG_TI_THERMAL=y CONFIG_OMAP4_THERMAL=y CONFIG_OMAP5_THERMAL=y CONFIG_DRA752_THERMAL=y +CONFIG_EXTCON=y +CONFIG_EXTCON_PALMAS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v2 5/5] arm: omap2plus_defconfig: enable dwc3 and dependencies @ 2013-07-16 12:50 ` Felipe Balbi 0 siblings, 0 replies; 40+ messages in thread From: Felipe Balbi @ 2013-07-16 12:50 UTC (permalink / raw) To: linux-arm-kernel DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/configs/omap2plus_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 5339e6a..aed3cce 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -81,6 +81,7 @@ CONFIG_CMA=y CONFIG_CONNECTOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_OMAP_OCP2SCP=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y @@ -167,9 +168,11 @@ CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -222,10 +225,14 @@ CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y +CONFIG_USB_DWC3=m +CONFIG_USB_DWC3_OMAP=m CONFIG_USB_TEST=y CONFIG_USB_PHY=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GADGET=y +CONFIG_OMAP_USB2=y +CONFIG_OMAP_USB3=y CONFIG_USB_GADGET_DEBUG=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y @@ -258,6 +265,8 @@ CONFIG_TI_THERMAL=y CONFIG_OMAP4_THERMAL=y CONFIG_OMAP5_THERMAL=y CONFIG_DRA752_THERMAL=y +CONFIG_EXTCON=y +CONFIG_EXTCON_PALMAS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -- 1.8.3.3.754.g9c3c367 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PATCH v2 5/5] arm: omap2plus_defconfig: enable dwc3 and dependencies 2013-07-16 12:50 ` Felipe Balbi @ 2013-08-21 12:53 ` Tony Lindgren -1 siblings, 0 replies; 40+ messages in thread From: Tony Lindgren @ 2013-08-21 12:53 UTC (permalink / raw) To: Felipe Balbi Cc: Linux OMAP Mailing List, Linux ARM Kernel Mailing List, Linux Kernel Mailing List, Benoit Cousson, Kishon Vijay Abraham I * Felipe Balbi <balbi@ti.com> [130716 05:57]: > DWC3 enables USB3 functionality for OMAP5 boards, > it's safe to enable those drivers in omap2plus_defconfig. > > Signed-off-by: Felipe Balbi <balbi@ti.com> Looks like Benoit will take this, so: Acked-by: Tony Lindgren <tony@atomide.com> > --- > arch/arm/configs/omap2plus_defconfig | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig > index 5339e6a..aed3cce 100644 > --- a/arch/arm/configs/omap2plus_defconfig > +++ b/arch/arm/configs/omap2plus_defconfig > @@ -81,6 +81,7 @@ CONFIG_CMA=y > CONFIG_CONNECTOR=y > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > +CONFIG_OMAP_OCP2SCP=y > CONFIG_MTD=y > CONFIG_MTD_CMDLINE_PARTS=y > CONFIG_MTD_CHAR=y > @@ -167,9 +168,11 @@ CONFIG_THERMAL_GOV_USER_SPACE=y > CONFIG_CPU_THERMAL=y > CONFIG_OMAP_WATCHDOG=y > CONFIG_TWL4030_WATCHDOG=y > +CONFIG_MFD_PALMAS=y > CONFIG_MFD_TPS65217=y > CONFIG_MFD_TPS65910=y > CONFIG_TWL6040_CORE=y > +CONFIG_REGULATOR_PALMAS=y > CONFIG_REGULATOR_TWL4030=y > CONFIG_REGULATOR_TPS65023=y > CONFIG_REGULATOR_TPS6507X=y > @@ -222,10 +225,14 @@ CONFIG_USB_MON=y > CONFIG_USB_WDM=y > CONFIG_USB_STORAGE=y > CONFIG_USB_LIBUSUAL=y > +CONFIG_USB_DWC3=m > +CONFIG_USB_DWC3_OMAP=m > CONFIG_USB_TEST=y > CONFIG_USB_PHY=y > CONFIG_NOP_USB_XCEIV=y > CONFIG_USB_GADGET=y > +CONFIG_OMAP_USB2=y > +CONFIG_OMAP_USB3=y > CONFIG_USB_GADGET_DEBUG=y > CONFIG_USB_GADGET_DEBUG_FILES=y > CONFIG_USB_GADGET_DEBUG_FS=y > @@ -258,6 +265,8 @@ CONFIG_TI_THERMAL=y > CONFIG_OMAP4_THERMAL=y > CONFIG_OMAP5_THERMAL=y > CONFIG_DRA752_THERMAL=y > +CONFIG_EXTCON=y > +CONFIG_EXTCON_PALMAS=y > CONFIG_EXT2_FS=y > CONFIG_EXT3_FS=y > # CONFIG_EXT3_FS_XATTR is not set > -- > 1.8.3.3.754.g9c3c367 > ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v2 5/5] arm: omap2plus_defconfig: enable dwc3 and dependencies @ 2013-08-21 12:53 ` Tony Lindgren 0 siblings, 0 replies; 40+ messages in thread From: Tony Lindgren @ 2013-08-21 12:53 UTC (permalink / raw) To: linux-arm-kernel * Felipe Balbi <balbi@ti.com> [130716 05:57]: > DWC3 enables USB3 functionality for OMAP5 boards, > it's safe to enable those drivers in omap2plus_defconfig. > > Signed-off-by: Felipe Balbi <balbi@ti.com> Looks like Benoit will take this, so: Acked-by: Tony Lindgren <tony@atomide.com> > --- > arch/arm/configs/omap2plus_defconfig | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig > index 5339e6a..aed3cce 100644 > --- a/arch/arm/configs/omap2plus_defconfig > +++ b/arch/arm/configs/omap2plus_defconfig > @@ -81,6 +81,7 @@ CONFIG_CMA=y > CONFIG_CONNECTOR=y > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > +CONFIG_OMAP_OCP2SCP=y > CONFIG_MTD=y > CONFIG_MTD_CMDLINE_PARTS=y > CONFIG_MTD_CHAR=y > @@ -167,9 +168,11 @@ CONFIG_THERMAL_GOV_USER_SPACE=y > CONFIG_CPU_THERMAL=y > CONFIG_OMAP_WATCHDOG=y > CONFIG_TWL4030_WATCHDOG=y > +CONFIG_MFD_PALMAS=y > CONFIG_MFD_TPS65217=y > CONFIG_MFD_TPS65910=y > CONFIG_TWL6040_CORE=y > +CONFIG_REGULATOR_PALMAS=y > CONFIG_REGULATOR_TWL4030=y > CONFIG_REGULATOR_TPS65023=y > CONFIG_REGULATOR_TPS6507X=y > @@ -222,10 +225,14 @@ CONFIG_USB_MON=y > CONFIG_USB_WDM=y > CONFIG_USB_STORAGE=y > CONFIG_USB_LIBUSUAL=y > +CONFIG_USB_DWC3=m > +CONFIG_USB_DWC3_OMAP=m > CONFIG_USB_TEST=y > CONFIG_USB_PHY=y > CONFIG_NOP_USB_XCEIV=y > CONFIG_USB_GADGET=y > +CONFIG_OMAP_USB2=y > +CONFIG_OMAP_USB3=y > CONFIG_USB_GADGET_DEBUG=y > CONFIG_USB_GADGET_DEBUG_FILES=y > CONFIG_USB_GADGET_DEBUG_FS=y > @@ -258,6 +265,8 @@ CONFIG_TI_THERMAL=y > CONFIG_OMAP4_THERMAL=y > CONFIG_OMAP5_THERMAL=y > CONFIG_DRA752_THERMAL=y > +CONFIG_EXTCON=y > +CONFIG_EXTCON_PALMAS=y > CONFIG_EXT2_FS=y > CONFIG_EXT3_FS=y > # CONFIG_EXT3_FS_XATTR is not set > -- > 1.8.3.3.754.g9c3c367 > ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3] arm: omap5: dts: add palmas-usb node 2013-07-16 12:50 ` Felipe Balbi (?) @ 2013-08-12 10:17 ` Kishon Vijay Abraham I -1 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-12 10:17 UTC (permalink / raw) To: benoit.cousson, tony Cc: mark.rutland, devicetree, linux, ian.campbell, pawel.moll, swarren, linux-kernel, rob.herring, kishon, balbi, linux-omap, linux-arm-kernel From: Felipe Balbi <balbi@ti.com> Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. [ kishon@ti.com : fix vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Change from v2: fix vbus-supply value after SMPS10 is modeled as 2 regulators. This is needed after SMPS10 is modeled as 2 regulators. [1] models SMPS10 as 2 regulators. [2] splits the SMPS10 node into two to represent the 2 regulators. [1] -> http://comments.gmane.org/gmane.linux.kernel/1542521 [2] -> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg93779.html arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b7267..51a4acc 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -272,6 +272,11 @@ interrupt-controller; #interrupt-cells = <2>; + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb"; + ti,wakeup; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -450,6 +455,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4e41409..1659246 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3@4a020000 { + usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3] arm: omap5: dts: add palmas-usb node @ 2013-08-12 10:17 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-12 10:17 UTC (permalink / raw) To: benoit.cousson, tony Cc: rob.herring, pawel.moll, mark.rutland, swarren, ian.campbell, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, kishon, balbi From: Felipe Balbi <balbi@ti.com> Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. [ kishon@ti.com : fix vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Change from v2: fix vbus-supply value after SMPS10 is modeled as 2 regulators. This is needed after SMPS10 is modeled as 2 regulators. [1] models SMPS10 as 2 regulators. [2] splits the SMPS10 node into two to represent the 2 regulators. [1] -> http://comments.gmane.org/gmane.linux.kernel/1542521 [2] -> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg93779.html arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b7267..51a4acc 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -272,6 +272,11 @@ interrupt-controller; #interrupt-cells = <2>; + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb"; + ti,wakeup; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -450,6 +455,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4e41409..1659246 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3@4a020000 { + usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3] arm: omap5: dts: add palmas-usb node @ 2013-08-12 10:17 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-12 10:17 UTC (permalink / raw) To: linux-arm-kernel From: Felipe Balbi <balbi@ti.com> Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. [ kishon at ti.com : fix vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Change from v2: fix vbus-supply value after SMPS10 is modeled as 2 regulators. This is needed after SMPS10 is modeled as 2 regulators. [1] models SMPS10 as 2 regulators. [2] splits the SMPS10 node into two to represent the 2 regulators. [1] -> http://comments.gmane.org/gmane.linux.kernel/1542521 [2] -> http://www.mail-archive.com/linux-omap at vger.kernel.org/msg93779.html arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b7267..51a4acc 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -272,6 +272,11 @@ interrupt-controller; #interrupt-cells = <2>; + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb"; + ti,wakeup; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -450,6 +455,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4e41409..1659246 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3 at 4a020000 { + usb3: omap_dwc3 at 4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PATCH v3] arm: omap5: dts: add palmas-usb node 2013-08-12 10:17 ` Kishon Vijay Abraham I @ 2013-08-12 23:09 ` Stephen Warren -1 siblings, 0 replies; 40+ messages in thread From: Stephen Warren @ 2013-08-12 23:09 UTC (permalink / raw) To: Kishon Vijay Abraham I Cc: benoit.cousson, tony, rob.herring, pawel.moll, mark.rutland, ian.campbell, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, balbi On 08/12/2013 04:17 AM, Kishon Vijay Abraham I wrote: > From: Felipe Balbi <balbi@ti.com> > > Without this node, there will be no palmas > driver to notify dwc3 that a cable has > been connected and, without that, dwc3 > will never initialize. > diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts > interrupt-controller; > #interrupt-cells = <2>; > > + extcon_usb3: palmas_usb { > + compatible = "ti,palmas-usb"; This isn't so much a comment on this patch as the Palmas binding: Presumably, the Palmas device contains a USB VID detector, not a whole USB controller. I'd expect the compatible value to indicate this more directly, i.e. be something like ti,palmas-usb-vid or ti,palmas-usb-vid-detector. ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3] arm: omap5: dts: add palmas-usb node @ 2013-08-12 23:09 ` Stephen Warren 0 siblings, 0 replies; 40+ messages in thread From: Stephen Warren @ 2013-08-12 23:09 UTC (permalink / raw) To: linux-arm-kernel On 08/12/2013 04:17 AM, Kishon Vijay Abraham I wrote: > From: Felipe Balbi <balbi@ti.com> > > Without this node, there will be no palmas > driver to notify dwc3 that a cable has > been connected and, without that, dwc3 > will never initialize. > diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts > interrupt-controller; > #interrupt-cells = <2>; > > + extcon_usb3: palmas_usb { > + compatible = "ti,palmas-usb"; This isn't so much a comment on this patch as the Palmas binding: Presumably, the Palmas device contains a USB VID detector, not a whole USB controller. I'd expect the compatible value to indicate this more directly, i.e. be something like ti,palmas-usb-vid or ti,palmas-usb-vid-detector. ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* 2013-08-12 10:17 ` Kishon Vijay Abraham I (?) @ 2013-08-13 5:37 ` Kishon Vijay Abraham I -1 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-13 5:37 UTC (permalink / raw) To: benoit.cousson, tony, swarren, myungjoo.ham, cw00.choi Cc: rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, kishon, balbi The Palmas device contains only a USB VID detector, so added a compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible types for backward compatibility. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Documentation/devicetree/bindings/extcon/extcon-twl.txt | 3 ++- drivers/extcon/extcon-palmas.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt index 58f531a..5be4afc 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-twl.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-twl.txt @@ -2,7 +2,8 @@ EXTCON FOR TWL CHIPS PALMAS USB COMPARATOR Required Properties: - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or + "ti,palmas-usb-vid". - vbus-supply : phandle to the regulator device tree node. Optional Properties: diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index b752a0a..4f83fae 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -223,6 +223,7 @@ static int palmas_usb_remove(struct platform_device *pdev) static struct of_device_id of_palmas_match_tbl[] = { { .compatible = "ti,palmas-usb", }, + { .compatible = "ti,palmas-usb-vid", }, { .compatible = "ti,twl6035-usb", }, { /* end */ } }; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* @ 2013-08-13 5:37 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-13 5:37 UTC (permalink / raw) To: benoit.cousson, tony, swarren, myungjoo.ham, cw00.choi Cc: rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, kishon, balbi The Palmas device contains only a USB VID detector, so added a compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible types for backward compatibility. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Documentation/devicetree/bindings/extcon/extcon-twl.txt | 3 ++- drivers/extcon/extcon-palmas.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt index 58f531a..5be4afc 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-twl.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-twl.txt @@ -2,7 +2,8 @@ EXTCON FOR TWL CHIPS PALMAS USB COMPARATOR Required Properties: - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or + "ti,palmas-usb-vid". - vbus-supply : phandle to the regulator device tree node. Optional Properties: diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index b752a0a..4f83fae 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -223,6 +223,7 @@ static int palmas_usb_remove(struct platform_device *pdev) static struct of_device_id of_palmas_match_tbl[] = { { .compatible = "ti,palmas-usb", }, + { .compatible = "ti,palmas-usb-vid", }, { .compatible = "ti,twl6035-usb", }, { /* end */ } }; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* @ 2013-08-13 5:37 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-13 5:37 UTC (permalink / raw) To: linux-arm-kernel The Palmas device contains only a USB VID detector, so added a compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible types for backward compatibility. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Documentation/devicetree/bindings/extcon/extcon-twl.txt | 3 ++- drivers/extcon/extcon-palmas.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt index 58f531a..5be4afc 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-twl.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-twl.txt @@ -2,7 +2,8 @@ EXTCON FOR TWL CHIPS PALMAS USB COMPARATOR Required Properties: - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or + "ti,palmas-usb-vid". - vbus-supply : phandle to the regulator device tree node. Optional Properties: diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index b752a0a..4f83fae 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -223,6 +223,7 @@ static int palmas_usb_remove(struct platform_device *pdev) static struct of_device_id of_palmas_match_tbl[] = { { .compatible = "ti,palmas-usb", }, + { .compatible = "ti,palmas-usb-vid", }, { .compatible = "ti,twl6035-usb", }, { /* end */ } }; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v4 2/2] arm: omap5: dts: add palmas-usb node 2013-08-13 5:37 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Kishon Vijay Abraham I (?) @ 2013-08-13 5:37 ` Kishon Vijay Abraham I -1 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-13 5:37 UTC (permalink / raw) To: benoit.cousson, tony, swarren, myungjoo.ham, cw00.choi Cc: rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, kishon, balbi From: Felipe Balbi <balbi@ti.com> Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. [ kishon@ti.com : fix vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Changes from v3: * Changed the compatible type to ti,palmas-usb-vid Changes from v2: fix vbus-supply value after SMPS10 is modeled as 2 regulators. This is needed after SMPS10 is modeled as 2 regulators. [1] models SMPS10 as 2 regulators. [2] splits the SMPS10 node into two to represent the 2 regulators. [1] -> http://comments.gmane.org/gmane.linux.kernel/1542521 [2] -> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg93779.html arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index e8704bc..c18ea50 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -272,6 +272,11 @@ interrupt-controller; #interrupt-cells = <2>; + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,wakeup; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -460,6 +465,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4e41409..1659246 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3@4a020000 { + usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v4 2/2] arm: omap5: dts: add palmas-usb node @ 2013-08-13 5:37 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-13 5:37 UTC (permalink / raw) To: benoit.cousson, tony, swarren, myungjoo.ham, cw00.choi Cc: rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, kishon, balbi From: Felipe Balbi <balbi@ti.com> Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. [ kishon@ti.com : fix vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Changes from v3: * Changed the compatible type to ti,palmas-usb-vid Changes from v2: fix vbus-supply value after SMPS10 is modeled as 2 regulators. This is needed after SMPS10 is modeled as 2 regulators. [1] models SMPS10 as 2 regulators. [2] splits the SMPS10 node into two to represent the 2 regulators. [1] -> http://comments.gmane.org/gmane.linux.kernel/1542521 [2] -> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg93779.html arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index e8704bc..c18ea50 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -272,6 +272,11 @@ interrupt-controller; #interrupt-cells = <2>; + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,wakeup; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -460,6 +465,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4e41409..1659246 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3@4a020000 { + usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v4 2/2] arm: omap5: dts: add palmas-usb node @ 2013-08-13 5:37 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-13 5:37 UTC (permalink / raw) To: linux-arm-kernel From: Felipe Balbi <balbi@ti.com> Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. [ kishon at ti.com : fix vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Changes from v3: * Changed the compatible type to ti,palmas-usb-vid Changes from v2: fix vbus-supply value after SMPS10 is modeled as 2 regulators. This is needed after SMPS10 is modeled as 2 regulators. [1] models SMPS10 as 2 regulators. [2] splits the SMPS10 node into two to represent the 2 regulators. [1] -> http://comments.gmane.org/gmane.linux.kernel/1542521 [2] -> http://www.mail-archive.com/linux-omap at vger.kernel.org/msg93779.html arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index e8704bc..c18ea50 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -272,6 +272,11 @@ interrupt-controller; #interrupt-cells = <2>; + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,wakeup; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -460,6 +465,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4e41409..1659246 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3 at 4a020000 { + usb3: omap_dwc3 at 4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* 2013-08-13 5:37 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Kishon Vijay Abraham I @ 2013-08-13 9:54 ` Chanwoo Choi -1 siblings, 0 replies; 40+ messages in thread From: Chanwoo Choi @ 2013-08-13 9:54 UTC (permalink / raw) To: Kishon Vijay Abraham I Cc: benoit.cousson, tony, swarren, myungjoo.ham, rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, balbi Hi Kishon, On 08/13/2013 02:37 PM, Kishon Vijay Abraham I wrote: > The Palmas device contains only a USB VID detector, so added a > compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible > types for backward compatibility. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > Documentation/devicetree/bindings/extcon/extcon-twl.txt | 3 ++- > drivers/extcon/extcon-palmas.c | 1 + > 2 files changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > index 58f531a..5be4afc 100644 > --- a/Documentation/devicetree/bindings/extcon/extcon-twl.txt > +++ b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > @@ -2,7 +2,8 @@ EXTCON FOR TWL CHIPS > > PALMAS USB COMPARATOR > Required Properties: > - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" > + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or > + "ti,palmas-usb-vid". > - vbus-supply : phandle to the regulator device tree node. > > Optional Properties: > diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c > index b752a0a..4f83fae 100644 > --- a/drivers/extcon/extcon-palmas.c > +++ b/drivers/extcon/extcon-palmas.c > @@ -223,6 +223,7 @@ static int palmas_usb_remove(struct platform_device *pdev) > > static struct of_device_id of_palmas_match_tbl[] = { > { .compatible = "ti,palmas-usb", }, > + { .compatible = "ti,palmas-usb-vid", }, > { .compatible = "ti,twl6035-usb", }, > { /* end */ } > }; > This patch has a conflict. You have to always implement patch on extcon branch including latest patch. You need to resend v2 patch based on extcon-next branch. 'extcon-twl.txt' is renamed as 'extcon-palmas.txt' on following patch: http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=80d644b297dc26c5126858555044edef76f4ffe8 And, 'vbus-supply' phandle was removed on following patch: http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=26ece4f0b7d2264282d9077d1843ff1e98189b6c Thanks, Chanwoo Choi ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* @ 2013-08-13 9:54 ` Chanwoo Choi 0 siblings, 0 replies; 40+ messages in thread From: Chanwoo Choi @ 2013-08-13 9:54 UTC (permalink / raw) To: linux-arm-kernel Hi Kishon, On 08/13/2013 02:37 PM, Kishon Vijay Abraham I wrote: > The Palmas device contains only a USB VID detector, so added a > compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible > types for backward compatibility. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > Documentation/devicetree/bindings/extcon/extcon-twl.txt | 3 ++- > drivers/extcon/extcon-palmas.c | 1 + > 2 files changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > index 58f531a..5be4afc 100644 > --- a/Documentation/devicetree/bindings/extcon/extcon-twl.txt > +++ b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > @@ -2,7 +2,8 @@ EXTCON FOR TWL CHIPS > > PALMAS USB COMPARATOR > Required Properties: > - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" > + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or > + "ti,palmas-usb-vid". > - vbus-supply : phandle to the regulator device tree node. > > Optional Properties: > diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c > index b752a0a..4f83fae 100644 > --- a/drivers/extcon/extcon-palmas.c > +++ b/drivers/extcon/extcon-palmas.c > @@ -223,6 +223,7 @@ static int palmas_usb_remove(struct platform_device *pdev) > > static struct of_device_id of_palmas_match_tbl[] = { > { .compatible = "ti,palmas-usb", }, > + { .compatible = "ti,palmas-usb-vid", }, > { .compatible = "ti,twl6035-usb", }, > { /* end */ } > }; > This patch has a conflict. You have to always implement patch on extcon branch including latest patch. You need to resend v2 patch based on extcon-next branch. 'extcon-twl.txt' is renamed as 'extcon-palmas.txt' on following patch: http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=80d644b297dc26c5126858555044edef76f4ffe8 And, 'vbus-supply' phandle was removed on following patch: http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=26ece4f0b7d2264282d9077d1843ff1e98189b6c Thanks, Chanwoo Choi ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* 2013-08-13 9:54 ` Chanwoo Choi (?) @ 2013-08-13 9:58 ` Kishon Vijay Abraham I -1 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-13 9:58 UTC (permalink / raw) To: Chanwoo Choi Cc: benoit.cousson, tony, swarren, myungjoo.ham, rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, balbi On Tuesday 13 August 2013 03:24 PM, Chanwoo Choi wrote: > Hi Kishon, > > On 08/13/2013 02:37 PM, Kishon Vijay Abraham I wrote: >> The Palmas device contains only a USB VID detector, so added a >> compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible >> types for backward compatibility. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> --- >> Documentation/devicetree/bindings/extcon/extcon-twl.txt | 3 ++- >> drivers/extcon/extcon-palmas.c | 1 + >> 2 files changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> index 58f531a..5be4afc 100644 >> --- a/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> +++ b/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> @@ -2,7 +2,8 @@ EXTCON FOR TWL CHIPS >> >> PALMAS USB COMPARATOR >> Required Properties: >> - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" >> + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or >> + "ti,palmas-usb-vid". >> - vbus-supply : phandle to the regulator device tree node. >> >> Optional Properties: >> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c >> index b752a0a..4f83fae 100644 >> --- a/drivers/extcon/extcon-palmas.c >> +++ b/drivers/extcon/extcon-palmas.c >> @@ -223,6 +223,7 @@ static int palmas_usb_remove(struct platform_device *pdev) >> >> static struct of_device_id of_palmas_match_tbl[] = { >> { .compatible = "ti,palmas-usb", }, >> + { .compatible = "ti,palmas-usb-vid", }, >> { .compatible = "ti,twl6035-usb", }, >> { /* end */ } >> }; >> > > This patch has a conflict. You have to always implement patch on extcon branch > including latest patch. You need to resend v2 patch based on extcon-next branch. > > 'extcon-twl.txt' is renamed as 'extcon-palmas.txt' on following patch: > http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=80d644b297dc26c5126858555044edef76f4ffe8 > > And, 'vbus-supply' phandle was removed on following patch: > http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=26ece4f0b7d2264282d9077d1843ff1e98189b6c Alright. I'll send the patch shortly. Thanks Kishon ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* @ 2013-08-13 9:58 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-13 9:58 UTC (permalink / raw) To: Chanwoo Choi Cc: benoit.cousson, tony, swarren, myungjoo.ham, rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, balbi On Tuesday 13 August 2013 03:24 PM, Chanwoo Choi wrote: > Hi Kishon, > > On 08/13/2013 02:37 PM, Kishon Vijay Abraham I wrote: >> The Palmas device contains only a USB VID detector, so added a >> compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible >> types for backward compatibility. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> --- >> Documentation/devicetree/bindings/extcon/extcon-twl.txt | 3 ++- >> drivers/extcon/extcon-palmas.c | 1 + >> 2 files changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> index 58f531a..5be4afc 100644 >> --- a/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> +++ b/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> @@ -2,7 +2,8 @@ EXTCON FOR TWL CHIPS >> >> PALMAS USB COMPARATOR >> Required Properties: >> - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" >> + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or >> + "ti,palmas-usb-vid". >> - vbus-supply : phandle to the regulator device tree node. >> >> Optional Properties: >> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c >> index b752a0a..4f83fae 100644 >> --- a/drivers/extcon/extcon-palmas.c >> +++ b/drivers/extcon/extcon-palmas.c >> @@ -223,6 +223,7 @@ static int palmas_usb_remove(struct platform_device *pdev) >> >> static struct of_device_id of_palmas_match_tbl[] = { >> { .compatible = "ti,palmas-usb", }, >> + { .compatible = "ti,palmas-usb-vid", }, >> { .compatible = "ti,twl6035-usb", }, >> { /* end */ } >> }; >> > > This patch has a conflict. You have to always implement patch on extcon branch > including latest patch. You need to resend v2 patch based on extcon-next branch. > > 'extcon-twl.txt' is renamed as 'extcon-palmas.txt' on following patch: > http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=80d644b297dc26c5126858555044edef76f4ffe8 > > And, 'vbus-supply' phandle was removed on following patch: > http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=26ece4f0b7d2264282d9077d1843ff1e98189b6c Alright. I'll send the patch shortly. Thanks Kishon ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* @ 2013-08-13 9:58 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-13 9:58 UTC (permalink / raw) To: linux-arm-kernel On Tuesday 13 August 2013 03:24 PM, Chanwoo Choi wrote: > Hi Kishon, > > On 08/13/2013 02:37 PM, Kishon Vijay Abraham I wrote: >> The Palmas device contains only a USB VID detector, so added a >> compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible >> types for backward compatibility. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> --- >> Documentation/devicetree/bindings/extcon/extcon-twl.txt | 3 ++- >> drivers/extcon/extcon-palmas.c | 1 + >> 2 files changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> index 58f531a..5be4afc 100644 >> --- a/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> +++ b/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> @@ -2,7 +2,8 @@ EXTCON FOR TWL CHIPS >> >> PALMAS USB COMPARATOR >> Required Properties: >> - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" >> + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or >> + "ti,palmas-usb-vid". >> - vbus-supply : phandle to the regulator device tree node. >> >> Optional Properties: >> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c >> index b752a0a..4f83fae 100644 >> --- a/drivers/extcon/extcon-palmas.c >> +++ b/drivers/extcon/extcon-palmas.c >> @@ -223,6 +223,7 @@ static int palmas_usb_remove(struct platform_device *pdev) >> >> static struct of_device_id of_palmas_match_tbl[] = { >> { .compatible = "ti,palmas-usb", }, >> + { .compatible = "ti,palmas-usb-vid", }, >> { .compatible = "ti,twl6035-usb", }, >> { /* end */ } >> }; >> > > This patch has a conflict. You have to always implement patch on extcon branch > including latest patch. You need to resend v2 patch based on extcon-next branch. > > 'extcon-twl.txt' is renamed as 'extcon-palmas.txt' on following patch: > http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=80d644b297dc26c5126858555044edef76f4ffe8 > > And, 'vbus-supply' phandle was removed on following patch: > http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=26ece4f0b7d2264282d9077d1843ff1e98189b6c Alright. I'll send the patch shortly. Thanks Kishon ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* 2013-08-13 5:37 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Kishon Vijay Abraham I @ 2013-08-13 19:13 ` Stephen Warren -1 siblings, 0 replies; 40+ messages in thread From: Stephen Warren @ 2013-08-13 19:13 UTC (permalink / raw) To: Kishon Vijay Abraham I Cc: benoit.cousson, tony, myungjoo.ham, cw00.choi, rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, balbi On 08/12/2013 11:37 PM, Kishon Vijay Abraham I wrote: > The Palmas device contains only a USB VID detector, so added a > compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible s/Dint/Didn't/ > diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > PALMAS USB COMPARATOR > Required Properties: > - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" > + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or > + "ti,palmas-usb-vid". So are ti,palmas-usb and ti,twl6035-usb full EHCI controllers then? ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* @ 2013-08-13 19:13 ` Stephen Warren 0 siblings, 0 replies; 40+ messages in thread From: Stephen Warren @ 2013-08-13 19:13 UTC (permalink / raw) To: linux-arm-kernel On 08/12/2013 11:37 PM, Kishon Vijay Abraham I wrote: > The Palmas device contains only a USB VID detector, so added a > compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible s/Dint/Didn't/ > diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > PALMAS USB COMPARATOR > Required Properties: > - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" > + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or > + "ti,palmas-usb-vid". So are ti,palmas-usb and ti,twl6035-usb full EHCI controllers then? ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* 2013-08-13 19:13 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Stephen Warren (?) @ 2013-08-14 5:24 ` Kishon Vijay Abraham I -1 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-14 5:24 UTC (permalink / raw) To: Stephen Warren Cc: benoit.cousson, tony, myungjoo.ham, cw00.choi, rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, balbi Hi, On Wednesday 14 August 2013 12:43 AM, Stephen Warren wrote: > On 08/12/2013 11:37 PM, Kishon Vijay Abraham I wrote: >> The Palmas device contains only a USB VID detector, so added a >> compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible > > s/Dint/Didn't/ > >> diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > >> PALMAS USB COMPARATOR >> Required Properties: >> - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" >> + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or >> + "ti,palmas-usb-vid". > > So are ti,palmas-usb and ti,twl6035-usb full EHCI controllers then? No. I thought I shouldn't remove those if someone is already using those compatible value. Thanks Kishon ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* @ 2013-08-14 5:24 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-14 5:24 UTC (permalink / raw) To: Stephen Warren Cc: benoit.cousson, tony, myungjoo.ham, cw00.choi, rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, balbi Hi, On Wednesday 14 August 2013 12:43 AM, Stephen Warren wrote: > On 08/12/2013 11:37 PM, Kishon Vijay Abraham I wrote: >> The Palmas device contains only a USB VID detector, so added a >> compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible > > s/Dint/Didn't/ > >> diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > >> PALMAS USB COMPARATOR >> Required Properties: >> - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" >> + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or >> + "ti,palmas-usb-vid". > > So are ti,palmas-usb and ti,twl6035-usb full EHCI controllers then? No. I thought I shouldn't remove those if someone is already using those compatible value. Thanks Kishon ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* @ 2013-08-14 5:24 ` Kishon Vijay Abraham I 0 siblings, 0 replies; 40+ messages in thread From: Kishon Vijay Abraham I @ 2013-08-14 5:24 UTC (permalink / raw) To: linux-arm-kernel Hi, On Wednesday 14 August 2013 12:43 AM, Stephen Warren wrote: > On 08/12/2013 11:37 PM, Kishon Vijay Abraham I wrote: >> The Palmas device contains only a USB VID detector, so added a >> compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible > > s/Dint/Didn't/ > >> diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > >> PALMAS USB COMPARATOR >> Required Properties: >> - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" >> + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or >> + "ti,palmas-usb-vid". > > So are ti,palmas-usb and ti,twl6035-usb full EHCI controllers then? No. I thought I shouldn't remove those if someone is already using those compatible value. Thanks Kishon ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* 2013-08-14 5:24 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Kishon Vijay Abraham I @ 2013-08-14 16:08 ` Stephen Warren -1 siblings, 0 replies; 40+ messages in thread From: Stephen Warren @ 2013-08-14 16:08 UTC (permalink / raw) To: Kishon Vijay Abraham I Cc: benoit.cousson, tony, myungjoo.ham, cw00.choi, rob.herring, pawel.moll, mark.rutland, ian.campbell, rob, george.cherian, gregkh, linux-doc, linux-omap, devicetree, linux-arm-kernel, linux, linux-kernel, balbi On 08/13/2013 11:24 PM, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 14 August 2013 12:43 AM, Stephen Warren wrote: >> On 08/12/2013 11:37 PM, Kishon Vijay Abraham I wrote: >>> The Palmas device contains only a USB VID detector, so added a >>> compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible >> >> s/Dint/Didn't/ >> >>> diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> >>> PALMAS USB COMPARATOR >>> Required Properties: >>> - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" >>> + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or >>> + "ti,palmas-usb-vid". >> >> So are ti,palmas-usb and ti,twl6035-usb full EHCI controllers then? > > No. I thought I shouldn't remove those if someone is already using those > compatible value. Sigh. Perhaps it's best to be consistent with the existing bad naming then:-( ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* @ 2013-08-14 16:08 ` Stephen Warren 0 siblings, 0 replies; 40+ messages in thread From: Stephen Warren @ 2013-08-14 16:08 UTC (permalink / raw) To: linux-arm-kernel On 08/13/2013 11:24 PM, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 14 August 2013 12:43 AM, Stephen Warren wrote: >> On 08/12/2013 11:37 PM, Kishon Vijay Abraham I wrote: >>> The Palmas device contains only a USB VID detector, so added a >>> compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible >> >> s/Dint/Didn't/ >> >>> diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> >>> PALMAS USB COMPARATOR >>> Required Properties: >>> - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" >>> + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or >>> + "ti,palmas-usb-vid". >> >> So are ti,palmas-usb and ti,twl6035-usb full EHCI controllers then? > > No. I thought I shouldn't remove those if someone is already using those > compatible value. Sigh. Perhaps it's best to be consistent with the existing bad naming then:-( ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* 2013-08-14 5:24 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Kishon Vijay Abraham I @ 2013-08-15 16:09 ` Benoit Cousson -1 siblings, 0 replies; 40+ messages in thread From: Benoit Cousson @ 2013-08-15 16:09 UTC (permalink / raw) To: Kishon Vijay Abraham I Cc: Stephen Warren, mark.rutland, devicetree, george.cherian, linux, ian.campbell, pawel.moll, linux-doc, tony, gregkh, linux-kernel, rob.herring, cw00.choi, myungjoo.ham, balbi, rob, benoit.cousson, linux-omap, linux-arm-kernel Hi Kishon, On 14/08/2013 07:24, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 14 August 2013 12:43 AM, Stephen Warren wrote: >> On 08/12/2013 11:37 PM, Kishon Vijay Abraham I wrote: >>> The Palmas device contains only a USB VID detector, so added a >>> compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible >> >> s/Dint/Didn't/ >> >>> diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> >>> PALMAS USB COMPARATOR >>> Required Properties: >>> - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" >>> + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or >>> + "ti,palmas-usb-vid". >> >> So are ti,palmas-usb and ti,twl6035-usb full EHCI controllers then? > > No. I thought I shouldn't remove those if someone is already using those > compatible value. Well, I think we still have a short period of time where we can clean some badly defined bindings before it is really too late. Both kernel and DTS are still in sync for the moment, so changing both at the same time should be safe. Regards, Benoit ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* @ 2013-08-15 16:09 ` Benoit Cousson 0 siblings, 0 replies; 40+ messages in thread From: Benoit Cousson @ 2013-08-15 16:09 UTC (permalink / raw) To: linux-arm-kernel Hi Kishon, On 14/08/2013 07:24, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 14 August 2013 12:43 AM, Stephen Warren wrote: >> On 08/12/2013 11:37 PM, Kishon Vijay Abraham I wrote: >>> The Palmas device contains only a USB VID detector, so added a >>> compatible type *ti,palmas-usb-vid*. Dint remove the existing compatible >> >> s/Dint/Didn't/ >> >>> diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt >> >>> PALMAS USB COMPARATOR >>> Required Properties: >>> - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" >>> + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" or >>> + "ti,palmas-usb-vid". >> >> So are ti,palmas-usb and ti,twl6035-usb full EHCI controllers then? > > No. I thought I shouldn't remove those if someone is already using those > compatible value. Well, I think we still have a short period of time where we can clean some badly defined bindings before it is really too late. Both kernel and DTS are still in sync for the moment, so changing both at the same time should be safe. Regards, Benoit ^ permalink raw reply [flat|nested] 40+ messages in thread
end of thread, other threads:[~2013-08-21 12:53 UTC | newest] Thread overview: 40+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-07-16 12:50 [PATCH v2 0/5] ARM: OMAP: DTS/HWMOD/defconfig changes for USB3 Felipe Balbi 2013-07-16 12:50 ` Felipe Balbi 2013-07-16 12:50 ` [PATCH v2 1/5] arm: omap5: dts: fix reg property size Felipe Balbi 2013-07-16 12:50 ` Felipe Balbi 2013-07-16 12:50 ` [PATCH v2 2/5] arm: omap5: dts: fix ocp2scp DTS data Felipe Balbi 2013-07-16 12:50 ` Felipe Balbi 2013-07-16 12:50 ` Felipe Balbi 2013-07-16 12:50 ` [PATCH v2 3/5] arm: omap5: dts: add palmas-usb node Felipe Balbi 2013-07-16 12:50 ` Felipe Balbi 2013-07-16 12:50 ` [PATCH v2 4/5] arm: omap5: hwmod: add missing ocp2scp hwmod data Felipe Balbi 2013-07-16 12:50 ` Felipe Balbi 2013-07-16 12:50 ` [PATCH v2 5/5] arm: omap2plus_defconfig: enable dwc3 and dependencies Felipe Balbi 2013-07-16 12:50 ` Felipe Balbi 2013-08-21 12:53 ` Tony Lindgren 2013-08-21 12:53 ` Tony Lindgren 2013-08-12 10:17 ` [PATCH v3] arm: omap5: dts: add palmas-usb node Kishon Vijay Abraham I 2013-08-12 10:17 ` Kishon Vijay Abraham I 2013-08-12 10:17 ` Kishon Vijay Abraham I 2013-08-12 23:09 ` Stephen Warren 2013-08-12 23:09 ` Stephen Warren 2013-08-13 5:37 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* Kishon Vijay Abraham I 2013-08-13 5:37 ` Kishon Vijay Abraham I 2013-08-13 5:37 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Kishon Vijay Abraham I 2013-08-13 5:37 ` [PATCH v4 2/2] arm: omap5: dts: add palmas-usb node Kishon Vijay Abraham I 2013-08-13 5:37 ` Kishon Vijay Abraham I 2013-08-13 5:37 ` Kishon Vijay Abraham I 2013-08-13 9:54 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* Chanwoo Choi 2013-08-13 9:54 ` Chanwoo Choi 2013-08-13 9:58 ` Kishon Vijay Abraham I 2013-08-13 9:58 ` Kishon Vijay Abraham I 2013-08-13 9:58 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Kishon Vijay Abraham I 2013-08-13 19:13 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* Stephen Warren 2013-08-13 19:13 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Stephen Warren 2013-08-14 5:24 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* Kishon Vijay Abraham I 2013-08-14 5:24 ` Kishon Vijay Abraham I 2013-08-14 5:24 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Kishon Vijay Abraham I 2013-08-14 16:08 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti,palmas-usb-vid* Stephen Warren 2013-08-14 16:08 ` [PATCH 1/2] extcon: palmas: Added a new compatible type *ti, palmas-usb-vid* Stephen Warren 2013-08-15 16:09 ` Benoit Cousson 2013-08-15 16:09 ` Benoit Cousson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.