Re: [PATCH net] skge: dma_sync the whole receive buffer

[poma <pomidorabelisima@gmail.com>]

On 14.08.2013 18:20, Stephen Hemminger wrote:
> On Wed, 14 Aug 2013 12:20:03 +0200
> poma <pomidorabelisima@gmail.com> wrote:
> 
>> On 14.08.2013 03:00, Stephen Hemminger wrote:
>>> On Tue, 13 Aug 2013 15:09:55 -0700 (PDT)
>>> David Miller <davem@davemloft.net> wrote:
>>>
>>>> From: Stephen Hemminger <stephen@networkplumber.org>
>>>> Date: Sat, 10 Aug 2013 15:02:07 -0700
>>>>
>>>>> The DMA sync should sync the whole receive buffer, not just
>>>>> part of it. Fixes log messages dma_sync_check.
>>>>>
>>>>> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
>>>>
>>>> Applied, but I really suspect that your "check DMA mapping errors"
>>>> patch has added a serious regression.  A regression much worse than
>>>> the bug you were trying to fix with that change.
>>>
>>> Argh. The problem is deeper than that. Device got broken somewhere between
>>> 3.2 and 3.4. My old Dlink card works on 3.2 but gets DMA errors on 3.4.
>>> The config's are different though so checking that as well.
>>>
>>
>> Can I help you with debugging?
>> DGE-530T is rather solid device.
> 
> Don't think it is a hardware problem.
> The failure is when the board access the Receive ring PCI memory area.
> This region is allocated with pci_alloc_consistent and therefore should
> be available. Two possible issues are driver math issues, or hardware
> problems with where the region is located. Some of these cards don't
> really have full 64 bit PCI support.
> 
> My board is:
> 05:01.0 Ethernet controller: D-Link System Inc Gigabit Ethernet Adapter (rev 11)
> 	Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter
> 	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
> 	Memory at f7d20000 (32-bit, non-prefetchable) [size=16K]
> 	I/O ports at c000 [size=256]
> 	Expansion ROM at f7d00000 [disabled] [size=128K]
> 	Capabilities: [48] Power Management version 2
> 	Capabilities: [50] Vital Product Data
> 	Kernel driver in use: skge
> 
> 
> What is your config?
> 

01:09.0 Ethernet controller: D-Link System Inc Gigabit Ethernet Adapter
(rev 11)
	Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
	Memory at fbffc000 (32-bit, non-prefetchable) [size=16K]
	I/O ports at b400 [size=256]
	[virtual] Expansion ROM at ec000000 [disabled] [size=128K]
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Vital Product Data
	Kernel driver in use: skge


poma