Re: unable to fetch a repository mentioned in SRC_URI

[Christian Gagneraud <chgans@gna.org>]

On 08/12/2013 06:27 AM, Denys Dmytriyenko wrote:
> On Tue, Aug 06, 2013 at 11:43:08AM +0000, Prathamesh P Ghanekar wrote:
>> Hello,
>>
>> I am trying to integrate meta-ti layer into the current yocto project. I
>> wish to build the image for pandaboard.
>>
>> I am adding another layer called meta-ivi in the yocto kernel which provided
>> functionality for in-vehicle infotainment systems. In the meta-ivi layer,
>> there is a recipe "foton-image", which builds GENIVI compliant baseline
>> image. Also, few recipes were masked to resolve the license issue.
>>
>> So, setting all the variables in the conf/local.conf and conf/bblayers.conf
>> file, I build the image as follows.
>>
>>
>> è bitbake foton-image
>>
>>
>> I ended up with following error, which indicates that there's a failure in fetching the repository.
>>
>> Here is the output log for your reference:
>>
>> prathamesh@mintos ~/workdir/poky-dylan-9.0.1/build $ bitbake foton-image
>> Loading cache: 100% |###################################################################################################################################| ETA:  00:00:00
>> Loaded 1220 entries from dependency cache.
>>
>> Build Configuration:
>> BB_VERSION        = "1.18.0"
>> BUILD_SYS         = "i686-linux"
>> NATIVELSBSTRING   = "LinuxMint-14"
>> TARGET_SYS        = "arm-oe-linux-gnueabi"
>> MACHINE           = "pandaboard"
>> DISTRO            = "poky-ivi-systemd"
>> DISTRO_VERSION    = "4.0.2"
>> TUNE_FEATURES     = "armv7a vfp neon"
>> TARGET_FPU        = "vfp-neon"
>> meta
>> meta-yocto
>> meta-yocto-bsp
>> meta-ivi-4.0.2    = "<unknown>:<unknown>"
>> meta-ti           = "master:c14c386946e1ea341faeea292580e37d538d645d"
>>
>> NOTE: Resolving any missing task queue dependencies
>> NOTE: multiple providers are available for u-boot (u-boot, u-boot-ti-staging)
>> NOTE: consider defining a PREFERRED_PROVIDER entry to match u-boot
>> NOTE: Preparing runqueue
>> NOTE: Executing SetScene Tasks
>> NOTE: Executing RunQueue Tasks
>> WARNING: Failed to fetch URL git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487<http://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487>, attempting MIRRORS if available
>> ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
>> Cloning into bare repository '/home/prathamesh/workdir/poky-dylan-9.0.1/build/downloads/git2/dev.omapzoom.org.pub.scm.integration.kernel-ubuntu.git'...
>>
>> fatal: The remote end hung up unexpectedly
>> fatal: early EOF
>> fatal: index-pack failed
> It seems you had your connection terminated unexpectedly... Have you tried it
> again? Does it happen every time?
> BTW, seems to work fine here...

I ran into similar problems recently (strange git failure), but as I 
didn't have strong need to build new stuff, I simply gave up straight 
away and switched to another task.
The only "odd" thing I have here, is a *@#$! proxy. I am located in New 
Zealand.

Chris

>
>
>> ERROR: Function failed: Fetcher failure for URL: 'git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487<http://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487>'. Unable to fetch URL from any source.
>> ERROR: Logfile of failure stored in: /home/prathamesh/workdir/poky-dylan-9.0.1/build/tmp-eglibc-eglibc/work/pandaboard-oe-linux-gnueabi/linux-omap4/3.4-r0/temp/log.do_fetch.4257
>> ERROR: Task 910 (/home/prathamesh/workdir/meta-ti/recipes-kernel/linux/linux-omap4_3.4.bb<http://linux-omap4_3.4.bb>, do_fetch) failed with exit code '1'
>> NOTE: Tasks Summary: Attempted 2323 tasks of which 2231 didn't need to be rerun and 1 failed.
>> Waiting for 0 running tasks to finish:
>>
>> Summary: 1 task failed:
>>    /home/prathamesh/workdir/meta-ti/recipes-kernel/linux/linux-omap4_3.4.bb<http://linux-omap4_3.4.bb>, do_fetch
>> Summary: There was 1 WARNING message shown.
>> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
>>
>> Note:
>> 1. I have successfully built the foton-image for target vexpressa9, and it
>> boots without any errors in the qemu emulator.
>> 2. I am able to 'git clone' the above mentioned repository. If you could let
>> me know how can I use the local repository for build process. I tried
>> copying the repository in downloads folder, but it did not work somehow.
> You need to get a bare repository and place it into:
> downloads/git2/dev.omapzoom.org.pub.scm.integration.kernel-ubuntu.git
>