From: Benoit Cousson <bcousson@baylibre.com>
To: Kevin Hilman <khilman@linaro.org>, Olof Johansson <olof@lixom.net>
Cc: Tony Lindgren <tony@atomide.com>,
arm@kernel.org,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [GIT PULL] ARM: OMAP: Device Tree for 3.12
Date: Wed, 21 Aug 2013 16:55:57 +0200 [thread overview]
Message-ID: <5214D4FD.4060405@baylibre.com> (raw)
In-Reply-To: <20130821071334.GQ7656@atomide.com>
Hi Kevin & Olof,
I've just updated the branch with the few USB3 patches I missed from Felipe.
So here is a new pull-request.
Thanks,
Benoit
----------------------------------------------------------------
Add the minimal DTS support for DRA7xx based SoC core.
Add the initial support for N900 and gta04 phones.
Enable USB3 on OMAP5 evm board.
Do a lot of various cleanups.
----------------------------------------------------------------
The following changes since commit b36f4be3de1b123d8601de062e7dbfc904f305fb:
Linux 3.11-rc6 (2013-08-18 14:36:53 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.12/dts
for you to fetch changes up to 5903208d4e2c09a3872feba6b9e2e49c64fd07ad:
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies (2013-08-21 16:43:21 +0200)
----------------------------------------------------------------
Afzal Mohammed (2):
ARM: dts: AM4372: cpu(s) node per latest binding
ARM: dts: AM4372: add few nodes
Alexandre Belloni (1):
ARM: dts: AM33XX: Add PMU support
Benoit Cousson (1):
ARM: OMAP5: hwmod: add missing ocp2scp hwmod data
Felipe Balbi (4):
ARM: OMAP5: dts: fix reg property size
ARM: OMAP5: dts: fix ocp2scp DTS data
ARM: OMAP5: dts: add palmas-usb node
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies
Javier Martinez Canillas (5):
ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration
ARM: dts: omap3-igep0020: add mux conf for GPIO LEDs
ARM: dts: omap3-igep0030: add mux conf for GPIO LED
ARM: dts: AM33XX: use pinmux node defined in included file
ARM: dts: AM33XX: don't redefine OCP bus and device nodes
Kishon Vijay Abraham I (1):
ARM: dts: omap5-uevm: Split SMPS10 in two nodes
Lars Poeschel (1):
ARM: dts: AM33xx: Correct gpio #interrupt-cells property
Lee Jones (7):
ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
ARM: dts: Remove '0x's from OMAP3 IGEP0020 DTS file
ARM: dts: Remove '0x's from OMAP3 IGEP0030 DTS file
ARM: dts: Remove '0x's from OMAP3 DTS file
ARM: dts: Remove '0x's from OMAP3430 SDP DTS file
ARM: dts: Remove '0x's from OMAP4 DTS file
ARM: dts: Remove '0x's from OMAP5 DTS file
Marek Belisko (1):
ARM: dts: Add devicetree for gta04 board.
Pavel Machek (1):
ARM: dts: N900: Add device tree
R Sricharan (1):
ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board
Robert Nelson (1):
ARM: dts: omap3-beagle-xm: fix string error in compatible property
Roger Quadros (1):
ARM: dts: omap3-beagle: Make USB host pin naming consistent
Ruslan Bilovol (1):
ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file
arch/arm/boot/dts/Makefile | 5 +-
arch/arm/boot/dts/am335x-bone.dts | 217 ++++++-----
arch/arm/boot/dts/am335x-evm.dts | 576 ++++++++++++++---------------
arch/arm/boot/dts/am335x-evmsk.dts | 374 ++++++++++---------
arch/arm/boot/dts/am33xx.dtsi | 13 +-
arch/arm/boot/dts/am4372.dtsi | 347 +++++++++++++++++
arch/arm/boot/dts/dra7-evm.dts | 140 +++++++
arch/arm/boot/dts/dra7.dtsi | 575 ++++++++++++++++++++++++++++
arch/arm/boot/dts/omap2420-h4.dts | 6 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
arch/arm/boot/dts/omap3-beagle.dts | 24 +-
arch/arm/boot/dts/omap3-gta04.dts | 168 +++++++++
arch/arm/boot/dts/omap3-igep.dtsi | 2 +
arch/arm/boot/dts/omap3-igep0020.dts | 19 +-
arch/arm/boot/dts/omap3-igep0030.dts | 17 +-
arch/arm/boot/dts/omap3-n900.dts | 92 +++++
arch/arm/boot/dts/omap3.dtsi | 2 +-
arch/arm/boot/dts/omap3430-sdp.dts | 22 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 21 +-
arch/arm/boot/dts/omap4-sdp.dts | 21 +-
arch/arm/boot/dts/omap4.dtsi | 2 +-
arch/arm/boot/dts/omap5-uevm.dts | 25 +-
arch/arm/boot/dts/omap5.dtsi | 13 +-
arch/arm/boot/dts/twl6030_omap4.dtsi | 38 ++
arch/arm/configs/omap2plus_defconfig | 9 +
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 +++
include/dt-bindings/pinctrl/dra.h | 50 +++
27 files changed, 2148 insertions(+), 677 deletions(-)
create mode 100644 arch/arm/boot/dts/dra7-evm.dts
create mode 100644 arch/arm/boot/dts/dra7.dtsi
create mode 100644 arch/arm/boot/dts/omap3-gta04.dts
create mode 100644 arch/arm/boot/dts/omap3-n900.dts
create mode 100644 arch/arm/boot/dts/twl6030_omap4.dtsi
create mode 100644 include/dt-bindings/pinctrl/dra.h
On 21/08/2013 09:13, Tony Lindgren wrote:
> Kevin & Olof,
>
> Care to pull the below .dts changes directly from Benoit?
>
> * Benoit Cousson <bcousson@baylibre.com> [130820 08:08]:
>>
>> Hi Tony,
>>
>> Please pull the following commits for OMAP Device Tree for v3.12.
>>
>> Thanks,
>> Benoit
>>
>> ----------------------------------------------------------------
>> Add the minimal DTS support for DRA7xx based SoC core.
>> Add the initial support for N900 and gta04 phones.
>> Do a lot of various cleanups.
>> ----------------------------------------------------------------
>>
>> The following changes since commit b36f4be3de1b123d8601de062e7dbfc904f305fb:
>>
>> Linux 3.11-rc6 (2013-08-18 14:36:53 -0700)
>>
>> are available in the git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.12/dts
>>
>> for you to fetch changes up to 9f311a2325905043718da9bf649e2344b8df8473:
>>
>> ARM: dts: omap3-beagle: Make USB host pin naming consistent (2013-08-20 14:30:07 +0200)
>>
>> ----------------------------------------------------------------
>> Afzal Mohammed (2):
>> ARM: dts: AM4372: cpu(s) node per latest binding
>> ARM: dts: AM4372: add few nodes
>>
>> Alexandre Belloni (1):
>> ARM: dts: AM33XX: Add PMU support
>>
>> Javier Martinez Canillas (5):
>> ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration
>> ARM: dts: omap3-igep0020: add mux conf for GPIO LEDs
>> ARM: dts: omap3-igep0030: add mux conf for GPIO LED
>> ARM: dts: AM33XX: use pinmux node defined in included file
>> ARM: dts: AM33XX: don't redefine OCP bus and device nodes
>>
>> Kishon Vijay Abraham I (1):
>> ARM: dts: omap5-uevm: Split SMPS10 in two nodes
>>
>> Lars Poeschel (1):
>> ARM: dts: AM33xx: Correct gpio #interrupt-cells property
>>
>> Lee Jones (7):
>> ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
>> ARM: dts: Remove '0x's from OMAP3 IGEP0020 DTS file
>> ARM: dts: Remove '0x's from OMAP3 IGEP0030 DTS file
>> ARM: dts: Remove '0x's from OMAP3 DTS file
>> ARM: dts: Remove '0x's from OMAP3430 SDP DTS file
>> ARM: dts: Remove '0x's from OMAP4 DTS file
>> ARM: dts: Remove '0x's from OMAP5 DTS file
>>
>> Marek Belisko (1):
>> ARM: dts: Add devicetree for gta04 board.
>>
>> Pavel Machek (1):
>> ARM: dts: N900: Add device tree
>>
>> R Sricharan (1):
>> ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board
>>
>> Robert Nelson (1):
>> ARM: dts: omap3-beagle-xm: fix string error in compatible property
>>
>> Roger Quadros (1):
>> ARM: dts: omap3-beagle: Make USB host pin naming consistent
>>
>> Ruslan Bilovol (1):
>> ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file
>>
>> arch/arm/boot/dts/Makefile | 5 +-
>> arch/arm/boot/dts/am335x-bone.dts | 217 ++++++-----
>> arch/arm/boot/dts/am335x-evm.dts | 576 +++++++++++++++---------------
>> arch/arm/boot/dts/am335x-evmsk.dts | 374 ++++++++++---------
>> arch/arm/boot/dts/am33xx.dtsi | 13 +-
>> arch/arm/boot/dts/am4372.dtsi | 347 ++++++++++++++++++
>> arch/arm/boot/dts/dra7-evm.dts | 140 ++++++++
>> arch/arm/boot/dts/dra7.dtsi | 575 +++++++++++++++++++++++++++++
>> arch/arm/boot/dts/omap2420-h4.dts | 6 +-
>> arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
>> arch/arm/boot/dts/omap3-beagle.dts | 24 +-
>> arch/arm/boot/dts/omap3-gta04.dts | 168 +++++++++
>> arch/arm/boot/dts/omap3-igep.dtsi | 2 +
>> arch/arm/boot/dts/omap3-igep0020.dts | 19 +-
>> arch/arm/boot/dts/omap3-igep0030.dts | 17 +-
>> arch/arm/boot/dts/omap3-n900.dts | 92 +++++
>> arch/arm/boot/dts/omap3.dtsi | 2 +-
>> arch/arm/boot/dts/omap3430-sdp.dts | 22 +-
>> arch/arm/boot/dts/omap4-panda-common.dtsi | 21 +-
>> arch/arm/boot/dts/omap4-sdp.dts | 21 +-
>> arch/arm/boot/dts/omap4.dtsi | 2 +-
>> arch/arm/boot/dts/omap5-uevm.dts | 13 +-
>> arch/arm/boot/dts/omap5.dtsi | 4 +-
>> arch/arm/boot/dts/twl6030_omap4.dtsi | 38 ++
>> include/dt-bindings/pinctrl/dra.h | 50 +++
>> 25 files changed, 2077 insertions(+), 673 deletions(-)
>> create mode 100644 arch/arm/boot/dts/dra7-evm.dts
>> create mode 100644 arch/arm/boot/dts/dra7.dtsi
>> create mode 100644 arch/arm/boot/dts/omap3-gta04.dts
>> create mode 100644 arch/arm/boot/dts/omap3-n900.dts
>> create mode 100644 arch/arm/boot/dts/twl6030_omap4.dtsi
>> create mode 100644 include/dt-bindings/pinctrl/dra.h
WARNING: multiple messages have this Message-ID (diff)
From: bcousson@baylibre.com (Benoit Cousson)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] ARM: OMAP: Device Tree for 3.12
Date: Wed, 21 Aug 2013 16:55:57 +0200 [thread overview]
Message-ID: <5214D4FD.4060405@baylibre.com> (raw)
In-Reply-To: <20130821071334.GQ7656@atomide.com>
Hi Kevin & Olof,
I've just updated the branch with the few USB3 patches I missed from Felipe.
So here is a new pull-request.
Thanks,
Benoit
----------------------------------------------------------------
Add the minimal DTS support for DRA7xx based SoC core.
Add the initial support for N900 and gta04 phones.
Enable USB3 on OMAP5 evm board.
Do a lot of various cleanups.
----------------------------------------------------------------
The following changes since commit b36f4be3de1b123d8601de062e7dbfc904f305fb:
Linux 3.11-rc6 (2013-08-18 14:36:53 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.12/dts
for you to fetch changes up to 5903208d4e2c09a3872feba6b9e2e49c64fd07ad:
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies (2013-08-21 16:43:21 +0200)
----------------------------------------------------------------
Afzal Mohammed (2):
ARM: dts: AM4372: cpu(s) node per latest binding
ARM: dts: AM4372: add few nodes
Alexandre Belloni (1):
ARM: dts: AM33XX: Add PMU support
Benoit Cousson (1):
ARM: OMAP5: hwmod: add missing ocp2scp hwmod data
Felipe Balbi (4):
ARM: OMAP5: dts: fix reg property size
ARM: OMAP5: dts: fix ocp2scp DTS data
ARM: OMAP5: dts: add palmas-usb node
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies
Javier Martinez Canillas (5):
ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration
ARM: dts: omap3-igep0020: add mux conf for GPIO LEDs
ARM: dts: omap3-igep0030: add mux conf for GPIO LED
ARM: dts: AM33XX: use pinmux node defined in included file
ARM: dts: AM33XX: don't redefine OCP bus and device nodes
Kishon Vijay Abraham I (1):
ARM: dts: omap5-uevm: Split SMPS10 in two nodes
Lars Poeschel (1):
ARM: dts: AM33xx: Correct gpio #interrupt-cells property
Lee Jones (7):
ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
ARM: dts: Remove '0x's from OMAP3 IGEP0020 DTS file
ARM: dts: Remove '0x's from OMAP3 IGEP0030 DTS file
ARM: dts: Remove '0x's from OMAP3 DTS file
ARM: dts: Remove '0x's from OMAP3430 SDP DTS file
ARM: dts: Remove '0x's from OMAP4 DTS file
ARM: dts: Remove '0x's from OMAP5 DTS file
Marek Belisko (1):
ARM: dts: Add devicetree for gta04 board.
Pavel Machek (1):
ARM: dts: N900: Add device tree
R Sricharan (1):
ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board
Robert Nelson (1):
ARM: dts: omap3-beagle-xm: fix string error in compatible property
Roger Quadros (1):
ARM: dts: omap3-beagle: Make USB host pin naming consistent
Ruslan Bilovol (1):
ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file
arch/arm/boot/dts/Makefile | 5 +-
arch/arm/boot/dts/am335x-bone.dts | 217 ++++++-----
arch/arm/boot/dts/am335x-evm.dts | 576 ++++++++++++++---------------
arch/arm/boot/dts/am335x-evmsk.dts | 374 ++++++++++---------
arch/arm/boot/dts/am33xx.dtsi | 13 +-
arch/arm/boot/dts/am4372.dtsi | 347 +++++++++++++++++
arch/arm/boot/dts/dra7-evm.dts | 140 +++++++
arch/arm/boot/dts/dra7.dtsi | 575 ++++++++++++++++++++++++++++
arch/arm/boot/dts/omap2420-h4.dts | 6 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
arch/arm/boot/dts/omap3-beagle.dts | 24 +-
arch/arm/boot/dts/omap3-gta04.dts | 168 +++++++++
arch/arm/boot/dts/omap3-igep.dtsi | 2 +
arch/arm/boot/dts/omap3-igep0020.dts | 19 +-
arch/arm/boot/dts/omap3-igep0030.dts | 17 +-
arch/arm/boot/dts/omap3-n900.dts | 92 +++++
arch/arm/boot/dts/omap3.dtsi | 2 +-
arch/arm/boot/dts/omap3430-sdp.dts | 22 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 21 +-
arch/arm/boot/dts/omap4-sdp.dts | 21 +-
arch/arm/boot/dts/omap4.dtsi | 2 +-
arch/arm/boot/dts/omap5-uevm.dts | 25 +-
arch/arm/boot/dts/omap5.dtsi | 13 +-
arch/arm/boot/dts/twl6030_omap4.dtsi | 38 ++
arch/arm/configs/omap2plus_defconfig | 9 +
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 +++
include/dt-bindings/pinctrl/dra.h | 50 +++
27 files changed, 2148 insertions(+), 677 deletions(-)
create mode 100644 arch/arm/boot/dts/dra7-evm.dts
create mode 100644 arch/arm/boot/dts/dra7.dtsi
create mode 100644 arch/arm/boot/dts/omap3-gta04.dts
create mode 100644 arch/arm/boot/dts/omap3-n900.dts
create mode 100644 arch/arm/boot/dts/twl6030_omap4.dtsi
create mode 100644 include/dt-bindings/pinctrl/dra.h
On 21/08/2013 09:13, Tony Lindgren wrote:
> Kevin & Olof,
>
> Care to pull the below .dts changes directly from Benoit?
>
> * Benoit Cousson <bcousson@baylibre.com> [130820 08:08]:
>>
>> Hi Tony,
>>
>> Please pull the following commits for OMAP Device Tree for v3.12.
>>
>> Thanks,
>> Benoit
>>
>> ----------------------------------------------------------------
>> Add the minimal DTS support for DRA7xx based SoC core.
>> Add the initial support for N900 and gta04 phones.
>> Do a lot of various cleanups.
>> ----------------------------------------------------------------
>>
>> The following changes since commit b36f4be3de1b123d8601de062e7dbfc904f305fb:
>>
>> Linux 3.11-rc6 (2013-08-18 14:36:53 -0700)
>>
>> are available in the git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.12/dts
>>
>> for you to fetch changes up to 9f311a2325905043718da9bf649e2344b8df8473:
>>
>> ARM: dts: omap3-beagle: Make USB host pin naming consistent (2013-08-20 14:30:07 +0200)
>>
>> ----------------------------------------------------------------
>> Afzal Mohammed (2):
>> ARM: dts: AM4372: cpu(s) node per latest binding
>> ARM: dts: AM4372: add few nodes
>>
>> Alexandre Belloni (1):
>> ARM: dts: AM33XX: Add PMU support
>>
>> Javier Martinez Canillas (5):
>> ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration
>> ARM: dts: omap3-igep0020: add mux conf for GPIO LEDs
>> ARM: dts: omap3-igep0030: add mux conf for GPIO LED
>> ARM: dts: AM33XX: use pinmux node defined in included file
>> ARM: dts: AM33XX: don't redefine OCP bus and device nodes
>>
>> Kishon Vijay Abraham I (1):
>> ARM: dts: omap5-uevm: Split SMPS10 in two nodes
>>
>> Lars Poeschel (1):
>> ARM: dts: AM33xx: Correct gpio #interrupt-cells property
>>
>> Lee Jones (7):
>> ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
>> ARM: dts: Remove '0x's from OMAP3 IGEP0020 DTS file
>> ARM: dts: Remove '0x's from OMAP3 IGEP0030 DTS file
>> ARM: dts: Remove '0x's from OMAP3 DTS file
>> ARM: dts: Remove '0x's from OMAP3430 SDP DTS file
>> ARM: dts: Remove '0x's from OMAP4 DTS file
>> ARM: dts: Remove '0x's from OMAP5 DTS file
>>
>> Marek Belisko (1):
>> ARM: dts: Add devicetree for gta04 board.
>>
>> Pavel Machek (1):
>> ARM: dts: N900: Add device tree
>>
>> R Sricharan (1):
>> ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board
>>
>> Robert Nelson (1):
>> ARM: dts: omap3-beagle-xm: fix string error in compatible property
>>
>> Roger Quadros (1):
>> ARM: dts: omap3-beagle: Make USB host pin naming consistent
>>
>> Ruslan Bilovol (1):
>> ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file
>>
>> arch/arm/boot/dts/Makefile | 5 +-
>> arch/arm/boot/dts/am335x-bone.dts | 217 ++++++-----
>> arch/arm/boot/dts/am335x-evm.dts | 576 +++++++++++++++---------------
>> arch/arm/boot/dts/am335x-evmsk.dts | 374 ++++++++++---------
>> arch/arm/boot/dts/am33xx.dtsi | 13 +-
>> arch/arm/boot/dts/am4372.dtsi | 347 ++++++++++++++++++
>> arch/arm/boot/dts/dra7-evm.dts | 140 ++++++++
>> arch/arm/boot/dts/dra7.dtsi | 575 +++++++++++++++++++++++++++++
>> arch/arm/boot/dts/omap2420-h4.dts | 6 +-
>> arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
>> arch/arm/boot/dts/omap3-beagle.dts | 24 +-
>> arch/arm/boot/dts/omap3-gta04.dts | 168 +++++++++
>> arch/arm/boot/dts/omap3-igep.dtsi | 2 +
>> arch/arm/boot/dts/omap3-igep0020.dts | 19 +-
>> arch/arm/boot/dts/omap3-igep0030.dts | 17 +-
>> arch/arm/boot/dts/omap3-n900.dts | 92 +++++
>> arch/arm/boot/dts/omap3.dtsi | 2 +-
>> arch/arm/boot/dts/omap3430-sdp.dts | 22 +-
>> arch/arm/boot/dts/omap4-panda-common.dtsi | 21 +-
>> arch/arm/boot/dts/omap4-sdp.dts | 21 +-
>> arch/arm/boot/dts/omap4.dtsi | 2 +-
>> arch/arm/boot/dts/omap5-uevm.dts | 13 +-
>> arch/arm/boot/dts/omap5.dtsi | 4 +-
>> arch/arm/boot/dts/twl6030_omap4.dtsi | 38 ++
>> include/dt-bindings/pinctrl/dra.h | 50 +++
>> 25 files changed, 2077 insertions(+), 673 deletions(-)
>> create mode 100644 arch/arm/boot/dts/dra7-evm.dts
>> create mode 100644 arch/arm/boot/dts/dra7.dtsi
>> create mode 100644 arch/arm/boot/dts/omap3-gta04.dts
>> create mode 100644 arch/arm/boot/dts/omap3-n900.dts
>> create mode 100644 arch/arm/boot/dts/twl6030_omap4.dtsi
>> create mode 100644 include/dt-bindings/pinctrl/dra.h
next prev parent reply other threads:[~2013-08-21 14:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-20 15:01 [GIT PULL] ARM: OMAP: Device Tree for 3.12 Benoit Cousson
2013-08-20 15:01 ` Benoit Cousson
2013-08-21 7:13 ` Tony Lindgren
2013-08-21 7:13 ` Tony Lindgren
2013-08-21 14:55 ` Benoit Cousson [this message]
2013-08-21 14:55 ` Benoit Cousson
2013-08-23 18:31 ` Kevin Hilman
2013-08-23 18:31 ` Kevin Hilman
2013-08-27 9:43 ` Benoit Cousson
2013-08-27 9:43 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5214D4FD.4060405@baylibre.com \
--to=bcousson@baylibre.com \
--cc=arm@kernel.org \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=olof@lixom.net \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.