From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-mpc85xx
Date: Wed, 21 Aug 2013 10:28:29 -0700 [thread overview]
Message-ID: <5214F8BD.7020800@freescale.com> (raw)
Tom,
The following changes since commit 39bc12ddc36c9e30199471da0f3a929b178a04b2:
SPL: Makefile: Build a separate autoconf.mk for SPL (2013-08-19
18:05:19 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
for you to fetch changes up to b6df9b01fb8c126b212aba92b6523407d3fa60a5:
Makefile: Fix build in a separated directory tree (2013-08-21 09:03:29
-0700)
----------------------------------------------------------------
Prabhakar Kushwaha (1):
powerpc: Fix CamelCase checkpatch warnings
Shaohui Xie (3):
powerpc/common/vsc3316: remove const from vsc3316_config parameter
define
powerpc/t4240: fix lanes routing for QSGMII protocols
powerpc/t4240: add QSGMII interface support
Shengzhou Liu (2):
powerpc/p1010rdb: fix calculating ddr_freq_mhz
powerpc/sec: Add workaround for SEC A-003571
Shruti Kanetkar (2):
powerpc: Use print_size() where appropriate
powerpcv2: Print hardcoded size like print_size() does
Ying Zhang (8):
spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled
some functionality for common SPL
powerpc: mpc85xx: Support booting from SD Card with SPL
powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL
powerpc : spi flash : Support to start from eSPI with SPL
powerpc : p1022ds : Enable p1022ds to start from eSPI with SPL
TPL : introduce the TPL based on the SPL
powerpc: p1022ds: add TPL for p1022ds nand boot
York Sun (2):
SPDX-License-Identifier: clean up license header
Makefile: Fix build in a separated directory tree
??????? ??????? (1):
Fix for incorrect conversion hex string to number (FMAN firmware
address).
Makefile | 50 +++++-
README | 24 +++
arch/powerpc/cpu/mpc824x/cpu.c | 8 +-
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 +
arch/powerpc/cpu/mpc85xx/cpu.c | 45 +++---
arch/powerpc/cpu/mpc85xx/cpu_init.c | 32 ++--
arch/powerpc/cpu/mpc85xx/fdt.c | 12 +-
arch/powerpc/cpu/mpc85xx/speed.c | 142 ++++++++---------
arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 14 +-
arch/powerpc/cpu/mpc85xx/tlb.c | 3 +-
arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 5 +
arch/powerpc/cpu/mpc86xx/cpu.c | 22 +--
arch/powerpc/cpu/mpc86xx/speed.c | 40 ++---
arch/powerpc/cpu/mpc8xx/cpu.c | 24 ++-
arch/powerpc/cpu/mpc8xx/video.c | 4 +-
.../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 4 +
arch/powerpc/cpu/mpc8xxx/ddr/main.c | 3 +-
arch/powerpc/cpu/mpc8xxx/law.c | 6 +-
arch/powerpc/cpu/ppc4xx/cpu.c | 8 +-
arch/powerpc/include/asm/config_mpc85xx.h | 1 +
board/freescale/b4860qds/b4860qds_crossbar_con.h | 12 +-
board/freescale/common/Makefile | 2 -
board/freescale/common/vsc3316_3308.c | 2 +-
board/freescale/common/vsc3316_3308.h | 2 +-
board/freescale/mpc8540ads/mpc8540ads.c | 2 +-
board/freescale/mpc8541cds/mpc8541cds.c | 2 +-
board/freescale/mpc8555cds/mpc8555cds.c | 2 +-
board/freescale/mpc8560ads/mpc8560ads.c | 2 +-
board/freescale/p1010rdb/spl_minimal.c | 2 +-
board/freescale/p1022ds/Makefile | 3 +
board/freescale/p1022ds/spl.c | 121 ++++++++++++++
board/freescale/p1022ds/spl_minimal.c | 53 +------
board/freescale/p1022ds/tlb.c | 23 ++-
board/freescale/p1_p2_rdb_pc/ddr.c | 2 +-
board/freescale/p1_twr/ddr.c | 2 +-
board/freescale/t4qds/eth.c | 80 +++++++---
board/freescale/t4qds/t4240qds.c | 47 +++++-
board/sbc8548/sbc8548.c | 4 +-
board/socrates/socrates.c | 2 +-
board/xes/xpedite537x/ddr.c | 2 +-
common/env_common.c | 2 -
config.mk | 30 +++-
doc/README.TPL | 45 ++++++
doc/README.mpc85xx-sd-spi-boot | 81 ++++++++++
drivers/mmc/Makefile | 3 +
drivers/mmc/fsl_esdhc_spl.c | 115 ++++++++++++++
drivers/mmc/mmc.c | 2 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/fsl_elbc_spl.c | 27 +++-
drivers/mtd/spi/Makefile | 1 +
drivers/mtd/spi/fsl_espi_spl.c | 62 ++++++++
drivers/mtd/spi/spi_flash.c | 2 +
drivers/net/fm/eth.c | 4 +-
drivers/net/fm/memac.c | 1 +
drivers/net/fm/t4240.c | 40 ++++-
drivers/spi/fsl_espi.c | 2 +-
include/configs/MPC8313ERDB.h | 1 -
include/configs/P1022DS.h | 166
++++++++++++++++----
include/configs/p1_p2_rdb_pc.h | 1 -
include/e500.h | 16 +-
include/fsl_esdhc.h | 1 +
include/mpc86xx.h | 6 +-
spl/Makefile | 23 ++-
63 files changed, 1101 insertions(+), 349 deletions(-)
create mode 100644 board/freescale/p1022ds/spl.c
create mode 100644 doc/README.TPL
create mode 100644 doc/README.mpc85xx-sd-spi-boot
create mode 100644 drivers/mmc/fsl_esdhc_spl.c
create mode 100644 drivers/mtd/spi/fsl_espi_spl.c
Thanks.
York
next reply other threads:[~2013-08-21 17:28 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-21 17:28 York Sun [this message]
2013-08-22 15:18 ` [U-Boot] Pull request: u-boot-mpc85xx Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-11-07 4:01 [U-Boot] pull request u-boot-mpc85xx Priyanka Jain
2019-11-07 17:31 ` Tom Rini
2019-11-20 5:45 ` Priyanka Jain
2019-11-20 22:43 ` Tom Rini
2019-11-26 4:49 ` Priyanka Jain
2019-12-02 15:15 ` Tom Rini
2014-01-21 23:07 [U-Boot] Pull " York Sun
2014-01-22 15:33 ` Tom Rini
2013-09-12 17:36 [U-Boot] Pull request: u-boot-mpc85xx York Sun
2013-09-14 1:26 ` Tom Rini
2013-08-20 19:46 [U-Boot] Pull request : u-boot-mpc85xx York Sun
2013-08-21 13:40 ` Tom Rini
2013-08-21 16:10 ` York Sun
2013-08-14 19:11 [U-Boot] Pull request: u-boot-mpc85xx York Sun
2013-08-16 13:35 ` Tom Rini
2013-08-12 22:43 York Sun
2013-08-13 15:38 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5214F8BD.7020800@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.