From: poma <pomidorabelisima@gmail.com>
To: linux-pm@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: WARNING: CPU: 1 PID: 0 at kernel/time/tick-broadcast.c:667
Date: Thu, 22 Aug 2013 04:55:04 +0200 [thread overview]
Message-ID: <52157D88.3070701@gmail.com> (raw)
The miracle is that anyone ever manages to read this from a bunch of
other posts.
Waking up from system sleep state S3:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
PM: Entering mem sleep
PM: suspend of devices complete after 2720.791 msecs
PM: suspend devices took 2.725 seconds
PM: late suspend of devices complete after 3.898 msecs
PM: noirq suspend of devices complete after 88.109 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
microcode: CPU0: new patch_level=0x010000c8
Enabling non-boot CPUs ...
SMP alternatives: lockdep: fixing up alternatives
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector
0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000c8
CPU1 is up
SMP alternatives: lockdep: fixing up alternatives
smpboot: Booting Node 0 Processor 2 APIC 0x2
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector
0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
process: Switch to broadcast mode on CPU2
------------[ cut here ]------------
WARNING: CPU: 2 PID: 0 at kernel/time/tick-broadcast.c:667
tick_broadcast_oneshot_control+0x181/0x190()
Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast
ipt_MASQUERADE ip6table_nat nf_nat_ipv6 ip6table_mangle ip6t_REJECT
nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat
iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack
nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables kvm_amd
kvm snd_hda_codec_realtek skge r8169 edac_core edac_mce_amd k10temp
snd_hda_intel snd_hda_codec microcode serio_raw mii snd_hwdep snd_seq
snd_seq_device snd_pcm snd_page_alloc snd_timer snd soundcore shpchp
i2c_nforce2 acpi_cpufreq mperf nfsd auth_rpcgss nfs_acl lockd sunrpc
nouveau mxm_wmi video i2c_algo_bit drm_kms_helper ttm drm i2c_core
ata_generic pata_acpi pata_amd wmi
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.11.0-0.rc6.git1.2.fc20.x86_64 #1
Hardware name: Gigabyte Technology Co., Ltd. M720-US3/M720-US3, BIOS F7n
09/07/2010
0000000000000009 ffff880118517df0 ffffffff81723666 0000000000000000
ffff880118517e28 ffffffff8107463d 0000000000000002 0000000000000004
ffff88011aa0dec0 0000000000000096 ffffffff81c26d80 ffff880118517e38
Call Trace:
[<ffffffff81723666>] dump_stack+0x54/0x74
[<ffffffff8107463d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff8107471a>] warn_slowpath_null+0x1a/0x20
[<ffffffff810e0ab1>] tick_broadcast_oneshot_control+0x181/0x190
[<ffffffff810df5c8>] clockevents_notify+0x178/0x1a0
[<ffffffff810229f8>] amd_e400_idle+0x78/0x110
[<ffffffff8102329e>] arch_cpu_idle+0x2e/0x40
[<ffffffff810d66e2>] cpu_startup_entry+0xd2/0x410
[<ffffffff81047f1f>] start_secondary+0x22f/0x2e0
---[ end trace 213708ad48d5b2e3 ]---
microcode: CPU2: new patch_level=0x010000c8
CPU2 is up
SMP alternatives: lockdep: fixing up alternatives
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector
0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000c8
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 206.430 msecs
PM: early resume of devices complete after 0.973 msecs
PM: resume of devices complete after 7049.893 msecs
PM: resume devices took 7.054 seconds
PM: Finishing wakeup.
Waking up from system sleep state S4:
PM: Hibernation mode set to 'platform'
PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
PM: Marking nosave pages: [mem 0xdfef0000-0xffffffff]
PM: Marking nosave pages: [mem 0xd4000000-0xd7ffffff]
PM: Basic memory bitmaps created
PM: Syncing filesystems ... done.
PM: Preallocating image memory... done (allocated 118863 pages)
PM: Allocated 475452 kbytes in 0.32 seconds (1485.78 MB/s)
PM: freeze of devices complete after 2244.968 msecs
PM: late freeze of devices complete after 3.680 msecs
PM: noirq freeze of devices complete after 2.578 msecs
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
PM: Creating hibernation image:
PM: Need to copy 118824 pages
PM: Normal pages needed: 118824 + 1024, available pages: 912915
PM: Restoring platform NVS memory
microcode: CPU0: new patch_level=0x010000c8
Enabling non-boot CPUs ...
SMP alternatives: lockdep: fixing up alternatives
smpboot: Booting Node 0 Processor 1 APIC 0x1
LVT offset 1 assigned for vector 0x400
process: Switch to broadcast mode on CPU1
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at kernel/time/tick-broadcast.c:667
tick_broadcast_oneshot_control+0x181/0x190()
Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast
ipt_MASQUERADE ip6table_nat nf_nat_ipv6 ip6table_mangle ip6t_REJECT
nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat
iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack
nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables kvm_amd
kvm snd_hda_codec_realtek snd_hda_intel microcode edac_core edac_mce_amd
snd_hda_codec k10temp r8169 serio_raw snd_hwdep mii skge snd_seq
snd_seq_device snd_pcm snd_page_alloc snd_timer snd i2c_nforce2 shpchp
soundcore acpi_cpufreq mperf nfsd auth_rpcgss nfs_acl lockd sunrpc
nouveau mxm_wmi video i2c_algo_bit drm_kms_helper ttm ata_generic drm
pata_acpi i2c_core pata_amd wmi
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-0.rc6.git1.2.fc20.x86_64 #1
Hardware name: Gigabyte Technology Co., Ltd. M720-US3/M720-US3, BIOS F7n
09/07/2010
0000000000000009 ffff880118515df0 ffffffff81723666 0000000000000000
ffff880118515e28 ffffffff8107463d 0000000000000001 0000000000000004
ffff88011a80dec0 0000000000000096 ffffffff81c26d80 ffff880118515e38
Call Trace:
[<ffffffff81723666>] dump_stack+0x54/0x74
[<ffffffff8107463d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff8107471a>] warn_slowpath_null+0x1a/0x20
[<ffffffff810e0ab1>] tick_broadcast_oneshot_control+0x181/0x190
[<ffffffff810df5c8>] clockevents_notify+0x178/0x1a0
[<ffffffff810229f8>] amd_e400_idle+0x78/0x110
[<ffffffff8102329e>] arch_cpu_idle+0x2e/0x40
[<ffffffff810d66e2>] cpu_startup_entry+0xd2/0x410
[<ffffffff81047f1f>] start_secondary+0x22f/0x2e0
---[ end trace 75625b90d4157f98 ]---
microcode: CPU1: new patch_level=0x010000c8
CPU1 is up
SMP alternatives: lockdep: fixing up alternatives
smpboot: Booting Node 0 Processor 2 APIC 0x2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000c8
CPU2 is up
SMP alternatives: lockdep: fixing up alternatives
smpboot: Booting Node 0 Processor 3 APIC 0x3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000c8
CPU3 is up
ACPI: Waking up from system sleep state S4
PM: noirq restore of devices complete after 15.654 msecs
PM: early restore of devices complete after 1.392 msecs
PM: restore of devices complete after 373.136 msecs
PM: Image restored successfully.
PM: Basic memory bitmaps freed
poma
next reply other threads:[~2013-08-22 2:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-22 2:55 poma [this message]
2013-10-17 9:38 ` WARNING: CPU: 1 PID: 0 at kernel/time/tick-broadcast.c:667 Olaf Hering
2014-01-10 3:00 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52157D88.3070701@gmail.com \
--to=pomidorabelisima@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.