From: Jaehoon Chung <jh80.chung@samsung.com>
To: Yuvaraj Kumar C D <yuvaraj.cd@gmail.com>
Cc: linux-mmc@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
cjb@laptop.org, tgih.jun@samsung.com, alim.akhtar@samsung.com,
ks.giri@samsung.com, t.figa@samsung.com,
Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Subject: Re: [RFC V2 4/4] mmc: dw_mmc: exynos: add a quirk for SMU.
Date: Fri, 23 Aug 2013 21:55:15 +0900 [thread overview]
Message-ID: <52175BB3.5020301@samsung.com> (raw)
In-Reply-To: <1377256509-18922-5-git-send-email-yuvaraj.cd@samsung.com>
Hi Yuvaraj,
Is there dependency with other patch?
I didn't see the defined "DW_MCI_TYPE_EXYNOS5420".
If i missed something, let me know.
Best Regards,
Jaehoon Chung
On 08/23/2013 08:15 PM, Yuvaraj Kumar C D wrote:
> Exynos5420 Mobile Storage Host controller has Security Management Unit
> (SMU) for channel 0 and channel 1 (mainly for eMMC).This patch adds a
> quirk to bypass SMU as it is not being used yet.
>
> This patch is on top of the below patch by Doug Anderson.
> mmc: dw_mmc: Add exynos resume_noirq callback to clear WAKEUP_INT
>
> changes since V1:
> 1.avoid code duplication by calling dw_mci_exynos_priv_init in
> resume path.
>
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
> drivers/mmc/host/dw_mmc-exynos.c | 33 +++++++++++++++++++++++++++++++++
> drivers/mmc/host/dw_mmc.c | 3 +++
> include/linux/mmc/dw_mmc.h | 2 ++
> 3 files changed, 38 insertions(+)
>
> diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
> index 19c845b..8e70fc6 100644
> --- a/drivers/mmc/host/dw_mmc-exynos.c
> +++ b/drivers/mmc/host/dw_mmc-exynos.c
> @@ -35,6 +35,25 @@
> #define EXYNOS4210_FIXED_CIU_CLK_DIV 2
> #define EXYNOS4412_FIXED_CIU_CLK_DIV 4
>
> +/* Block number in eMMC */
> +#define DWMCI_BLOCK_NUM 0xFFFFFFFF
> +
> +#define SDMMC_EMMCP_BASE 0x1000
> +#define SDMMC_MPSECURITY (SDMMC_EMMCP_BASE + 0x0010)
> +#define SDMMC_MPSBEGIN0 (SDMMC_EMMCP_BASE + 0x0200)
> +#define SDMMC_MPSEND0 (SDMMC_EMMCP_BASE + 0x0204)
> +#define SDMMC_MPSCTRL0 (SDMMC_EMMCP_BASE + 0x020C)
> +
> +/* SMU control bits */
> +#define DWMCI_MPSCTRL_SECURE_READ_BIT BIT(7)
> +#define DWMCI_MPSCTRL_SECURE_WRITE_BIT BIT(6)
> +#define DWMCI_MPSCTRL_NON_SECURE_READ_BIT BIT(5)
> +#define DWMCI_MPSCTRL_NON_SECURE_WRITE_BIT BIT(4)
> +#define DWMCI_MPSCTRL_USE_FUSE_KEY BIT(3)
> +#define DWMCI_MPSCTRL_ECB_MODE BIT(2)
> +#define DWMCI_MPSCTRL_ENCRYPTION BIT(1)
> +#define DWMCI_MPSCTRL_VALID BIT(0)
> +
> /* Variations in Exynos specific dw-mshc controller */
> enum dw_mci_exynos_type {
> DW_MCI_TYPE_EXYNOS4210,
> @@ -74,6 +93,16 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
> {
> struct dw_mci_exynos_priv_data *priv = host->priv;
>
> + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420 &&
> + host->pdata->quirks & DW_MCI_QUIRK_BYPASS_SMU) {
> + mci_writel(host, MPSBEGIN0, 0);
> + mci_writel(host, MPSEND0, DWMCI_BLOCK_NUM);
> + mci_writel(host, MPSCTRL0, DWMCI_MPSCTRL_SECURE_WRITE_BIT |
> + DWMCI_MPSCTRL_NON_SECURE_READ_BIT |
> + DWMCI_MPSCTRL_VALID |
> + DWMCI_MPSCTRL_NON_SECURE_WRITE_BIT);
> + }
> +
> return 0;
> }
>
> @@ -106,7 +135,11 @@ static int dw_mci_exynos_suspend(struct device *dev)
> static int dw_mci_exynos_resume(struct device *dev)
> {
> struct dw_mci *host = dev_get_drvdata(dev);
> + struct dw_mci_exynos_priv_data *priv = host->priv;
>
> + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420 &&
> + host->pdata->quirks & DW_MCI_QUIRK_BYPASS_SMU)
> + dw_mci_exynos_priv_init(host);
> return dw_mci_resume(host);
> }
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 0c0cada..49df69f 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2107,6 +2107,9 @@ static struct dw_mci_of_quirks {
> }, {
> .quirk = "broken-cd",
> .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
> + }, {
> + .quirk = "bypass-smu",
> + .id = DW_MCI_QUIRK_BYPASS_SMU,
> },
> };
>
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 198f0fa..2d3f83f 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -209,6 +209,8 @@ struct dw_mci_dma_ops {
> #define DW_MCI_QUIRK_HIGHSPEED BIT(2)
> /* Unreliable card detection */
> #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION BIT(3)
> +/*Bypass the Security management unit*/
> +#define DW_MCI_QUIRK_BYPASS_SMU BIT(4)
>
> /* Slot level quirks */
> /* This slot has no write protect */
>
next prev parent reply other threads:[~2013-08-23 12:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-23 11:15 [RFC V2 0/4] dw_mmc platform specific private data init Yuvaraj Kumar C D
2013-08-23 11:15 ` [RFC V2 1/4] mmc: dw_mmc: exynos: move the exynos private init Yuvaraj Kumar C D
2013-08-23 13:44 ` Jaehoon Chung
2013-08-26 9:20 ` Yuvaraj Kumar
2013-08-27 2:34 ` Jaehoon Chung
2013-08-27 6:03 ` Yuvaraj Kumar
2013-08-23 11:15 ` [RFC V2 2/4] mmc: dw_mmc: socfpga: move socfpga " Yuvaraj Kumar C D
2013-08-23 11:15 ` [RFC V2 3/4] mmc: dw_mmc: move the platform specific init call Yuvaraj Kumar C D
2013-08-23 13:45 ` Jaehoon Chung
2013-08-23 11:15 ` [RFC V2 4/4] mmc: dw_mmc: exynos: add a quirk for SMU Yuvaraj Kumar C D
2013-08-23 12:55 ` Jaehoon Chung [this message]
2013-08-23 13:14 ` Yuvaraj Kumar
2013-08-28 5:46 ` [RFC V2 0/4] dw_mmc platform specific private data init Alim Akhtar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52175BB3.5020301@samsung.com \
--to=jh80.chung@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=cjb@laptop.org \
--cc=ks.giri@samsung.com \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=t.figa@samsung.com \
--cc=tgih.jun@samsung.com \
--cc=yuvaraj.cd@gmail.com \
--cc=yuvaraj.cd@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.