Re: [PATCH v3] driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set.

[Giuseppe CAVALLARO <peppe.cavallaro@st.com>]

hello some comments below

On 8/28/2013 7:40 AM, Sonic Zhang wrote:
> From: Sonic Zhang <sonic.zhang@analog.com>
>
> Some synopsys ip implementation doesn't support DMA store and forward mode,
> such as BF60x. So, set force_thresh_dma_mode to use DMA thresholds only.
> Update document and devicetree as well.
>
> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
> ---
>   Documentation/devicetree/bindings/net/stmmac.txt      | 2 ++
>   Documentation/networking/stmmac.txt                   | 3 +++
>   drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     | 4 +++-
>   drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 +++
>   include/linux/stmmac.h                                | 1 +
>   5 files changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
> index 261c563..56fbcb5 100644
> --- a/Documentation/devicetree/bindings/net/stmmac.txt
> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
> @@ -22,6 +22,8 @@ Required properties:
>   - snps,pbl		Programmable Burst Length
>   - snps,fixed-burst	Program the DMA to use the fixed burst mode
>   - snps,mixed-burst	Program the DMA to use the mixed burst mode
> +- snps,force_thresh_dma_mode	Force DMA to use the Shreshold mode other than

                                                      ^^^^^^^^^ typo


> +				the Store and Forward mode.

if we use this approach you should document that the 
force_thresh_dma_mode and force_sf_dma_mode will force the mode for both 
tx and rx.

I am wondering now what happens if these are passed together from the
platform? is your code covering this scenario?

we could have a unique force_dma_mode that can be:

    rx_force_threshold
    tx_force_threshold
    rx_force_sf
    tx_force_sf
               ( these can be defined in the stmmac.h platform header )

but this an impact on all the platforms that already use the 
force_sf_dma_mode as we said

In this case you should fix this and maybe the patch should be for 
net-next (add it in the subject next time).

peppe

>
>   Optional properties:
>   - mac-address: 6 bytes, mac address
> diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
> index 654d2e5..457b8bb 100644
> --- a/Documentation/networking/stmmac.txt
> +++ b/Documentation/networking/stmmac.txt
> @@ -123,6 +123,7 @@ struct plat_stmmacenet_data {
>   	int bugged_jumbo;
>   	int pmt;
>   	int force_sf_dma_mode;
> +	int force_thresh_dma_mode;
>   	int riwt_off;
>   	void (*fix_mac_speed)(void *priv, unsigned int speed);
>   	void (*bus_setup)(void __iomem *ioaddr);
> @@ -159,6 +160,8 @@ Where:
>    o pmt: core has the embedded power module (optional).
>    o force_sf_dma_mode: force DMA to use the Store and Forward mode
>   		     instead of the Threshold.
> + o force_thresh_dma_mode: force DMA to use the Shreshold mode other than
> +		     the Store and Forward mode.
>    o riwt_off: force to disable the RX watchdog feature and switch to NAPI mode.
>    o fix_mac_speed: this callback is used for modifying some syscfg registers
>   		 (on ST SoCs) according to the link speed negotiated by the
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index be40691..8d4ccd3 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -1224,7 +1224,9 @@ static void free_dma_desc_resources(struct stmmac_priv *priv)
>    */
>   static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
>   {
> -	if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
> +	if (priv->plat->force_thresh_dma_mode)
> +		priv->hw->dma->dma_mode(priv->ioaddr, tc, tc);
> +	else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
>   		/*
>   		 * In case of GMAC, SF mode can be enabled
>   		 * to perform the TX COE in HW. This depends on:
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index da8be6e..865c944 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -79,6 +79,9 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
>   	of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
>   	dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
>   	dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
> +	plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
> +	if (plat->force_thresh_dma_mode)
> +		plat->force_sf_dma_mode = 0;
>
>   	return 0;
>   }
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index 9e495d31..bb5deb0 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -108,6 +108,7 @@ struct plat_stmmacenet_data {
>   	int bugged_jumbo;
>   	int pmt;
>   	int force_sf_dma_mode;
> +	int force_thresh_dma_mode;
>   	int riwt_off;
>   	void (*fix_mac_speed)(void *priv, unsigned int speed);
>   	void (*bus_setup)(void __iomem *ioaddr);
>