[U-Boot] [PATCH v2 2/7] USB: XHCI: Add xHCI host controller support for Exynos5

[Dan Murphy <dmurphy@ti.com>]

On 08/21/2013 05:12 AM, Vivek Gautam wrote:
> This adds driver layer for xHCI controller in Samsung's
> exynos5 soc. This interacts with xHCI host controller stack.
>
> Signed-off-by: Vikas C Sajjan <vikas.sajjan@samsung.com>
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> Cc: Julius Werner <jwerner@chromium.org>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Minkyu Kang <mk7.kang@samsung.com>
> Cc: Dan Murphy <dmurphy@ti.com>
> Cc: Marek Vasut <marex@denx.de>
> ---
>  arch/arm/include/asm/arch-exynos/cpu.h         |    8 +
>  arch/arm/include/asm/arch-exynos/xhci-exynos.h |   90 +++++++
>  drivers/usb/host/Makefile                      |    1 +
>  drivers/usb/host/xhci-exynos5.c                |  324 ++++++++++++++++++++++++
>  include/linux/usb/dwc3.h                       |  190 ++++++++++++++
>  5 files changed, 613 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/include/asm/arch-exynos/xhci-exynos.h
>  create mode 100644 drivers/usb/host/xhci-exynos5.c
>  create mode 100644 include/linux/usb/dwc3.h
>
> diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
> index cb924fb..0d2b511 100644
> --- a/arch/arm/include/asm/arch-exynos/cpu.h
> +++ b/arch/arm/include/asm/arch-exynos/cpu.h
> @@ -50,6 +50,8 @@
>  #define EXYNOS4_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4_DMC_PHY_BASE		DEVICE_NOT_AVAILABLE
> +#define EXYNOS4_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
> +#define EXYNOS4_USB3PHY_BASE		DEVICE_NOT_AVAILABLE
>  
>  /* EXYNOS4X12 */
>  #define EXYNOS4X12_GPIO_PART3_BASE	0x03860000
> @@ -85,6 +87,8 @@
>  #define EXYNOS4X12_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4X12_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4X12_DMC_PHY_BASE		DEVICE_NOT_AVAILABLE
> +#define EXYNOS4X12_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
> +#define EXYNOS4X12_USB3PHY_BASE		DEVICE_NOT_AVAILABLE
>  
>  /* EXYNOS5 Common*/
>  #define EXYNOS5_I2C_SPACING		0x10000
> @@ -103,6 +107,8 @@
>  #define EXYNOS5_DMC_CTRL_BASE		0x10DD0000
>  #define EXYNOS5_GPIO_PART1_BASE		0x11400000
>  #define EXYNOS5_MIPI_DSIM_BASE		0x11D00000
> +#define EXYNOS5_USB_HOST_XHCI_BASE	0x12000000
> +#define EXYNOS5_USB3PHY_BASE		0x12100000
>  #define EXYNOS5_USB_HOST_EHCI_BASE	0x12110000
>  #define EXYNOS5_USBPHY_BASE		0x12130000
>  #define EXYNOS5_USBOTG_BASE		0x12140000
> @@ -217,7 +223,9 @@ SAMSUNG_BASE(swreset, SWRESET)
>  SAMSUNG_BASE(timer, PWMTIMER_BASE)
>  SAMSUNG_BASE(uart, UART_BASE)
>  SAMSUNG_BASE(usb_phy, USBPHY_BASE)
> +SAMSUNG_BASE(usb3_phy, USB3PHY_BASE)
>  SAMSUNG_BASE(usb_ehci, USB_HOST_EHCI_BASE)
> +SAMSUNG_BASE(usb_xhci, USB_HOST_XHCI_BASE)
>  SAMSUNG_BASE(usb_otg, USBOTG_BASE)
>  SAMSUNG_BASE(watchdog, WATCHDOG_BASE)
>  SAMSUNG_BASE(power, POWER_BASE)
> diff --git a/arch/arm/include/asm/arch-exynos/xhci-exynos.h b/arch/arm/include/asm/arch-exynos/xhci-exynos.h
> new file mode 100644
> index 0000000..acbb37d
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-exynos/xhci-exynos.h
> @@ -0,0 +1,90 @@
> +/* Copyright (c) 2012 Samsung Electronics Co. Ltd
> + *
> + * Exynos Phy register definitions
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */

Needs new license unless you only want to restrict this to GPL v2

> +
> +#ifndef _ASM_ARCH_XHCI_EXYNOS_H_
> +#define _ASM_ARCH_XHCI_EXYNOS_H_
> +
> +/* Phy register MACRO definitions */
> +
> +#define LINKSYSTEM_FLADJ_MASK			(0x3f << 1)
> +#define LINKSYSTEM_FLADJ(_x)			((_x) << 1)
> +#define LINKSYSTEM_XHCI_VERSION_CONTROL		(0x1 << 27)
> +
> +#define PHYUTMI_OTGDISABLE			(1 << 6)
> +#define PHYUTMI_FORCESUSPEND			(1 << 1)
> +#define PHYUTMI_FORCESLEEP			(1 << 0)
> +
> +#define PHYCLKRST_SSC_REFCLKSEL_MASK		(0xff << 23)
> +#define PHYCLKRST_SSC_REFCLKSEL(_x)		((_x) << 23)
> +
> +#define PHYCLKRST_SSC_RANGE_MASK		(0x03 << 21)
> +#define PHYCLKRST_SSC_RANGE(_x)			((_x) << 21)
> +
> +#define PHYCLKRST_SSC_EN			(0x1 << 20)
> +#define PHYCLKRST_REF_SSP_EN			(0x1 << 19)
> +#define PHYCLKRST_REF_CLKDIV2			(0x1 << 18)
> +
> +#define PHYCLKRST_MPLL_MULTIPLIER_MASK		(0x7f << 11)
> +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF	(0x19 << 11)
> +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF	(0x02 << 11)
> +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF	(0x68 << 11)
> +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF	(0x7d << 11)
> +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF	(0x02 << 11)
> +
> +#define PHYCLKRST_FSEL_MASK			(0x3f << 5)
> +#define PHYCLKRST_FSEL(_x)			((_x) << 5)
> +#define PHYCLKRST_FSEL_PAD_100MHZ		(0x27 << 5)
> +#define PHYCLKRST_FSEL_PAD_24MHZ		(0x2a << 5)
> +#define PHYCLKRST_FSEL_PAD_20MHZ		(0x31 << 5)
> +#define PHYCLKRST_FSEL_PAD_19_2MHZ		(0x38 << 5)
> +
> +#define PHYCLKRST_RETENABLEN			(0x1 << 4)
> +
> +#define PHYCLKRST_REFCLKSEL_MASK		(0x03 << 2)
> +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK		(0x2 << 2)
> +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK		(0x3 << 2)
> +
> +#define PHYCLKRST_PORTRESET			(0x1 << 1)
> +#define PHYCLKRST_COMMONONN			(0x1 << 0)
> +
> +#define PHYPARAM0_REF_USE_PAD			(0x1 << 31)
> +#define PHYPARAM0_REF_LOSLEVEL_MASK		(0x1f << 26)
> +#define PHYPARAM0_REF_LOSLEVEL			(0x9 << 26)
> +
> +#define PHYPARAM1_PCS_TXDEEMPH_MASK		(0x1f << 0)
> +#define PHYPARAM1_PCS_TXDEEMPH			(0x1c)
> +
> +#define PHYTEST_POWERDOWN_SSP			(0x1 << 3)
> +#define PHYTEST_POWERDOWN_HSP			(0x1 << 2)
> +
> +#define PHYBATCHG_UTMI_CLKSEL			(0x1 << 2)
> +
> +#define FSEL_CLKSEL_24M				(0x5)
> +
> +/* XHCI PHY register structure */
> +struct exynos_usb3_phy {
> +	unsigned int reserve1;
> +	unsigned int link_system;
> +	unsigned int phy_utmi;
> +	unsigned int phy_pipe;
> +	unsigned int phy_clk_rst;
> +	unsigned int phy_reg0;
> +	unsigned int phy_reg1;
> +	unsigned int phy_param0;
> +	unsigned int phy_param1;
> +	unsigned int phy_term;
> +	unsigned int phy_test;
> +	unsigned int phy_adp;
> +	unsigned int phy_batchg;
> +	unsigned int phy_resume;
> +	unsigned int reserve2[3];
> +	unsigned int link_port;
> +};
> +
> +#endif /* _ASM_ARCH_XHCI_EXYNOS_H_ */
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 6bd6c86..eb50bc1 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -44,6 +44,7 @@ COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
>  
>  # xhci
>  COBJS-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
> +COBJS-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
>  
>  COBJS	:= $(COBJS-y)
>  SRCS	:= $(COBJS:.o=.c)
> diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c
> new file mode 100644
> index 0000000..d5796c0
> --- /dev/null
> +++ b/drivers/usb/host/xhci-exynos5.c
> @@ -0,0 +1,324 @@
> +/*
> + * SAMSUNG EXYNOS5 USB HOST XHCI Controller
> + *
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + *	Vivek Gautam <gautam.vivek@samsung.com>
> + *	Vikas Sajjan <vikas.sajjan@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +

Needs new license

> +/*
> + * This file is a conglomeration for DWC3-init sequence and further
> + * exynos5 specific PHY-init sequence.
> + */
> +
> +#include <common.h>
> +#include <fdtdec.h>
> +#include <libfdt.h>
> +#include <malloc.h>
> +#include <usb.h>
> +#include <watchdog.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/power.h>
> +#include <asm/arch/xhci-exynos.h>
> +#include <asm-generic/errno.h>
> +#include <linux/compat.h>
> +#include <linux/usb/dwc3.h>
> +
> +#include "xhci.h"
> +
> +/* Declare global data pointer */
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/**
> + * Contains pointers to register base addresses
> + * for the usb controller.
> + */
> +struct exynos_xhci {
> +	struct exynos_usb3_phy *usb3_phy;
> +	struct xhci_hccr *hcd;
> +	struct dwc3 *dwc3_reg;
> +};
> +
> +static struct exynos_xhci exynos;
> +
> +#ifdef CONFIG_OF_CONTROL
> +static int exynos_usb3_parse_dt(const void *blob, struct exynos_xhci *exynos)
> +{
> +	fdt_addr_t addr;
> +	unsigned int node;
> +	int depth;
> +
> +	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_XHCI);
> +	if (node <= 0) {
> +		debug("XHCI: Can't get device node for xhci\n");
> +		return -ENODEV;
> +	}
> +
> +	/*
> +	 * Get the base address for XHCI controller from the device node
> +	 */
> +	addr = fdtdec_get_addr(blob, node, "reg");
> +	if (addr == FDT_ADDR_T_NONE) {
> +		debug("Can't get the XHCI register base address\n");
> +		return -ENXIO;
> +	}
> +	exynos->hcd = (struct xhci_hccr *)addr;
> +
> +	depth = 0;
> +	node = fdtdec_next_compatible_subnode(blob, node,
> +				COMPAT_SAMSUNG_EXYNOS5_USB3_PHY, &depth);
> +	if (node <= 0) {
> +		debug("XHCI: Can't get device node for usb3-phy controller\n");
> +		return -ENODEV;
> +	}
> +
> +	/*
> +	 * Get the base address for usbphy from the device node
> +	 */
> +	exynos->usb3_phy = (struct exynos_usb3_phy *)fdtdec_get_addr(blob, node,
> +								"reg");
> +	if (exynos->usb3_phy == NULL) {
> +		debug("Can't get the usbphy register address\n");
> +		return -ENXIO;
> +	}
> +
> +	return 0;
> +}
> +#endif
> +
> +static void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy)
> +{
> +	u32 reg;
> +
> +	/* enabling usb_drd phy */
> +	set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_EN);
> +
> +	/* Reset USB 3.0 PHY */
> +	writel(0x0, &phy->phy_reg0);
> +
> +	clrbits_le32(&phy->phy_param0,
> +			/* Select PHY CLK source */
> +			PHYPARAM0_REF_USE_PAD |
> +			/* Set Loss-of-Signal Detector sensitivity */
> +			PHYPARAM0_REF_LOSLEVEL_MASK);
> +	setbits_le32(&phy->phy_param0, PHYPARAM0_REF_LOSLEVEL);
> +
> +	writel(0x0, &phy->phy_resume);
> +
> +	/*
> +	 * Setting the Frame length Adj value[6:1] to default 0x20
> +	 * See xHCI 1.0 spec, 5.2.4
> +	 */
> +	setbits_le32(&phy->link_system,
> +			LINKSYSTEM_XHCI_VERSION_CONTROL |
> +			LINKSYSTEM_FLADJ(0x20));
> +
> +	/* Set Tx De-Emphasis level */
> +	clrbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH_MASK);
> +	setbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH);
> +
> +	setbits_le32(&phy->phy_batchg, PHYBATCHG_UTMI_CLKSEL);
> +
> +	/* PHYTEST POWERDOWN Control */
> +	clrbits_le32(&phy->phy_test,
> +			PHYTEST_POWERDOWN_SSP |
> +			PHYTEST_POWERDOWN_HSP);
> +
> +	/* UTMI Power Control */
> +	writel(PHYUTMI_OTGDISABLE, &phy->phy_utmi);
> +
> +		/* Use core clock from main PLL */
> +	reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
> +		/* Default 24Mhz crystal clock */
> +		PHYCLKRST_FSEL(FSEL_CLKSEL_24M) |
> +		PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
> +		PHYCLKRST_SSC_REFCLKSEL(0x88) |
> +		/* Force PortReset of PHY */
> +		PHYCLKRST_PORTRESET |
> +		/* Digital power supply in normal operating mode */
> +		PHYCLKRST_RETENABLEN |
> +		/* Enable ref clock for SS function */
> +		PHYCLKRST_REF_SSP_EN |
> +		/* Enable spread spectrum */
> +		PHYCLKRST_SSC_EN |
> +		/* Power down HS Bias and PLL blocks in suspend mode */
> +		PHYCLKRST_COMMONONN;
> +
> +	writel(reg, &phy->phy_clk_rst);
> +
> +	/* giving time to Phy clock to settle before resetting */
> +	udelay(10);
> +
> +	reg &= ~PHYCLKRST_PORTRESET;
> +	writel(reg, &phy->phy_clk_rst);
> +}
> +
> +static void exynos5_usb3_phy_exit(struct exynos_usb3_phy *phy)
> +{
> +	setbits_le32(&phy->phy_utmi,
> +			PHYUTMI_OTGDISABLE |
> +			PHYUTMI_FORCESUSPEND |
> +			PHYUTMI_FORCESLEEP);
> +
> +	clrbits_le32(&phy->phy_clk_rst,
> +			PHYCLKRST_REF_SSP_EN |
> +			PHYCLKRST_SSC_EN |
> +			PHYCLKRST_COMMONONN);
> +
> +	/* PHYTEST POWERDOWN Control to remove leakage current */
> +	setbits_le32(&phy->phy_test,
> +			PHYTEST_POWERDOWN_SSP |
> +			PHYTEST_POWERDOWN_HSP);
> +
> +	/* disabling usb_drd phy */
> +	set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_DISABLE);
> +}
> +
> +void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
> +{
> +	clrsetbits_le32(&dwc3_reg->g_ctl,
> +			DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG),
> +			DWC3_GCTL_PRTCAPDIR(mode));
> +}
> +
> +static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg)
> +{
> +	/* Before Resetting PHY, put Core in Reset */
> +	setbits_le32(&dwc3_reg->g_ctl,
> +			DWC3_GCTL_CORESOFTRESET);
> +
> +	/* Assert USB3 PHY reset */
> +	setbits_le32(&dwc3_reg->g_usb3pipectl[0],
> +			DWC3_GUSB3PIPECTL_PHYSOFTRST);
> +
> +	/* Assert USB2 PHY reset */
> +	setbits_le32(&dwc3_reg->g_usb2phycfg,
> +			DWC3_GUSB2PHYCFG_PHYSOFTRST);
> +
> +	mdelay(100);
> +
> +	/* Clear USB3 PHY reset */
> +	clrbits_le32(&dwc3_reg->g_usb3pipectl[0],
> +			DWC3_GUSB3PIPECTL_PHYSOFTRST);
> +
> +	/* Clear USB2 PHY reset */
> +	clrbits_le32(&dwc3_reg->g_usb2phycfg,
> +			DWC3_GUSB2PHYCFG_PHYSOFTRST);
> +
> +	/* After PHYs are stable we can take Core out of reset state */
> +	clrbits_le32(&dwc3_reg->g_ctl,
> +			DWC3_GCTL_CORESOFTRESET);
> +}
> +
> +static int dwc3_core_init(struct dwc3 *dwc3_reg)
> +{
> +	u32 reg;
> +	u32 revision;
> +	unsigned int dwc3_hwparams1;
> +
> +	revision = readl(&dwc3_reg->g_snpsid);
> +	/* This should read as U3 followed by revision number */
> +	if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) {
> +		printf("this is not a DesignWare USB3 DRD Core\n");

Use puts for non-arg based logging

> +		return -1;
> +	}
> +
> +	dwc3_core_soft_reset(dwc3_reg);
> +
> +	dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1);
> +
> +	reg = readl(&dwc3_reg->g_ctl);
> +	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
> +	reg &= ~DWC3_GCTL_DISSCRAMBLE;
> +	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) {
> +	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
> +		reg &= ~DWC3_GCTL_DSBLCLKGTNG;
> +		break;
> +	default:
> +		debug("No power optimization available\n");
> +	}
> +
> +	/*
> +	 * WORKAROUND: DWC3 revisions <1.90a have a bug
> +	 * where the device can fail to connect at SuperSpeed
> +	 * and falls back to high-speed mode which causes
> +	 * the device to enter a Connect/Disconnect loop
> +	 */
> +	if ((revision & DWC3_REVISION_MASK) < 0x190a)
> +		reg |= DWC3_GCTL_U2RSTECN;
> +
> +	writel(reg, &dwc3_reg->g_ctl);
> +
> +	return 0;
> +}
> +
> +static int exynos_xhci_core_init(struct exynos_xhci *exynos)
> +{
> +	int ret;
> +
> +	exynos5_usb3_phy_init(exynos->usb3_phy);
> +
> +	ret = dwc3_core_init(exynos->dwc3_reg);
> +	if (ret) {
> +		debug("failed to initialize core\n");
> +		return -1;
> +	}
> +
> +	/* We are hard-coding DWC3 core to Host Mode */
> +	dwc3_set_mode(exynos->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
> +
> +	return 0;
> +}
> +
> +static void exynos_xhci_core_exit(struct exynos_xhci *exynos)
> +{
> +	exynos5_usb3_phy_exit(exynos->usb3_phy);
> +}
> +
> +int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
> +{
> +	struct exynos_xhci *ctx = &exynos;
> +
> +#ifdef CONFIG_OF_CONTROL
> +	exynos_usb3_parse_dt(gd->fdt_blob, ctx);
> +#else
> +	ctx->usb3_phy = (struct exynos_usb3_phy *)samsung_get_base_usb3_phy();
> +	ctx->hcd = (struct xhci_hccr *)samsung_get_base_usb_xhci();
> +#endif
> +
> +	ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
> +
> +	exynos_xhci_core_init(ctx);
> +
> +	*hccr = (ctx->hcd);
> +	*hcor = (struct xhci_hcor *)((uint32_t) *hccr
> +				+ HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
> +
> +	debug("Exynos5-xhci: init hccr %x and hcor %x hc_length %d\n",
> +		(uint32_t)*hccr, (uint32_t)*hcor,
> +		(uint32_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
> +
> +	return 0;
> +}
> +
> +void xhci_hcd_stop(int index)
> +{
> +	struct exynos_xhci *ctx = &exynos;
> +
> +	exynos_xhci_core_exit(ctx);
> +}
> diff --git a/include/linux/usb/dwc3.h b/include/linux/usb/dwc3.h
> new file mode 100644
> index 0000000..933c894
> --- /dev/null
> +++ b/include/linux/usb/dwc3.h
> @@ -0,0 +1,190 @@
> +/* include/linux/usb/dwc3.h
> + *
> + * Copyright (c) 2012 Samsung Electronics Co. Ltd
> + *
> + * Designware SuperSpeed USB 3.0 DRD Controller global and OTG registers
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +

Needs new license unless you only want to restrict this to GPL v2

> +#ifndef __DWC3_H_
> +#define __DWC3_H_
> +
> +/* Global constants */
> +#define DWC3_ENDPOINTS_NUM			32
> +
> +#define DWC3_EVENT_BUFFERS_SIZE			PAGE_SIZE
> +#define DWC3_EVENT_TYPE_MASK			0xfe
> +
> +#define DWC3_EVENT_TYPE_DEV			0
> +#define DWC3_EVENT_TYPE_CARKIT			3
> +#define DWC3_EVENT_TYPE_I2C			4
> +
> +#define DWC3_DEVICE_EVENT_DISCONNECT		0
> +#define DWC3_DEVICE_EVENT_RESET			1
> +#define DWC3_DEVICE_EVENT_CONNECT_DONE		2
> +#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE	3
> +#define DWC3_DEVICE_EVENT_WAKEUP		4
> +#define DWC3_DEVICE_EVENT_EOPF			6
> +#define DWC3_DEVICE_EVENT_SOF			7
> +#define DWC3_DEVICE_EVENT_ERRATIC_ERROR		9
> +#define DWC3_DEVICE_EVENT_CMD_CMPL		10
> +#define DWC3_DEVICE_EVENT_OVERFLOW		11
> +
> +#define DWC3_GEVNTCOUNT_MASK			0xfffc
> +#define DWC3_GSNPSID_MASK			0xffff0000
> +#define DWC3_GSNPSID_SHIFT			16
> +#define DWC3_GSNPSREV_MASK			0xffff
> +
> +#define DWC3_REVISION_MASK			0xffff
> +
> +#define DWC3_REG_OFFSET				0xC100
> +
> +struct g_event_buffer {
> +	u64 g_evntadr;
> +	u32 g_evntsiz;
> +	u32 g_evntcount;
> +};
> +
> +struct d_physical_endpoint {
> +	u32 d_depcmdpar2;
> +	u32 d_depcmdpar1;
> +	u32 d_depcmdpar0;
> +	u32 d_depcmd;
> +};
> +
> +struct dwc3 {					/* offset: 0xC100 */
> +	u32 g_sbuscfg0;
> +	u32 g_sbuscfg1;
> +	u32 g_txthrcfg;
> +	u32 g_rxthrcfg;
> +	u32 g_ctl;
> +
> +	u32 reserved1;
> +
> +	u32 g_sts;
> +
> +	u32 reserved2;
> +
> +	u32 g_snpsid;
> +	u32 g_gpio;
> +	u32 g_uid;
> +	u32 g_uctl;
> +	u64 g_buserraddr;
> +	u64 g_prtbimap;
> +
> +	u32 g_hwparams0;
> +	u32 g_hwparams1;
> +	u32 g_hwparams2;
> +	u32 g_hwparams3;
> +	u32 g_hwparams4;
> +	u32 g_hwparams5;
> +	u32 g_hwparams6;
> +	u32 g_hwparams7;
> +
> +	u32 g_dbgfifospace;
> +	u32 g_dbgltssm;
> +	u32 g_dbglnmcc;
> +	u32 g_dbgbmu;
> +	u32 g_dbglspmux;
> +	u32 g_dbglsp;
> +	u32 g_dbgepinfo0;
> +	u32 g_dbgepinfo1;
> +
> +	u64 g_prtbimap_hs;
> +	u64 g_prtbimap_fs;
> +
> +	u32 reserved3[28];
> +
> +	u32 g_usb2phycfg[16];
> +	u32 g_usb2i2cctl[16];
> +	u32 g_usb2phyacc[16];
> +	u32 g_usb3pipectl[16];
> +
> +	u32 g_txfifosiz[32];
> +	u32 g_rxfifosiz[32];
> +
> +	struct g_event_buffer g_evnt_buf[32];
> +
> +	u32 g_hwparams8;
> +
> +	u32 reserved4[63];
> +
> +	u32 d_cfg;
> +	u32 d_ctl;
> +	u32 d_evten;
> +	u32 d_sts;
> +	u32 d_gcmdpar;
> +	u32 d_gcmd;
> +
> +	u32 reserved5[2];
> +
> +	u32 d_alepena;
> +
> +	u32 reserved6[55];
> +
> +	struct d_physical_endpoint d_phy_ep_cmd[32];
> +
> +	u32 reserved7[128];
> +
> +	u32 o_cfg;
> +	u32 o_ctl;
> +	u32 o_evt;
> +	u32 o_evten;
> +	u32 o_sts;
> +
> +	u32 reserved8[3];
> +
> +	u32 adp_cfg;
> +	u32 adp_ctl;
> +	u32 adp_evt;
> +	u32 adp_evten;
> +
> +	u32 bc_cfg;
> +
> +	u32 reserved9;
> +
> +	u32 bc_evt;
> +	u32 bc_evten;
> +};
> +
> +/* Global Configuration Register */
> +#define DWC3_GCTL_PWRDNSCALE(n)			((n) << 19)
> +#define DWC3_GCTL_U2RSTECN			(1 << 16)
> +#define DWC3_GCTL_RAMCLKSEL(x)			\
> +		(((x) & DWC3_GCTL_CLK_MASK) << 6)
> +#define DWC3_GCTL_CLK_BUS			(0)
> +#define DWC3_GCTL_CLK_PIPE			(1)
> +#define DWC3_GCTL_CLK_PIPEHALF			(2)
> +#define DWC3_GCTL_CLK_MASK			(3)
> +#define DWC3_GCTL_PRTCAP(n)			(((n) & (3 << 12)) >> 12)
> +#define DWC3_GCTL_PRTCAPDIR(n)			((n) << 12)
> +#define DWC3_GCTL_PRTCAP_HOST			1
> +#define DWC3_GCTL_PRTCAP_DEVICE			2
> +#define DWC3_GCTL_PRTCAP_OTG			3
> +#define DWC3_GCTL_CORESOFTRESET			(1 << 11)
> +#define DWC3_GCTL_SCALEDOWN(n)			((n) << 4)
> +#define DWC3_GCTL_SCALEDOWN_MASK		DWC3_GCTL_SCALEDOWN(3)
> +#define DWC3_GCTL_DISSCRAMBLE			(1 << 3)
> +#define DWC3_GCTL_DSBLCLKGTNG			(1 << 0)
> +
> +/* Global HWPARAMS1 Register */
> +#define DWC3_GHWPARAMS1_EN_PWROPT(n)		(((n) & (3 << 24)) >> 24)
> +#define DWC3_GHWPARAMS1_EN_PWROPT_NO		0
> +#define DWC3_GHWPARAMS1_EN_PWROPT_CLK		1
> +
> +/* Global USB2 PHY Configuration Register */
> +#define DWC3_GUSB2PHYCFG_PHYSOFTRST		(1 << 31)
> +#define DWC3_GUSB2PHYCFG_SUSPHY			(1 << 6)
> +
> +/* Global USB3 PIPE Control Register */
> +#define DWC3_GUSB3PIPECTL_PHYSOFTRST		(1 << 31)
> +#define DWC3_GUSB3PIPECTL_SUSPHY		(1 << 17)
> +
> +/* Global TX Fifo Size Register */
> +#define DWC3_GTXFIFOSIZ_TXFDEF(n)		((n) & 0xffff)
> +#define DWC3_GTXFIFOSIZ_TXFSTADDR(n)		((n) & 0xffff0000)
> +
> +#endif /* __DWC3_H_ */

total: 0 errors, 0 warnings, 13 checks, 644 lines checked

-- 
------------------
Dan Murphy