From: Daiane Angolini <daiane.angolini@freescale.com>
To: "meta-freescale@yoctoproject.org" <meta-freescale@yoctoproject.org>
Subject: Re: Direct FB HFP - core-image-directfb
Date: Tue, 3 Sep 2013 14:54:57 -0300 [thread overview]
Message-ID: <52262271.4010807@freescale.com> (raw)
In-Reply-To: <5225E69A.3090000@freescale.com>
On 09/03/2013 10:39 AM, Daiane Angolini wrote:
> I found this "benchmark" for Directfb.
>
> # df_dok
>
> Please, see the results.
>
On the previous email I sent Directfb was bot accelerated by GPU.
Please, see new results.
> (*) DirectFB/Input: Keyboard 0.9 (directfb.org)
> (*) DirectFB/Input: Hot-plug detection enabled with Input Hub Driver
> (*) Using the default feature settings.
*******
> (*) DirectFB/Graphics: Vivante unknown chip model 1.0 (Vivante)
*******
> (*) DirectFB/Core/WM: Default 0.3 (directfb.org)
> (*) FBDev/Mode: Setting 1024x768 RGB16
> (*) FBDev/Mode: Switched to 1024x768 (virtual 1024x768) at 16 bit (RGB16), pitch 2048
> (*) FBDev/Mode: Setting 1024x768 RGB16
> (*) FBDev/Mode: Switched to 1024x768 (virtual 1024x768) at 16 bit (RGB16), pitch 2048
> (*) Direct/Interface: Loaded 'PNG' implementation of 'IDirectFBImageProvider'.
> (*) Direct/Interface: Loaded 'FT2' implementation of 'IDirectFBFont'.
> (*) Direct/Interface: Using 'GIF' implementation of 'IDirectFBImageProvider'.
>
> Benchmarking 256x256 on 1024x743 RGB16 (16bit)...
>
> Anti-aliased Text 3.001 secs (* 789.336 KChars/sec) [100.0%]
> Anti-aliased Text (blend) 3.005 secs (* 788.286 KChars/sec) [100.0%]
> Fill Rectangle 3.177 secs (* 550.774 MPixel/sec) [ 13.2%]
> Fill Rectangle (blend) 3.175 secs (* 549.057 MPixel/sec) [ 13.8%]
> Fill Rectangles [10] 4.177 secs (* 564.830 MPixel/sec) [ 2.3%]
> Fill Rectangles [10] (blend) 4.074 secs (* 563.024 MPixel/sec) [ 2.7%]
> Fill Triangles 3.033 secs (* 220.398 MPixel/sec) [ 23.4%]
> Fill Triangles (blend) 3.039 secs (* 219.962 MPixel/sec) [ 23.7%]
> Draw Rectangle 3.004 secs (* 57.789 KRects/sec) [100.0%]
> Draw Rectangle (blend) 3.026 secs (* 49.900 KRects/sec) [ 88.0%]
> Draw Lines [10] 3.033 secs (* 375.206 KLines/sec) [ 80.1%]
> Draw Lines [10] (blend) 3.048 secs (* 238.188 KLines/sec) [ 53.2%]
> Fill Spans 3.017 secs (* 308.455 MPixel/sec) [ 51.1%]
> Fill Spans (blend) 3.029 secs (* 255.306 MPixel/sec) [ 43.0%]
> Fill Trapezoids [10] 3.291 secs ( 219.050 MPixel/sec) [ 17.0%]
> Blit 5.054 secs (* 504.422 MPixel/sec) [ 5.3%]
> Blit 180 5.242 secs (* 453.826 MPixel/sec) [ 4.7%]
> Blit colorkeyed 4.920 secs (* 538.141 MPixel/sec) [ 6.0%]
> Blit destination colorkeyed 4.922 secs (* 537.922 MPixel/sec) [ 5.6%]
> Blit with format conversion 5.472 secs (* 410.797 MPixel/sec) [ 4.5%]
> Blit with colorizing 3.191 secs (* 492.906 MPixel/sec) [ 16.6%]
> Blit from 32bit (blend) 5.316 secs (* 414.223 MPixel/sec) [ 6.5%]
> Blit from 32bit (blend) with colorizing 3.253 secs (* 406.955 MPixel/sec) [ 14.1%]
> Blit SrcOver (premultiplied source) 5.356 secs (* 414.800 MPixel/sec) [ 6.5%]
> Blit SrcOver (premultiply source) 5.314 secs (* 414.378 MPixel/sec) [ 6.4%]
> Stretch Blit 4.232 secs (* 204.863 MPixel/sec) [ 4.2%]
> Stretch Blit colorkeyed 4.243 secs (* 205.635 MPixel/sec) [ 3.5%]
See that several tests now has 13% or 3% or 16% or 50% (less than
previous result)
>> Benchmarking 256x256 on 1024x743 RGB16 (16bit)...
>>
>> Anti-aliased Text 3.020 secs ( 138.278
>> KChars/sec) [100.0%]
>> Anti-aliased Text (blend) 3.052 secs ( 43.643
>> KChars/sec) [100.0%]
>> Fill Rectangle 3.002 secs ( 709.500
>> MPixel/sec) [100.0%]
>> Fill Rectangle (blend) 3.734 secs ( 8.775
>> MPixel/sec) [100.2%]
>> Fill Rectangles [10] 3.025 secs ( 736.602
>> MPixel/sec) [100.3%]
>> Fill Rectangles [10] (blend) 7.452 secs ( 8.794
>> MPixel/sec) [100.0%]
>> Fill Triangles 3.007 secs ( 389.031
>> MPixel/sec) [100.3%]
>> Fill Triangles (blend) 3.035 secs ( 8.637
>> MPixel/sec) [100.0%]
>> Draw Rectangle 3.001 secs ( 38.853
>> KRects/sec) [100.0%]
>> Draw Rectangle (blend) 3.016 secs ( 3.348
>> KRects/sec) [100.0%]
>> Draw Lines [10] 3.004 secs ( 125.166
>> KLines/sec) [100.0%]
>> Draw Lines [10] (blend) 3.008 secs ( 14.295
>> KLines/sec) [100.3%]
>> Fill Spans 3.010 secs ( 511.659
>> MPixel/sec) [100.0%]
>> Fill Spans (blend) 3.004 secs ( 8.726
>> MPixel/sec) [100.3%]
>> Fill Trapezoids [10] 3.092 secs ( 572.274
>> MPixel/sec) [100.0%]
>> Blit 3.007 secs ( 374.865
>> MPixel/sec) [100.3%]
>> Blit 180 3.006 secs ( 200.575
>> MPixel/sec) [100.0%]
>> Blit colorkeyed 3.016 secs ( 162.970
>> MPixel/sec) [100.0%]
>> Blit destination colorkeyed 3.430 secs ( 11.464
>> MPixel/sec) [100.0%]
>> Blit with format conversion 3.041 secs ( 107.754
>> MPixel/sec) [100.0%]
>> Blit with colorizing 3.120 secs ( 23.105
>> MPixel/sec) [100.0%]
>> Blit from 32bit (blend) 4.216 secs ( 4.663
>> MPixel/sec) [100.2%]
>> Blit from 32bit (blend) with colorizing 3.273 secs ( 6.006
>> MPixel/sec) [100.0%]
>> Blit SrcOver (premultiplied source) 3.584 secs ( 7.314
>> MPixel/sec) [100.2%]
>> Blit SrcOver (premultiply source) 3.959 secs ( 6.621
>> MPixel/sec) [100.2%]
>> Stretch Blit 3.040 secs ( 143.109
>> MPixel/sec) [100.0%]
>> Stretch Blit colorkeyed 3.060 secs ( 138.716
>> MPixel/sec) [100.0%]
>
>
> Anyone could comment?
>
> I'm trying other resolutions as well....
>
>
>
--
Daiane
prev parent reply other threads:[~2013-09-03 17:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-03 13:39 Direct FB HFP - core-image-directfb Daiane Angolini
2013-09-03 17:54 ` Daiane Angolini [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52262271.4010807@freescale.com \
--to=daiane.angolini@freescale.com \
--cc=meta-freescale@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.