From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stanimir Varbanov Subject: Re: [PATCH 1/2] hwspinlock/omap: add support for dt nodes Date: Wed, 04 Sep 2013 11:09:57 +0300 Message-ID: <5226EAD5.8070400@mm-sol.com> References: <1378230767-54931-1-git-send-email-s-anna@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1378230767-54931-1-git-send-email-s-anna@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Suman Anna Cc: Ohad Ben-Cohen , Tony Lindgren , Benoit Cousson , Kumar Gala , linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org List-Id: linux-omap@vger.kernel.org Hi Suman, Thanks for the patch. On 09/03/2013 08:52 PM, Suman Anna wrote: > HwSpinlock IP is present only on OMAP4 and other newer SoCs, > which are all device-tree boot only. This patch adds the > base support for parsing the DT nodes, and removes the code > dealing with the traditional platform device instantiation. > > Signed-off-by: Suman Anna > --- > .../devicetree/bindings/hwlock/omap-hwspinlock.txt | 28 ++++++++++ > arch/arm/mach-omap2/Makefile | 3 -- > arch/arm/mach-omap2/hwspinlock.c | 60 ---------------------- > drivers/hwspinlock/omap_hwspinlock.c | 21 ++++++-- > 4 files changed, 45 insertions(+), 67 deletions(-) > create mode 100644 Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt > delete mode 100644 arch/arm/mach-omap2/hwspinlock.c > > diff --git a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt > new file mode 100644 > index 0000000..adfb8ad > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt > @@ -0,0 +1,28 @@ > +OMAP4+ HwSpinlock Driver > + > +Required properties: > +- compatible: Currently supports only "ti,omap4-hwspinlock" for > + OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs > +- reg: Contains the hwspinlock register address range (base > + address and length) > +- ti,hwmods: Name of the hwmod associated with the hwspinlock device > + > +Optional properties: > +- base_id: Base Id for the locks for a particular hwspinlock Could you rename base_id to base-id. The property name convention is to use dashes in DT world. regards, Stan